20:21:28.632 (ports 5): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:21:28.634 (ports 5): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#863660#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:21:28.634 (ports 5): found_usb_device, loc=usb:0/140000/0/8/7 Port_#0007.Hub_#0003 20:21:28.634 (ports 5): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0275 20:21:28.634 (ports 5): found_usb_device, devinst=0000001e 20:21:28.634 (ports 5): add: loc=usb:0/140000/0/8/7, class=Ports, vid=16C0, pid=0483, ver=0275, serial=863660, dev=\\?\usb#vid_16c0&pid_0483#863660#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:21:28.634 (ports 5): comport_from_devinst_list attempt 20:21:28.634 (ports 5): found Ports in classguid_list at index=0 20:21:28.634 (ports 5): port COM19 found from devnode 20:21:28.634 (ports 5): found_usb_device complete 20:21:28.635 (ports 5): usb_add: usb:0/140000/0/8/7 COM19 (Teensy 3.2) Serial 20:21:28.635 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:21:28.637 (ports 5): nothing new, skipping HID & Ports enum 20:21:28.642 (ports 5): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:21:28.643 (ports 5): nothing new, skipping HID & Ports enum 20:21:28.679 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:21:28.680 (ports 5): nothing new, skipping HID & Ports enum 20:22:18.512 (post_compile 1): Begin, version=1.46-beta8, high-res time 20:22:18.823 (loader): Teensy Loader 1.46-beta8, begin program 20:22:18.954 (loader): Listening for remote control on port 3149 20:22:18.954 (loader): initialized, showing main window 20:22:18.970 (loader): remote connection 1352 opened 20:22:18.970 (loader): remote cmd from 1352: "comment: Teensyduino 1.46-beta8 - WINDOWS (teensy_post_compile)" 20:22:18.970 (loader): remote cmd from 1352: "status" 20:22:18.980 (post_compile 1): Sending command: comment: Teensyduino 1.46-beta8 - WINDOWS (teensy_post_compile) 20:22:18.985 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:22:18.985 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:22:18.985 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:22:18.985 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:22:18.985 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:22:18.985 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:22:18.985 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:22:18.985 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:22:18.985 (loader): HID/win32: vid:051D pid:0002 ver:0106 20:22:18.985 (loader): remote cmd from 1352: "dir:T:\TEMP\arduino_build_10720\" 20:22:18.985 (loader): remote cmd from 1352: "file:ssd1306_FlexIO_128x32_spi_muilti.ino.hex" 20:22:18.993 (post_compile 1): Status: 0, 0, 0, 0, 0, 0, T:\TEMP\arduino_build_370569\, SPI_Transfer_test.ino.hex 20:22:18.993 (post_compile 1): Sending command: dir:T:\TEMP\arduino_build_10720\ 20:22:18.994 (post_compile 1): Sending command: file:ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:19.001 (loader): File "ssd1306_FlexIO_128x32_spi_muilti.ino.hex". 54316 bytes, 3% used 20:22:19.008 (loader): remote cmd from 1352: "status" 20:22:19.008 (loader): remote cmd from 1352: "auto:on" 20:22:19.011 (post_compile 1): Status: 1, 0, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:19.011 (post_compile 1): Sending command: auto:on 20:22:19.012 (post_compile 1): Disconnect 20:22:19.023 (loader): remote connection 1352 closed 20:22:19.553 (post_compile 2): Begin, version=1.46-beta8, high-res time 20:22:19.555 (loader): remote connection 1352 opened 20:22:19.555 (loader): remote cmd from 1352: "comment: Teensyduino 1.46-beta8 - WINDOWS (teensy_post_compile)" 20:22:19.555 (loader): remote cmd from 1352: "status" 20:22:19.555 (loader): remote cmd from 1352: "dir:T:\TEMP\arduino_build_10720\" 20:22:19.555 (loader): remote cmd from 1352: "file:ssd1306_FlexIO_128x32_spi_muilti.ino.hex" 20:22:19.555 (loader): File "ssd1306_FlexIO_128x32_spi_muilti.ino.hex". 54316 bytes, 3% used 20:22:19.557 (post_compile 2): Sending command: comment: Teensyduino 1.46-beta8 - WINDOWS (teensy_post_compile) 20:22:19.559 (post_compile 2): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:19.559 (post_compile 2): Sending command: dir:T:\TEMP\arduino_build_10720\ 20:22:19.559 (post_compile 2): Sending command: file:ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:19.571 (loader): remote cmd from 1352: "status" 20:22:19.573 (post_compile 2): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:19.573 (post_compile 2): Disconnect 20:22:19.600 (loader): remote connection 1352 closed 20:22:19.601 (post_compile 3): Running teensy_reboot: "T:\arduino-1.8.8T4_146\hardware\teensy\..\tools\teensy_reboot.exe" teensy_reboot.exe "-board=TEENSY40" "-port=usb:0/140000/0/8/7" "-portlabel=COM20 (Teensy 4-Beta) Serial" "-portprotocol=Teensy" 20:22:19.601 (loader): remote connection 1424 opened 20:22:19.640 (reboot 4): Begin, version=1.46-beta8, high-res time 20:22:19.640 (reboot 4): location = usb:0/140000/0/8/7 20:22:19.640 (reboot 4): portprotocol = Teensy 20:22:19.640 (reboot 4): portlabel = COM20 (Teensy 4-Beta) Serial 20:22:19.640 (reboot 4): Only location usb:0/140000/0/8/7 will be tried 20:22:19.640 (reboot 4): LoadLibrary cfgmgr32 ok 20:22:19.640 (reboot 4): LoadLibrary ntdll ok 20:22:19.640 (loader): remote connection 1428 opened 20:22:19.640 (loader): remote cmd from 1428: "show:arduino_attempt_reboot" 20:22:19.640 (loader): got request to show arduino rebooting message 20:22:19.640 (loader): remote cmd from 1428: "comment: Teensyduino 1.46-beta8 - WINDOWS (teensy_reboot)" 20:22:19.640 (loader): remote cmd from 1428: "status" 20:22:19.640 (loader): remote cmd from 1428: "status" 20:22:19.642 (reboot 4): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#868130#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:22:19.642 (reboot 4): found_usb_device, loc=usb:0/140000/0/8/3 Port_#0003.Hub_#0003 20:22:19.642 (reboot 4): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0275 20:22:19.642 (reboot 4): found_usb_device, devinst=00000005 20:22:19.642 (reboot 4): add: loc=usb:0/140000/0/8/3, class=Ports, vid=16C0, pid=0483, ver=0275, serial=868130, dev=\\?\usb#vid_16c0&pid_0483#868130#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:22:19.642 (reboot 4): comport_from_devinst_list attempt 20:22:19.642 (reboot 4): found Ports in classguid_list at index=0 20:22:19.642 (reboot 4): port COM13 found from devnode 20:22:19.642 (reboot 4): found_usb_device complete 20:22:19.642 (reboot 4): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#863660#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:22:19.642 (reboot 4): found_usb_device, loc=usb:0/140000/0/8/7 Port_#0007.Hub_#0003 20:22:19.642 (reboot 4): found_usb_device, devinst=00000006 20:22:19.642 (reboot 4): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0275 20:22:19.642 (reboot 4): add: loc=usb:0/140000/0/8/7, class=Ports, vid=16C0, pid=0483, ver=0275, serial=863660, dev=\\?