thedalles77
11-06-2017, 03:56 AM
12001
Teensyduino Code, Eagle layout and PDF documentation at:
https://github.com/thedalles77/Pi_Teensy_Laptop
Features
• Circuit board connects Teensy to 24 pin 1mm pitch FPC connector and breaks out all other I/O
• Scans a KFRMBA151B Sony Vaio keyboard and sends keypresses over USB.
• Communicates via PS/2 with the Sony Vaio touchpad and sends the data over USB
• Replaces the control pad for a M.NT68676 video board
• Receives commands over I2C to shut down power or reset the laptop
I converted a Sony Vaio PCG-K25 to a Raspberry Pi 3 laptop with a Teensy ++2.0 as the controller for the keyboard, Touchpad, and Video Card.
The following picture shows the Teensy and other boards in the laptop.
11999
This is the finished laptop
12000
Teensyduino Code, Eagle layout and PDF documentation at:
https://github.com/thedalles77/Pi_Teensy_Laptop
Features
• Circuit board connects Teensy to 24 pin 1mm pitch FPC connector and breaks out all other I/O
• Scans a KFRMBA151B Sony Vaio keyboard and sends keypresses over USB.
• Communicates via PS/2 with the Sony Vaio touchpad and sends the data over USB
• Replaces the control pad for a M.NT68676 video board
• Receives commands over I2C to shut down power or reset the laptop
I converted a Sony Vaio PCG-K25 to a Raspberry Pi 3 laptop with a Teensy ++2.0 as the controller for the keyboard, Touchpad, and Video Card.
The following picture shows the Teensy and other boards in the laptop.
11999
This is the finished laptop
12000