PDA

View Full Version : Teensy Audio Board Behaviour after Controller Reset



pinkesh
04-18-2016, 01:40 PM
Hello ,

We have used Teensy audio board with our custom board .
We have configured Teensy with following parameters .SYS_MCLK = 12 MHz from custom board which runs without any OS and SGTL as I2S master with sample frequency equal to 8 KHz .

In our scenario ,
If reset event occurred due to Watchdog timer, We are not able to configure Teensy again .
Is there any work-around so that we can reset/reconfigure audio board after controller reset event ?

- Pinkesh