\usb#vid_16c0&pid_0483#863660#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:22:19.642 (reboot 4): comport_from_devinst_list attempt 20:22:19.642 (reboot 4): found Ports in classguid_list at index=0 20:22:19.642 (reboot 4): port COM19 found from devnode 20:22:19.642 (reboot 4): found_usb_device complete 20:22:19.648 (reboot 4): found Teensy Loader, version 1.46 20:22:19.648 (reboot 4): Sending command: show:arduino_attempt_reboot 20:22:19.650 (reboot 4): Sending command: comment: Teensyduino 1.46-beta8 - WINDOWS (teensy_reboot) 20:22:19.652 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:19.652 (reboot 4): do_reset (serial) COM19 20:22:19.654 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:19.654 (reboot 4): status read, retry 0 20:22:19.756 (loader): remote cmd from 1428: "status" 20:22:19.758 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:19.758 (reboot 4): status read, retry 1 20:22:19.872 (loader): remote cmd from 1428: "status" 20:22:19.874 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:19.874 (reboot 4): status read, retry 2 20:22:19.988 (loader): remote cmd from 1428: "status" 20:22:19.990 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:19.990 (reboot 4): status read, retry 3 20:22:20.104 (loader): remote cmd from 1428: "status" 20:22:20.106 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:20.106 (reboot 4): status read, retry 4 20:22:20.226 (loader): remote cmd from 1428: "status" 20:22:20.228 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:20.228 (reboot 4): status read, retry 5 20:22:20.342 (loader): remote cmd from 1428: "status" 20:22:20.344 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:20.344 (reboot 4): status read, retry 6 20:22:20.457 (loader): remote cmd from 1428: "status" 20:22:20.459 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:20.459 (reboot 4): status read, retry 7 20:22:20.574 (loader): remote cmd from 1428: "status" 20:22:20.575 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:20.575 (reboot 4): status read, retry 8 20:22:20.689 (loader): remote cmd from 1428: "status" 20:22:20.691 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:20.691 (reboot 4): status read, retry 9 20:22:20.805 (loader): remote cmd from 1428: "status" 20:22:20.807 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:20.807 (reboot 4): status read, retry 10 20:22:20.928 (loader): remote cmd from 1428: "status" 20:22:20.931 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:20.931 (reboot 4): status read, retry 11 20:22:21.043 (loader): remote cmd from 1428: "status" 20:22:21.045 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:21.045 (reboot 4): status read, retry 12 20:22:21.159 (loader): remote cmd from 1428: "status" 20:22:21.161 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:21.161 (reboot 4): status read, retry 13 20:22:21.275 (loader): remote cmd from 1428: "status" 20:22:21.277 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:21.277 (reboot 4): status read, retry 14 20:22:21.391 (loader): remote cmd from 1428: "status" 20:22:21.393 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:21.393 (reboot 4): status read, retry 15 20:22:21.507 (loader): remote cmd from 1428: "status" 20:22:21.509 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:21.509 (reboot 4): status read, retry 16 20:22:21.629 (loader): remote cmd from 1428: "status" 20:22:21.631 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:21.631 (reboot 4): status read, retry 17 20:22:21.745 (loader): remote cmd from 1428: "status" 20:22:21.747 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:21.747 (reboot 4): status read, retry 18 20:22:21.861 (loader): remote cmd from 1428: "status" 20:22:21.863 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:21.863 (reboot 4): status read, retry 19 20:22:21.977 (loader): remote cmd from 1428: "status" 20:22:21.979 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:21.979 (reboot 4): status read, retry 20 20:22:22.093 (loader): remote cmd from 1428: "status" 20:22:22.095 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:22.095 (reboot 4): status read, retry 21 20:22:22.209 (loader): remote cmd from 1428: "status" 20:22:22.211 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:22.211 (reboot 4): status read, retry 22 20:22:22.331 (loader): remote cmd from 1428: "status" 20:22:22.333 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:22.333 (reboot 4): status read, retry 23 20:22:22.447 (loader): remote cmd from 1428: "status" 20:22:22.449 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:22.449 (reboot 4): status read, retry 24 20:22:22.563 (loader): remote cmd from 1428: "status" 20:22:22.565 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:22.565 (reboot 4): status read, retry 25 20:22:22.678 (loader): remote cmd from 1428: "status" 20:22:22.681 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:22.681 (reboot 4): status read, retry 26 20:22:22.794 (loader): remote cmd from 1428: "status" 20:22:22.796 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:22.796 (reboot 4): status read, retry 27 20:22:22.910 (loader): remote cmd from 1428: "status" 20:22:22.912 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:22.912 (reboot 4): status read, retry 28 20:22:23.032 (loader): remote cmd from 1428: "status" 20:22:23.034 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:23.034 (reboot 4): status read, retry 29 20:22:23.148 (loader): remote cmd from 1428: "status" 20:22:23.150 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:23.150 (reboot 4): status read, retry 30 20:22:23.263 (loader): remote cmd from 1428: "status" 20:22:23.265 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:23.265 (reboot 4): status read, retry 31 20:22:23.379 (loader): remote cmd from 1428: "status" 20:22:23.381 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:23.381 (reboot 4): status read, retry 32 20:22:23.495 (loader): remote cmd from 1428: "status" 20:22:23.497 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:23.497 (reboot 4): status read, retry 33 20:22:23.610 (loader): remote cmd from 1428: "status" 20:22:23.612 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:23.612 (reboot 4): status read, retry 34 20:22:23.732 (loader): remote cmd from 1428: "status" 20:22:23.734 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:23.734 (reboot 4): status read, retry 35 20:22:23.848 (loader): remote cmd from 1428: "status" 20:22:23.850 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:23.850 (reboot 4): status read, retry 36 20:22:23.963 (loader): remote cmd from 1428: "status" 20:22:23.965 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:23.965 (reboot 4): status read, retry 37 20:22:24.079 (loader): remote cmd from 1428: "status" 20:22:24.081 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:24.081 (reboot 4): status read, retry 38 20:22:24.195 (loader): remote cmd from 1428: "status" 20:22:24.197 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:24.197 (reboot 4): status read, retry 39 20:22:24.310 (loader): remote cmd from 1428: "status" 20:22:24.312 (reboot 4): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:22:24.312 (reboot 4): status read, retry 40 20:22:24.432 (reboot 4): Disconnect 20:22:24.448 (loader): remote connection 1428 closed 20:22:24.448 (loader): remote connection 1424 closed 20:22:31.432 (loader): remote connection 1496 opened 20:22:31.434 (ports 5): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:22:31.438 (ports 5): remove: loc=usb:0/140000/0/8/7 20:22:31.438 (ports 5): usb_remove: usb:0/140000/0/8/7 20:22:31.438 (ports 5): nothing new, skipping HID & Ports enum 20:22:31.453 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:22:31.454 (ports 5): nothing new, skipping HID & Ports enum 20:22:31.459 (ports 5): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:22:31.460 (ports 5): nothing new, skipping HID & Ports enum 20:22:33.147 (ports 5): purge, name=COM19 (Teensy 3.2) Serial, loc=usb:0/140000/0/8/7, age=1.709 sec 20:22:40.684 (ports 5): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:22:40.685 (ports 5): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#863660#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:22:40.685 (ports 5): found_usb_device, loc=usb:0/140000/0/8/2 Port_#0002.Hub_#0003 20:22:40.685 (ports 5): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0275 20:22:40.685 (ports 5): found_usb_device, devinst=0000001e 20:22:40.685 (ports 5): add: loc=usb:0/140000/0/8/2, class=Ports, vid=16C0, pid=0483, ver=0275, serial=863660, dev=\\?