PDA

View Full Version : Teensy 3.0 pinout PDF in easy to find place?



JBeale
11-07-2012, 08:15 PM
I left my Teensy 3 card at home, and I want to reference the pinout. There was a very nicely organized PDF showing the same image as the card, with the pinout on both sides, in one of the Kickstarter updates, but I don't remember which one, it takes a while to page through them- is there some easy-to-find place on the forum or pjrc.com proper with general T3 reference material?

Update: this is what I was looking for (www.pjrc.com/teensy/ doesn't apparently link to them.)
http://www.pjrc.com/teensy/card5a.pdf
http://www.pjrc.com/teensy/card5b.pdf

Nantonos
11-09-2012, 09:08 AM
In particular, one would expect to fnd the 3.0 pinout info by going to the pinouts page
http://www.pjrc.com/teensy/pinout.html

bboyes
07-06-2013, 07:57 PM
Thanks, I was just looking (again) for the same data and also wondering why it wasn't with the other Teensy pinout diagrams.

Bruce

PaulStoffregen
07-08-2013, 07:10 PM
All the pinout reference cards are on this page:

http://www.pjrc.com/teensy/pinout.html

Elkniwt
12-16-2013, 06:05 PM
All the pinout reference cards are on this page:

http://www.pjrc.com/teensy/pinout.html

I have a Teensy 3.1 and I see that both pin 1 and pin 5 are labelled in the pinout as "TX1", although pin 5 is much more dimly labelled. What do the dim labels mean? There are many such dim duplications, and I can't find an explanation anywhere.

Thanks.

Constantin
12-16-2013, 06:10 PM
I have a Teensy 3.1 and I see that both pin 1 and pin 5 are labelled in the pinout as "TX1", although pin 5 is much more dimly labelled. What do the dim labels mean?

That means that the pin can, given some work, be configured as an alternative pin for that signal. However, most users are likely to leave all the pin designations 'as is' and so you can likely ignore the dim label.

However, if you need to move inputs/outputs around due to pin conflicts, these are the pins that Paul has set aside as alternatives. HTH.

Nantonos
12-16-2013, 06:30 PM
For more on alternate pin functions see this thread (http://forum.pjrc.com/threads/431).

Elkniwt
12-16-2013, 06:34 PM
Thanks so much guys. That definitely helps.