Request: Pre-Soldered Network Card Pins

[airpanther]

We've been using these 6 pin connectors on the Teensy 4.1 (w/pins) to make the network pins easily accessible. Similar to your ethernet kit, but attached to the bottom of the Teensy and using longer pins to reach a socket on the PCB. This has worked great, however for scale, it would be great to have the option to pay a little extra and have something like this already attached. Is that possible?

https://www.digikey.com/en/products/detail/samtec-inc/MTMM-103-09-G-D-280/8213921

Thanks,
Robert

 

[MichaelMeissner]

Because proto supplies does the hand soldering, it won't scale up for large purchases, but they do offer Teensy 4.1's with the network headers, and various PSram/flash chips soldered in:

• https://protosupplies.com/product/teensy-4-1-fully-loaded/
• https://protosupplies.com/product/teensy-4-1-fully-loaded-for-prototyping-system/
• https://protosupplies.com/product/teensy-4-1-ethernet-kit/

 

[airpanther]

Great to know. I will check them out. Thank you!

Robert