\usb#vid_16c0&pid_0483#863660#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:22:40.685 (ports 5): comport_from_devinst_list attempt 20:22:40.685 (ports 5): found Ports in classguid_list at index=0 20:22:40.686 (ports 5): port COM19 found from devnode 20:22:40.686 (ports 5): found_usb_device complete 20:22:40.687 (ports 5): usb_add: usb:0/140000/0/8/2 COM19 (Teensy 3.2) Serial 20:22:40.687 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:22:40.688 (ports 5): nothing new, skipping HID & Ports enum 20:22:40.697 (ports 5): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:22:40.698 (ports 5): nothing new, skipping HID & Ports enum 20:22:40.728 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:22:40.729 (ports 5): nothing new, skipping HID & Ports enum 20:23:19.539 (loader): Verbose Info event 20:23:46.749 (ports 5): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:23:46.750 (ports 5): remove: loc=usb:0/140000/0/8/2 20:23:46.750 (ports 5): usb_remove: usb:0/140000/0/8/2 20:23:46.750 (ports 5): remove: loc=usb:0/140000/0/8/3 20:23:46.750 (ports 5): usb_remove: usb:0/140000/0/8/3 20:23:46.750 (ports 5): nothing new, skipping HID & Ports enum 20:23:46.750 (ports 5): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:23:46.751 (ports 5): nothing new, skipping HID & Ports enum 20:23:46.844 (ports 5): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:23:46.844 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:23:46.845 (ports 5): nothing new, skipping HID & Ports enum 20:23:46.892 (ports 5): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:23:46.892 (ports 5): nothing new, skipping HID & Ports enum 20:23:47.051 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:23:47.052 (ports 5): nothing new, skipping HID & Ports enum 20:23:48.397 (ports 5): purge, name=COM13 (Teensy 3.2) Serial, loc=usb:0/140000/0/8/3, age=1.647 sec 20:23:48.397 (ports 5): purge, name=COM19 (Teensy 3.2) Serial, loc=usb:0/140000/0/8/2, age=1.647 sec 20:23:54.217 (ports 5): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:23:54.218 (ports 5): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1000020#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:23:54.218 (ports 5): found_usb_device, loc=usb:0/140000/0/8/6 Port_#0006.Hub_#0003 20:23:54.218 (ports 5): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0278 20:23:54.218 (ports 5): found_usb_device, devinst=0000001f 20:23:54.218 (ports 5): add: loc=usb:0/140000/0/8/6, class=Ports, vid=16C0, pid=0483, ver=0278, serial=1000020, dev=\\?\usb#vid_16c0&pid_0483#1000020#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:23:54.218 (ports 5): comport_from_devinst_list attempt 20:23:54.218 (ports 5): found Ports in classguid_list at index=0 20:23:54.218 (ports 5): port COM20 found from devnode 20:23:54.218 (ports 5): found_usb_device complete 20:23:54.219 (ports 5): usb_add: usb:0/140000/0/8/6 COM20 (Teensy 4-Beta) Serial 20:23:54.326 (ports 5): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:23:54.326 (ports 5): nothing new, skipping HID & Ports enum 20:23:54.327 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:23:54.327 (ports 5): nothing new, skipping HID & Ports enum 20:24:20.150 (loader): file changed 20:24:20.165 (loader): File "ssd1306_FlexIO_128x32_spi_muilti.ino.hex". 54316 bytes, 3% used 20:24:20.357 (post_compile 6): Begin, version=1.46-beta8, high-res time 20:24:23.365 (loader): remote connection 1660 opened 20:24:23.365 (loader): remote cmd from 1660: "comment: Teensyduino 1.46-beta8 - WINDOWS (teensy_post_compile)" 20:24:23.365 (loader): remote cmd from 1660: "status" 20:24:23.372 (post_compile 6): Sending command: comment: Teensyduino 1.46-beta8 - WINDOWS (teensy_post_compile) 20:24:23.387 (loader): remote cmd from 1660: "dir:T:\TEMP\arduino_build_10720\" 20:24:23.387 (loader): remote cmd from 1660: "file:ssd1306_FlexIO_128x32_spi_muilti.ino.hex" 20:24:23.387 (post_compile 6): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:24:23.387 (post_compile 6): Sending command: dir:T:\TEMP\arduino_build_10720\ 20:24:23.393 (post_compile 6): Sending command: file:ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:24:23.404 (loader): File "ssd1306_FlexIO_128x32_spi_muilti.ino.hex". 54316 bytes, 3% used 20:24:23.404 (loader): remote cmd from 1660: "status" 20:24:23.425 (post_compile 6): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:24:23.425 (post_compile 6): Disconnect 20:24:23.444 (loader): remote connection 1660 closed 20:24:23.782 (loader): remote connection 1660 opened 20:24:23.790 (post_compile 7): Begin, version=1.46-beta8, high-res time 20:24:23.797 (loader): remote cmd from 1660: "comment: Teensyduino 1.46-beta8 - WINDOWS (teensy_post_compile)" 20:24:23.800 (post_compile 7): Sending command: comment: Teensyduino 1.46-beta8 - WINDOWS (teensy_post_compile) 20:24:23.803 (loader): remote cmd from 1660: "status" 20:24:23.803 (loader): remote cmd from 1660: "dir:T:\TEMP\arduino_build_10720\" 20:24:23.814 (post_compile 7): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:24:23.814 (post_compile 7): Sending command: dir:T:\TEMP\arduino_build_10720\ 20:24:23.820 (loader): remote cmd from 1660: "file:ssd1306_FlexIO_128x32_spi_muilti.ino.hex" 20:24:23.821 (post_compile 7): Sending command: file:ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:24:23.836 (loader): File "ssd1306_FlexIO_128x32_spi_muilti.ino.hex". 54316 bytes, 3% used 20:24:23.838 (loader): remote cmd from 1660: "status" 20:24:23.855 (post_compile 7): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:24:23.855 (post_compile 7): Disconnect 20:24:23.870 (post_compile 8): Running teensy_reboot: "T:\arduino-1.8.8T4_146\hardware\teensy\..\tools\teensy_reboot.exe" teensy_reboot.exe "-board=TEENSY40" "-port=usb:0/140000/0/8/6" "-portlabel=COM20 (Teensy 4-Beta) Serial" "-portprotocol=Teensy" 20:24:23.870 (loader): remote connection 1660 closed 20:24:23.870 (loader): remote connection 1660 opened 20:24:23.921 (loader): remote connection 1668 opened 20:24:23.921 (reboot 9): Begin, version=1.46-beta8, high-res time 20:24:23.921 (loader): remote cmd from 1668: "show:arduino_attempt_reboot" 20:24:23.921 (reboot 9): location = usb:0/140000/0/8/6 20:24:23.921 (reboot 9): portlabel = COM20 (Teensy 4-Beta) Serial 20:24:23.921 (reboot 9): portprotocol = Teensy 20:24:23.921 (reboot 9): Only location usb:0/140000/0/8/6 will be tried 20:24:23.921 (reboot 9): LoadLibrary cfgmgr32 ok 20:24:23.921 (reboot 9): LoadLibrary ntdll ok 20:24:23.923 (reboot 9): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1000020#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:24:23.923 (reboot 9): found_usb_device, loc=usb:0/140000/0/8/6 Port_#0006.Hub_#0003 20:24:23.923 (reboot 9): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0278 20:24:23.923 (reboot 9): found_usb_device, devinst=00000005 20:24:23.924 (reboot 9): add: loc=usb:0/140000/0/8/6, class=Ports, vid=16C0, pid=0483, ver=0278, serial=1000020, dev=\\?