vKeyboard

Status
Not open for further replies.

willwade

New member
Hi there
I'm looking to connect a PC up to a mac so that any virtual keystrokes made on a on-screen keyboard are collected by the teensy and sent to the mac (its for a disabled person who uses an eyegaze system on a PC and wants to control his DJ software).

To do this I was thinking something like the "vKeyboard" project at http://www.pjrc.com/teensy/projects.html (about 15 from the bottom). I note that it states "Two Teensy boards communicating via the onboard UART, to "remote control"another PC (or other devices with USB keyboard capability)." and the image looks like its actually two teensy's connected to each other. Does anybody have any more tips on doing this? I'm going to take a wild guess that it looks somewhat like the code here http://www.pjrc.com/teensy/td_uart.html - but is it simply connecting pins 2 and 3 of a teensy 2 to pins 3 & 2 of another teensy??! It can't be right? If so - thats my kind of soldering!

w

Many thanks

Will
 
Last edited:
Status
Not open for further replies.
Back
Top