\usb#vid_16c0&pid_0483#1000020#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:24:23.924 (reboot 9): comport_from_devinst_list attempt 20:24:23.924 (reboot 9): found Ports in classguid_list at index=0 20:24:23.924 (reboot 9): port COM20 found from devnode 20:24:23.924 (reboot 9): found_usb_device complete 20:24:23.935 (reboot 9): found Teensy Loader, version 1.46 20:24:23.935 (reboot 9): Sending command: show:arduino_attempt_reboot 20:24:23.938 (loader): got request to show arduino rebooting message 20:24:23.938 (loader): remote cmd from 1668: "comment: Teensyduino 1.46-beta8 - WINDOWS (teensy_reboot)" 20:24:23.949 (reboot 9): Sending command: comment: Teensyduino 1.46-beta8 - WINDOWS (teensy_reboot) 20:24:23.954 (loader): remote cmd from 1668: "status" 20:24:23.963 (reboot 9): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:24:23.963 (reboot 9): do_reset (serial) COM20 20:24:23.970 (loader): remote cmd from 1668: "status" 20:24:23.991 (reboot 9): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:24:23.991 (reboot 9): status read, retry 0 20:24:24.063 (ports 5): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:24:24.064 (ports 5): remove: loc=usb:0/140000/0/8/6 20:24:24.064 (ports 5): usb_remove: usb:0/140000/0/8/6 20:24:24.064 (ports 5): nothing new, skipping HID & Ports enum 20:24:24.102 (loader): remote cmd from 1668: "status" 20:24:24.117 (reboot 9): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:24:24.117 (reboot 9): status read, retry 1 20:24:24.120 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:24:24.121 (ports 5): nothing new, skipping HID & Ports enum 20:24:24.121 (ports 5): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:24:24.122 (ports 5): nothing new, skipping HID & Ports enum 20:24:24.221 (loader): remote cmd from 1668: "status" 20:24:24.230 (reboot 9): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:24:24.230 (reboot 9): status read, retry 2 20:24:24.341 (loader): remote cmd from 1668: "status" 20:24:24.349 (reboot 9): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:24:24.349 (reboot 9): status read, retry 3 20:24:24.461 (loader): remote cmd from 1668: "status" 20:24:24.470 (reboot 9): Status: 1, 1, 0, 0, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:24:24.470 (reboot 9): status read, retry 4 20:24:24.581 (loader): remote cmd from 1668: "status" 20:24:24.583 (ports 5): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:24:24.584 (ports 5): found_usb_device, id=\\?\usb#vid_16c0&pid_0478#000186a2#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:24:24.584 (ports 5): found_usb_device, loc=usb:0/140000/0/8/6 Port_#0006.Hub_#0003 20:24:24.584 (ports 5): found_usb_device, hwid=USB\VID_16C0&PID_0478&REV_0002 20:24:24.584 (ports 5): found_usb_device, devinst=00000020 20:24:24.584 (ports 5): add: loc=usb:0/140000/0/8/6, class=HID, vid=16C0, pid=0478, ver=0002, serial=000186a2, dev=\\?\usb#vid_16c0&pid_0478#000186a2#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:24:24.584 (ports 5): hiddev_from_devinst_list: iface=0 20:24:24.586 (ports 5): found_usb_device complete 20:24:24.587 (ports 5): hid, found devinst=00000021 20:24:24.587 (ports 5): hid, path=\\?\hid#vid_16c0&pid_0478#6&a69549&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 20:24:24.587 (ports 5): hid, opened handle 20:24:24.587 (ports 5): devinst=00000021, location=usb:0/140000/0/8/6 20:24:24.587 (ports 5): vid=16C0, pid=0478, ver=0002, usepage=FF9C, use=0023 20:24:24.587 (ports 5): devpath=\\?\hid#vid_16c0&pid_0478#6&a69549&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 20:24:24.596 (loader): Device came online, code_size = 1572864 20:24:24.598 (ports 5): usb_add: usb:0/140000/0/8/6 hid#vid_16c0&pid_0478 (Teensy 4-Beta) Bootloader 20:24:24.611 (loader): Board is: Teensy 4-Beta1 (IMXRT1052), version 0.02 20:24:24.631 (loader): File "ssd1306_FlexIO_128x32_spi_muilti.ino.hex". 54316 bytes, 3% used 20:24:24.641 (loader): set background IMG_ONLINE 20:24:24.671 (loader): File "ssd1306_FlexIO_128x32_spi_muilti.ino.hex". 54316 bytes, 3% used 20:24:24.681 (loader): elf size appears to be 1572864 20:24:24.691 (loader): elf binary data matches hex file 20:24:24.704 (loader): Code size from .elf file = 1572864 20:24:24.722 (loader): begin operation 20:24:24.746 (reboot 9): Status: 1, 1, 1, 1, 0, 1, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:24:24.796 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:24:24.802 (ports 5): nothing new, skipping HID & Ports enum 20:24:24.822 (loader): remote cmd from 1668: "status" 20:24:24.850 (reboot 9): Status: 1, 1, 1, 1, 0, 1, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:24:24.851 (loader): flash, block=0, bs=1024, auto=1 20:24:24.854 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:24:24.861 (ports 5): nothing new, skipping HID & Ports enum 20:24:24.861 (loader): gauge old value = 0 20:24:24.911 (loader): remote cmd from 1668: "status" 20:24:24.926 (loader): flash, block=1, bs=1024, auto=1 20:24:24.930 (reboot 9): Status: 1, 1, 1, 1, 0, 1, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:24:25.031 (loader): gauge old value = 1 20:24:25.055 (loader): remote cmd from 1668: "status" 20:24:25.061 (loader): flash, block=2, bs=1024, auto=1 20:24:25.068 (reboot 9): Status: 1, 1, 1, 1, 0, 1, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:24:25.231 (loader): gauge old value = 2 20:24:25.241 (loader): remote cmd from 1668: "status" 20:24:25.251 (loader): flash, block=3, bs=1024, auto=1 20:24:25.253 (reboot 9): Status: 1, 1, 1, 1, 0, 1, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:24:25.261 (loader): gauge old value = 3 20:24:25.271 (loader): flash, block=4, bs=1024, auto=1 20:24:25.281 (loader): gauge old value = 4 20:24:25.291 (loader): flash, block=5, bs=1024, auto=1 20:24:25.304 (loader): gauge old value = 5 20:24:25.310 (loader): flash, block=6, bs=1024, auto=1 20:24:25.321 (loader): gauge old value = 6 20:24:25.339 (loader): flash, block=7, bs=1024, auto=1 20:24:25.351 (loader): gauge old value = 7 20:24:25.361 (loader): flash, block=8, bs=1024, auto=1 20:24:25.371 (loader): gauge old value = 8 20:24:25.381 (loader): flash, block=9, bs=1024, auto=1 20:24:25.391 (loader): gauge old value = 9 20:24:25.406 (loader): flash, block=10, bs=1024, auto=1 20:24:25.411 (loader): gauge old value = 10 20:24:25.422 (loader): remote cmd from 1668: "status" 20:24:25.431 (loader): flash, block=11, bs=1024, auto=1 20:24:25.436 (reboot 9): Status: 1, 1, 1, 1, 0, 1, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:24:25.446 (loader): gauge old value = 11 20:24:25.455 (loader): flash, block=12, bs=1024, auto=1 20:24:25.461 (loader): gauge old value = 12 20:24:25.472 (loader): flash, block=13, bs=1024, auto=1 20:24:25.481 (loader): gauge old value = 13 20:24:25.487 (reboot 9): status read, retry 5 20:24:25.487 (reboot 9): Disconnect 20:24:25.487 (reboot 9): Success 20:24:25.491 (loader): flash, block=14, bs=1024, auto=1 20:24:25.501 (loader): gauge old value = 14 20:24:25.511 (loader): remote connection 1668 closed 20:24:25.511 (loader): remote connection 1660 closed 20:24:25.561 (loader): flash, block=15, bs=1024, auto=1 20:24:25.571 (loader): gauge old value = 15 20:24:25.581 (loader): flash, block=16, bs=1024, auto=1 20:24:25.591 (loader): gauge old value = 16 20:24:25.605 (loader): flash, block=17, bs=1024, auto=1 20:24:25.611 (loader): gauge old value = 17 20:24:25.631 (loader): flash, block=18, bs=1024, auto=1 20:24:25.651 (loader): gauge old value = 18 20:24:25.666 (loader): flash, block=19, bs=1024, auto=1 20:24:25.681 (loader): gauge old value = 19 20:24:25.693 (loader): flash, block=20, bs=1024, auto=1 20:24:25.701 (loader): gauge old value = 20 20:24:25.711 (loader): flash, block=21, bs=1024, auto=1 20:24:25.731 (loader): gauge old value = 21 20:24:25.741 (loader): flash, block=22, bs=1024, auto=1 20:24:25.756 (loader): gauge old value = 22 20:24:25.761 (loader): flash, block=23, bs=1024, auto=1 20:24:25.781 (loader): gauge old value = 23 20:24:25.791 (loader): flash, block=24, bs=1024, auto=1 20:24:25.806 (loader): gauge old value = 24 20:24:25.811 (loader): flash, block=25, bs=1024, auto=1 20:24:25.821 (loader): gauge old value = 25 20:24:25.831 (loader): flash, block=26, bs=1024, auto=1 20:24:25.841 (loader): gauge old value = 26 20:24:25.841 (loader): flash, block=27, bs=1024, auto=1 20:24:25.854 (loader): gauge old value = 27 20:24:25.861 (loader): flash, block=28, bs=1024, auto=1 20:24:25.866 (loader): gauge old value = 28 20:24:25.871 (loader): flash, block=29, bs=1024, auto=1 20:24:25.881 (loader): gauge old value = 29 20:24:25.887 (loader): flash, block=30, bs=1024, auto=1 20:24:25.891 (loader): gauge old value = 30 20:24:25.891 (loader): flash, block=31, bs=1024, auto=1 20:24:25.905 (loader): gauge old value = 31 20:24:25.911 (loader): flash, block=32, bs=1024, auto=1 20:24:25.921 (loader): gauge old value = 32 20:24:25.921 (loader): flash, block=33, bs=1024, auto=1 20:24:25.931 (loader): gauge old value = 33 20:24:25.938 (loader): flash, block=34, bs=1024, auto=1 20:24:25.941 (loader): gauge old value = 34 20:24:25.951 (loader): flash, block=35, bs=1024, auto=1 20:24:25.955 (loader): gauge old value = 35 20:24:25.961 (loader): flash, block=36, bs=1024, auto=1 20:24:25.966 (loader): gauge old value = 36 20:24:25.976 (loader): flash, block=37, bs=1024, auto=1 20:24:25.981 (loader): gauge old value = 37 20:24:25.988 (loader): flash, block=38, bs=1024, auto=1 20:24:25.991 (loader): gauge old value = 38 20:24:25.991 (loader): flash, block=39, bs=1024, auto=1 20:24:26.003 (loader): gauge old value = 39 20:24:26.003 (loader): flash, block=40, bs=1024, auto=1 20:24:26.011 (loader): gauge old value = 40 20:24:26.021 (loader): flash, block=41, bs=1024, auto=1 20:24:26.021 (loader): gauge old value = 41 20:24:26.031 (loader): flash, block=42, bs=1024, auto=1 20:24:26.038 (loader): gauge old value = 42 20:24:26.041 (loader): flash, block=43, bs=1024, auto=1 20:24:26.046 (loader): gauge old value = 43 20:24:26.053 (loader): flash, block=44, bs=1024, auto=1 20:24:26.053 (loader): gauge old value = 44 20:24:26.061 (loader): flash, block=45, bs=1024, auto=1 20:24:26.071 (loader): gauge old value = 45 20:24:26.071 (loader): flash, block=46, bs=1024, auto=1 20:24:26.081 (loader): gauge old value = 46 20:24:26.088 (loader): flash, block=47, bs=1024, auto=1 20:24:26.091 (loader): gauge old value = 47 20:24:26.096 (loader): flash, block=48, bs=1024, auto=1 20:24:26.104 (loader): gauge old value = 48 20:24:26.111 (loader): flash, block=49, bs=1024, auto=1 20:24:26.116 (loader): gauge old value = 49 20:24:26.121 (loader): flash, block=50, bs=1024, auto=1 20:24:26.121 (loader): gauge old value = 50 20:24:26.131 (loader): flash, block=51, bs=1024, auto=1 20:24:26.138 (loader): gauge old value = 51 20:24:26.142 (loader): flash, block=52, bs=1024, auto=1 20:24:26.146 (loader): gauge old value = 52 20:24:26.154 (loader): flash, block=53, bs=1024, auto=1 20:24:26.161 (loader): gauge old value = 53 20:24:26.166 (loader): sending reboot 20:24:26.176 (loader): begin wait_until_offline 20:24:26.181 (loader): offline, waited 0 20:24:26.182 (ports 5): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:24:26.183 (ports 5): remove: loc=usb:0/140000/0/8/6 20:24:26.183 (ports 5): usb_remove: usb:0/140000/0/8/6 20:24:26.183 (ports 5): nothing new, skipping HID & Ports enum 20:24:26.191 (loader): end operation, total time = 1.460 seconds 20:24:26.191 (loader): set background IMG_REBOOT_OK 20:24:26.205 (loader): redraw timer set, image 14 to show for 1200 ms 20:24:26.241 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:24:26.251 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:24:26.257 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:24:26.261 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:24:26.261 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:24:26.276 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:24:26.281 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:24:26.291 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:24:26.291 (loader): HID/win32: vid:051D pid:0002 ver:0106 20:24:26.305 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:24:26.305 (ports 5): nothing new, skipping HID & Ports enum 20:24:26.537 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:24:26.537 (ports 5): nothing new, skipping HID & Ports enum 20:24:26.545 (ports 5): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:24:26.546 (ports 5): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1000020#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:24:26.546 (ports 5): found_usb_device, loc=usb:0/140000/0/8/6 Port_#0006.Hub_#0003 20:24:26.546 (ports 5): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0278 20:24:26.546 (ports 5): found_usb_device, devinst=0000001f 20:24:26.546 (ports 5): add: loc=usb:0/140000/0/8/6, class=Ports, vid=16C0, pid=0483, ver=0278, serial=1000020, dev=\\?\usb#vid_16c0&pid_0483#1000020#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:24:26.546 (ports 5): comport_from_devinst_list attempt 20:24:26.546 (ports 5): found Ports in classguid_list at index=0 20:24:26.546 (ports 5): port COM20 found from devnode 20:24:26.546 (ports 5): found_usb_device complete 20:24:26.547 (ports 5): usb_add: usb:0/140000/0/8/6 COM20 (Teensy 4-Beta) Serial 20:24:26.651 (ports 5): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:24:26.652 (ports 5): nothing new, skipping HID & Ports enum 20:24:26.652 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:24:26.653 (ports 5): nothing new, skipping HID & Ports enum 20:24:27.421 (loader): redraw, image 9 20:26:05.799 (loader): file changed 20:26:05.816 (loader): File "ssd1306_FlexIO_128x32_spi_muilti.ino.hex". 54316 bytes, 3% used 20:26:05.920 (post_compile 10): Begin, version=1.46-beta8, high-res time 20:26:08.929 (loader): remote connection 1716 opened 20:26:08.935 (loader): remote cmd from 1716: "comment: Teensyduino 1.46-beta8 - WINDOWS (teensy_post_compile)" 20:26:08.935 (loader): remote cmd from 1716: "status" 20:26:08.935 (loader): remote cmd from 1716: "dir:T:\TEMP\arduino_build_10720\" 20:26:08.936 (post_compile 10): Sending command: comment: Teensyduino 1.46-beta8 - WINDOWS (teensy_post_compile) 20:26:08.949 (post_compile 10): Status: 1, 1, 0, 1, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:26:08.949 (post_compile 10): Sending command: dir:T:\TEMP\arduino_build_10720\ 20:26:08.950 (loader): remote cmd from 1716: "file:ssd1306_FlexIO_128x32_spi_muilti.ino.hex" 20:26:08.955 (post_compile 10): Sending command: file:ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:26:08.966 (loader): File "ssd1306_FlexIO_128x32_spi_muilti.ino.hex". 54316 bytes, 3% used 20:26:08.972 (loader): remote cmd from 1716: "status" 20:26:08.986 (post_compile 10): Status: 1, 1, 0, 1, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:26:08.986 (post_compile 10): Disconnect 20:26:09.011 (loader): remote connection 1716 closed 20:26:09.352 (loader): remote connection 1716 opened 20:26:09.362 (post_compile 11): Begin, version=1.46-beta8, high-res time 20:26:09.367 (loader): remote cmd from 1716: "comment: Teensyduino 1.46-beta8 - WINDOWS (teensy_post_compile)" 20:26:09.367 (loader): remote cmd from 1716: "status" 20:26:09.373 (post_compile 11): Sending command: comment: Teensyduino 1.46-beta8 - WINDOWS (teensy_post_compile) 20:26:09.383 (loader): remote cmd from 1716: "dir:T:\TEMP\arduino_build_10720\" 20:26:09.387 (post_compile 11): Status: 1, 1, 0, 1, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:26:09.387 (post_compile 11): Sending command: dir:T:\TEMP\arduino_build_10720\ 20:26:09.391 (loader): remote cmd from 1716: "file:ssd1306_FlexIO_128x32_spi_muilti.ino.hex" 20:26:09.393 (post_compile 11): Sending command: file:ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:26:09.405 (loader): File "ssd1306_FlexIO_128x32_spi_muilti.ino.hex". 54316 bytes, 3% used 20:26:09.405 (loader): remote cmd from 1716: "status" 20:26:09.424 (post_compile 11): Status: 1, 1, 0, 1, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:26:09.424 (post_compile 11): Disconnect 20:26:09.438 (post_compile 12): Running teensy_reboot: "T:\arduino-1.8.8T4_146\hardware\teensy\..\tools\teensy_reboot.exe" teensy_reboot.exe "-board=TEENSY40" "-port=usb:0/140000/0/8/6" "-portlabel=hid#vid_16c0&pid_0478 (Teensy 4-Beta) Bootloader" "-portprotocol=Teensy" 20:26:09.439 (loader): remote connection 1716 closed 20:26:09.456 (loader): remote connection 1716 opened 20:26:09.489 (loader): remote connection 1700 opened 20:26:09.492 (reboot 13): Begin, version=1.46-beta8, high-res time 20:26:09.492 (reboot 13): location = usb:0/140000/0/8/6 20:26:09.492 (reboot 13): portlabel = hid#vid_16c0&pid_0478 (Teensy 4-Beta) Bootloader 20:26:09.492 (reboot 13): portprotocol = Teensy 20:26:09.492 (reboot 13): Only location usb:0/140000/0/8/6 will be tried 20:26:09.492 (reboot 13): LoadLibrary cfgmgr32 ok 20:26:09.492 (reboot 13): LoadLibrary ntdll ok 20:26:09.494 (reboot 13): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1000020#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:26:09.494 (reboot 13): found_usb_device, loc=usb:0/140000/0/8/6 Port_#0006.Hub_#0003 20:26:09.494 (reboot 13): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0278 20:26:09.494 (reboot 13): found_usb_device, devinst=00000005 20:26:09.494 (reboot 13): add: loc=usb:0/140000/0/8/6, class=Ports, vid=16C0, pid=0483, ver=0278, serial=1000020, dev=\\?\usb#vid_16c0&pid_0483#1000020#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:26:09.494 (reboot 13): comport_from_devinst_list attempt 20:26:09.494 (reboot 13): found Ports in classguid_list at index=0 20:26:09.494 (reboot 13): port COM20 found from devnode 20:26:09.494 (reboot 13): found_usb_device complete 20:26:09.505 (loader): remote cmd from 1700: "show:arduino_attempt_reboot" 20:26:09.505 (reboot 13): found Teensy Loader, version 1.46 20:26:09.505 (reboot 13): Sending command: show:arduino_attempt_reboot 20:26:09.506 (loader): got request to show arduino rebooting message 20:26:09.506 (loader): remote cmd from 1700: "comment: Teensyduino 1.46-beta8 - WINDOWS (teensy_reboot)" 20:26:09.519 (reboot 13): Sending command: comment: Teensyduino 1.46-beta8 - WINDOWS (teensy_reboot) 20:26:09.522 (loader): remote cmd from 1700: "status" 20:26:09.533 (reboot 13): Status: 1, 1, 0, 1, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:26:09.533 (reboot 13): do_reset (serial) COM20 20:26:09.539 (loader): remote cmd from 1700: "status" 20:26:09.560 (reboot 13): Status: 1, 1, 0, 1, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:26:09.560 (reboot 13): status read, retry 0 20:26:09.610 (ports 5): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:26:09.611 (ports 5): remove: loc=usb:0/140000/0/8/6 20:26:09.611 (ports 5): usb_remove: usb:0/140000/0/8/6 20:26:09.611 (ports 5): nothing new, skipping HID & Ports enum 20:26:09.662 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:26:09.662 (ports 5): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:26:09.663 (ports 5): nothing new, skipping HID & Ports enum 20:26:09.690 (loader): remote cmd from 1700: "status" 20:26:09.721 (reboot 13): Status: 1, 1, 0, 1, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:26:09.721 (reboot 13): status read, retry 1 20:26:09.830 (loader): remote cmd from 1700: "status" 20:26:09.841 (reboot 13): Status: 1, 1, 0, 1, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:26:09.841 (reboot 13): status read, retry 2 20:26:09.956 (loader): remote cmd from 1700: "status" 20:26:09.964 (reboot 13): Status: 1, 1, 0, 1, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:26:09.964 (reboot 13): status read, retry 3 20:26:10.070 (loader): remote cmd from 1700: "status" 20:26:10.082 (reboot 13): Status: 1, 1, 0, 1, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:26:10.082 (reboot 13): status read, retry 4 20:26:10.135 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:26:10.136 (ports 5): nothing new, skipping HID & Ports enum 20:26:10.138 (ports 5): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:26:10.139 (ports 5): found_usb_device, id=\\?\usb#vid_16c0&pid_0478#000186a2#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:26:10.139 (ports 5): found_usb_device, loc=usb:0/140000/0/8/6 Port_#0006.Hub_#0003 20:26:10.139 (ports 5): found_usb_device, hwid=USB\VID_16C0&PID_0478&REV_0002 20:26:10.139 (ports 5): found_usb_device, devinst=00000020 20:26:10.139 (ports 5): add: loc=usb:0/140000/0/8/6, class=HID, vid=16C0, pid=0478, ver=0002, serial=000186a2, dev=\\?\usb#vid_16c0&pid_0478#000186a2#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:26:10.139 (ports 5): hiddev_from_devinst_list: iface=0 20:26:10.140 (ports 5): found_usb_device complete 20:26:10.141 (ports 5): hid, found devinst=00000021 20:26:10.141 (ports 5): hid, path=\\?\hid#vid_16c0&pid_0478#6&a69549&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 20:26:10.141 (ports 5): hid, opened handle 20:26:10.141 (ports 5): devinst=00000021, location=usb:0/140000/0/8/6 20:26:10.141 (ports 5): vid=16C0, pid=0478, ver=0002, usepage=FF9C, use=0023 20:26:10.141 (ports 5): devpath=\\?\hid#vid_16c0&pid_0478#6&a69549&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 20:26:10.141 (ports 5): usb_add: usb:0/140000/0/8/6 hid#vid_16c0&pid_0478 (Teensy 4-Beta) Bootloader 20:26:10.360 (loader): remote cmd from 1700: "status" 20:26:10.391 (loader): Device came online, code_size = 1572864 20:26:10.400 (loader): Board is: Teensy 4-Beta1 (IMXRT1052), version 0.02 20:26:10.430 (loader): File "ssd1306_FlexIO_128x32_spi_muilti.ino.hex". 54316 bytes, 3% used 20:26:10.439 (loader): set background IMG_ONLINE 20:26:10.473 (loader): File "ssd1306_FlexIO_128x32_spi_muilti.ino.hex". 54316 bytes, 3% used 20:26:10.480 (loader): elf size appears to be 1572864 20:26:10.500 (loader): elf binary data matches hex file 20:26:10.510 (loader): Code size from .elf file = 1572864 20:26:10.523 (loader): begin operation 20:26:10.553 (reboot 13): Status: 1, 1, 1, 2, 0, 1, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:26:10.558 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:26:10.559 (ports 5): nothing new, skipping HID & Ports enum 20:26:10.610 (loader): remote cmd from 1700: "status" 20:26:10.624 (reboot 13): Status: 1, 1, 1, 2, 0, 1, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:26:10.625 (loader): flash, block=0, bs=1024, auto=1 20:26:10.640 (loader): gauge old value = 0 20:26:10.655 (loader): flash, block=1, bs=1024, auto=1 20:26:10.810 (loader): gauge old value = 1 20:26:10.823 (loader): remote cmd from 1700: "status" 20:26:10.835 (loader): flash, block=2, bs=1024, auto=1 20:26:10.838 (reboot 13): Status: 1, 1, 1, 2, 0, 1, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:26:11.010 (loader): gauge old value = 2 20:26:11.040 (loader): flash, block=3, bs=1024, auto=1 20:26:11.056 (loader): gauge old value = 3 20:26:11.060 (loader): remote cmd from 1700: "status" 20:26:11.073 (loader): flash, block=4, bs=1024, auto=1 20:26:11.077 (reboot 13): Status: 1, 1, 1, 2, 0, 1, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:26:11.080 (loader): gauge old value = 4 20:26:11.090 (loader): flash, block=5, bs=1024, auto=1 20:26:11.106 (loader): gauge old value = 5 20:26:11.120 (loader): flash, block=6, bs=1024, auto=1 20:26:11.130 (loader): gauge old value = 6 20:26:11.145 (loader): flash, block=7, bs=1024, auto=1 20:26:11.155 (loader): gauge old value = 7 20:26:11.165 (loader): flash, block=8, bs=1024, auto=1 20:26:11.180 (loader): gauge old value = 8 20:26:11.195 (loader): flash, block=9, bs=1024, auto=1 20:26:11.205 (loader): gauge old value = 9 20:26:11.213 (loader): flash, block=10, bs=1024, auto=1 20:26:11.225 (loader): gauge old value = 10 20:26:11.235 (loader): flash, block=11, bs=1024, auto=1 20:26:11.243 (loader): gauge old value = 11 20:26:11.260 (loader): flash, block=12, bs=1024, auto=1 20:26:11.270 (loader): gauge old value = 12 20:26:11.280 (loader): flash, block=13, bs=1024, auto=1 20:26:11.280 (loader): gauge old value = 13 20:26:11.296 (loader): flash, block=14, bs=1024, auto=1 20:26:11.300 (loader): gauge old value = 14 20:26:11.310 (loader): remote cmd from 1700: "status" 20:26:11.320 (loader): flash, block=15, bs=1024, auto=1 20:26:11.324 (reboot 13): Status: 1, 1, 1, 2, 0, 1, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:26:11.330 (loader): gauge old value = 15 20:26:11.330 (loader): flash, block=16, bs=1024, auto=1 20:26:11.345 (loader): gauge old value = 16 20:26:11.350 (loader): flash, block=17, bs=1024, auto=1 20:26:11.360 (loader): gauge old value = 17 20:26:11.360 (loader): flash, block=18, bs=1024, auto=1 20:26:11.374 (loader): gauge old value = 18 20:26:11.380 (loader): flash, block=19, bs=1024, auto=1 20:26:11.392 (loader): gauge old value = 19 20:26:11.400 (loader): flash, block=20, bs=1024, auto=1 20:26:11.410 (loader): gauge old value = 20 20:26:11.420 (loader): flash, block=21, bs=1024, auto=1 20:26:11.424 (loader): gauge old value = 21 20:26:11.430 (loader): flash, block=22, bs=1024, auto=1 20:26:11.440 (loader): gauge old value = 22 20:26:11.450 (loader): flash, block=23, bs=1024, auto=1 20:26:11.460 (loader): gauge old value = 23 20:26:11.460 (loader): flash, block=24, bs=1024, auto=1 20:26:11.473 (loader): gauge old value = 24 20:26:11.480 (loader): flash, block=25, bs=1024, auto=1 20:26:11.480 (loader): gauge old value = 25 20:26:11.490 (loader): flash, block=26, bs=1024, auto=1 20:26:11.500 (loader): gauge old value = 26 20:26:11.505 (loader): flash, block=27, bs=1024, auto=1 20:26:11.510 (loader): gauge old value = 27 20:26:11.510 (loader): flash, block=28, bs=1024, auto=1 20:26:11.522 (loader): gauge old value = 28 20:26:11.522 (loader): flash, block=29, bs=1024, auto=1 20:26:11.530 (loader): gauge old value = 29 20:26:11.540 (loader): flash, block=30, bs=1024, auto=1 20:26:11.540 (loader): gauge old value = 30 20:26:11.550 (loader): flash, block=31, bs=1024, auto=1 20:26:11.557 (loader): gauge old value = 31 20:26:11.560 (loader): remote cmd from 1700: "status" 20:26:11.560 (loader): flash, block=32, bs=1024, auto=1 20:26:11.569 (reboot 13): Status: 1, 1, 1, 2, 0, 1, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:26:11.573 (loader): gauge old value = 32 20:26:11.580 (loader): flash, block=33, bs=1024, auto=1 20:26:11.585 (loader): gauge old value = 33 20:26:11.590 (loader): flash, block=34, bs=1024, auto=1 20:26:11.590 (loader): gauge old value = 34 20:26:11.600 (loader): flash, block=35, bs=1024, auto=1 20:26:11.607 (loader): gauge old value = 35 20:26:11.610 (loader): flash, block=36, bs=1024, auto=1 20:26:11.610 (loader): gauge old value = 36 20:26:11.622 (reboot 13): status read, retry 5 20:26:11.622 (reboot 13): Success 20:26:11.622 (reboot 13): Disconnect 20:26:11.658 (loader): remote connection 1700 closed 20:26:11.665 (loader): remote connection 1716 closed 20:26:11.675 (loader): flash, block=37, bs=1024, auto=1 20:26:11.680 (loader): gauge old value = 37 20:26:11.691 (loader): flash, block=38, bs=1024, auto=1 20:26:11.695 (loader): gauge old value = 38 20:26:11.700 (loader): flash, block=39, bs=1024, auto=1 20:26:11.710 (loader): gauge old value = 39 20:26:11.715 (loader): flash, block=40, bs=1024, auto=1 20:26:11.720 (loader): gauge old value = 40 20:26:11.726 (loader): flash, block=41, bs=1024, auto=1 20:26:11.730 (loader): gauge old value = 41 20:26:11.741 (loader): flash, block=42, bs=1024, auto=1 20:26:11.745 (loader): gauge old value = 42 20:26:11.750 (loader): flash, block=43, bs=1024, auto=1 20:26:11.756 (loader): gauge old value = 43 20:26:11.760 (loader): flash, block=44, bs=1024, auto=1 20:26:11.770 (loader): gauge old value = 44 20:26:11.780 (loader): flash, block=45, bs=1024, auto=1 20:26:11.780 (loader): gauge old value = 45 20:26:11.791 (loader): flash, block=46, bs=1024, auto=1 20:26:11.800 (loader): gauge old value = 46 20:26:11.806 (loader): flash, block=47, bs=1024, auto=1 20:26:11.810 (loader): gauge old value = 47 20:26:11.810 (loader): flash, block=48, bs=1024, auto=1 20:26:11.825 (loader): gauge old value = 48 20:26:11.830 (loader): flash, block=49, bs=1024, auto=1 20:26:11.830 (loader): gauge old value = 49 20:26:11.840 (loader): flash, block=50, bs=1024, auto=1 20:26:11.840 (loader): gauge old value = 50 20:26:11.850 (loader): flash, block=51, bs=1024, auto=1 20:26:11.860 (loader): gauge old value = 51 20:26:11.865 (loader): flash, block=52, bs=1024, auto=1 20:26:11.870 (loader): gauge old value = 52 20:26:11.874 (loader): flash, block=53, bs=1024, auto=1 20:26:11.880 (loader): gauge old value = 53 20:26:11.890 (loader): sending reboot 20:26:11.890 (loader): begin wait_until_offline 20:26:11.900 (loader): offline, waited 0 20:26:11.902 (ports 5): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:26:11.902 (ports 5): remove: loc=usb:0/140000/0/8/6 20:26:11.902 (ports 5): usb_remove: usb:0/140000/0/8/6 20:26:11.902 (ports 5): nothing new, skipping HID & Ports enum 20:26:11.911 (loader): end operation, total time = 1.376 seconds 20:26:11.920 (loader): set background IMG_REBOOT_OK 20:26:11.925 (loader): redraw timer set, image 14 to show for 1200 ms 20:26:11.968 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:26:11.969 (ports 5): nothing new, skipping HID & Ports enum 20:26:12.060 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:26:12.060 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:26:12.074 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:26:12.074 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:26:12.084 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:26:12.090 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:26:12.090 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:26:12.100 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:26:12.110 (loader): HID/win32: vid:051D pid:0002 ver:0106 20:26:12.257 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:26:12.258 (ports 5): nothing new, skipping HID & Ports enum 20:26:12.265 (ports 5): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:26:12.266 (ports 5): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1000020#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:26:12.266 (ports 5): found_usb_device, loc=usb:0/140000/0/8/6 Port_#0006.Hub_#0003 20:26:12.266 (ports 5): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0278 20:26:12.266 (ports 5): found_usb_device, devinst=0000001f 20:26:12.266 (ports 5): add: loc=usb:0/140000/0/8/6, class=Ports, vid=16C0, pid=0483, ver=0278, serial=1000020, dev=\\?\usb#vid_16c0&pid_0483#1000020#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:26:12.266 (ports 5): comport_from_devinst_list attempt 20:26:12.266 (ports 5): found Ports in classguid_list at index=0 20:26:12.266 (ports 5): port COM20 found from devnode 20:26:12.266 (ports 5): found_usb_device complete 20:26:12.267 (ports 5): usb_add: usb:0/140000/0/8/6 COM20 (Teensy 4-Beta) Serial 20:26:12.358 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:26:12.358 (ports 5): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:26:12.359 (ports 5): nothing new, skipping HID & Ports enum 20:26:13.130 (loader): redraw, image 9 20:26:43.957 (ports 5): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:26:43.958 (ports 5): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#863660#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:26:43.958 (ports 5): found_usb_device, loc=usb:0/140000/0/8/2 Port_#0002.Hub_#0003 20:26:43.958 (ports 5): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0275 20:26:43.958 (ports 5): found_usb_device, devinst=0000001e 20:26:43.958 (ports 5): add: loc=usb:0/140000/0/8/2, class=Ports, vid=16C0, pid=0483, ver=0275, serial=863660, dev=\\?\usb#vid_16c0&pid_0483#863660#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:26:43.958 (ports 5): comport_from_devinst_list attempt 20:26:43.958 (ports 5): found Ports in classguid_list at index=0 20:26:43.958 (ports 5): port COM19 found from devnode 20:26:43.958 (ports 5): found_usb_device complete 20:26:43.959 (ports 5): usb_add: usb:0/140000/0/8/2 COM19 (Teensy 3.2) Serial 20:26:44.038 (ports 5): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:26:44.040 (ports 5): nothing new, skipping HID & Ports enum 20:26:44.040 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:26:44.041 (ports 5): nothing new, skipping HID & Ports enum 20:26:44.055 (ports 5): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:26:44.057 (ports 5): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#868130#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:26:44.057 (ports 5): found_usb_device, loc=usb:0/140000/0/8/3 Port_#0003.Hub_#0003 20:26:44.057 (ports 5): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0275 20:26:44.057 (ports 5): found_usb_device, devinst=00000005 20:26:44.057 (ports 5): add: loc=usb:0/140000/0/8/3, class=Ports, vid=16C0, pid=0483, ver=0275, serial=868130, dev=\\?\usb#vid_16c0&pid_0483#868130#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:26:44.057 (ports 5): comport_from_devinst_list attempt 20:26:44.057 (ports 5): found Ports in classguid_list at index=0 20:26:44.057 (ports 5): port COM13 found from devnode 20:26:44.057 (ports 5): found_usb_device complete 20:26:44.059 (ports 5): usb_add: usb:0/140000/0/8/3 COM13 (Teensy 3.2) Serial 20:26:44.200 (ports 5): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:26:44.202 (ports 5): nothing new, skipping HID & Ports enum 20:26:44.251 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:26:44.253 (ports 5): nothing new, skipping HID & Ports enum 20:30:00.056 (serialmon 14): Begin, version=1.46-beta8, high-res time 20:30:00.056 (serialmon 14): listening for location: usb:0/140000/0/8/6 20:30:00.056 (serialmon 14): LoadLibrary cfgmgr32 ok 20:30:00.056 (serialmon 14): LoadLibrary ntdll ok 20:30:00.062 (serialmon 14): callback 0024 20:30:00.062 (serialmon 14): callback 0081 20:30:00.065 (serialmon 14): callback 0083 20:30:00.068 (serialmon 14): hWnd = 23008942 20:30:00.068 (serialmon 14): loop stdin, ready=2097151 20:30:00.071 (serialmon 14): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#868130#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:30:00.071 (serialmon 14): found_usb_device, loc=usb:0/140000/0/8/3 Port_#0003.Hub_#0003 20:30:00.071 (serialmon 14): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0275 20:30:00.071 (serialmon 14): found_usb_device, devinst=00000005 20:30:00.071 (serialmon 14): add: loc=usb:0/140000/0/8/3, class=Ports, vid=16C0, pid=0483, ver=0275, serial=868130, dev=\\?\usb#vid_16c0&pid_0483#868130#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:30:00.071 (serialmon 14): comport_from_devinst_list attempt 20:30:00.071 (serialmon 14): found Ports in classguid_list at index=0 20:30:00.071 (serialmon 14): port COM13 found from devnode 20:30:00.071 (serialmon 14): found_usb_device complete 20:30:00.072 (serialmon 14): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1000020#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:30:00.072 (serialmon 14): found_usb_device, loc=usb:0/140000/0/8/6 Port_#0006.Hub_#0003 20:30:00.072 (serialmon 14): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0278 20:30:00.072 (serialmon 14): found_usb_device, devinst=00000006 20:30:00.072 (serialmon 14): add: loc=usb:0/140000/0/8/6, class=Ports, vid=16C0, pid=0483, ver=0278, serial=1000020, dev=\\?\usb#vid_16c0&pid_0483#1000020#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:30:00.072 (serialmon 14): comport_from_devinst_list attempt 20:30:00.072 (serialmon 14): found Ports in classguid_list at index=0 20:30:00.072 (serialmon 14): port COM20 found from devnode 20:30:00.072 (serialmon 14): found_usb_device complete 20:30:00.072 (serialmon 14): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#863660#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:30:00.072 (serialmon 14): found_usb_device, loc=usb:0/140000/0/8/2 Port_#0002.Hub_#0003 20:30:00.072 (serialmon 14): found_usb_device, devinst=00000007 20:30:00.072 (serialmon 14): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0275 20:30:00.072 (serialmon 14): add: loc=usb:0/140000/0/8/2, class=Ports, vid=16C0, pid=0483, ver=0275, serial=863660, dev=\\?\usb#vid_16c0&pid_0483#863660#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:30:00.072 (serialmon 14): comport_from_devinst_list attempt 20:30:00.072 (serialmon 14): found Ports in classguid_list at index=0 20:30:00.072 (serialmon 14): port COM19 found from devnode 20:30:00.072 (serialmon 14): found_usb_device complete 20:30:00.074 (serialmon 14): usb_add: usb:0/140000/0/8/2 20:30:03.082 (loader): remote connection 1712 opened 20:30:03.104 (serialmon 14): usb_add: usb:0/140000/0/8/6 20:30:03.104 (serialmon 14): translate "COM20" -> "\\.\COM20" 20:30:03.219 (serialmon 14): GetDefaultCommConfig success 20:30:03.313 (serialmon 14): SetDefaultCommConfig success 20:30:03.313 (serialmon 14): Opened \\.\COM20 Serial 20:30:03.314 (serialmon 14): usb_add: usb:0/140000/0/8/3 20:30:03.316 (ports 5): callback 001A 20:30:09.031 (loader): remote connection 1712 closed 20:30:12.983 (loader): remote connection 1712 opened 20:30:12.983 (loader): remote cmd from 1712: "comment: Teensyduino 1.46-beta8 - WINDOWS (teensy_post_compile)" 20:30:12.985 (post_compile 15): Begin, version=1.46-beta8, high-res time 20:30:12.996 (post_compile 15): Sending command: comment: Teensyduino 1.46-beta8 - WINDOWS (teensy_post_compile) 20:30:12.999 (loader): file changed 20:30:13.014 (loader): File "ssd1306_FlexIO_128x32_spi_muilti.ino.hex". 54316 bytes, 3% used 20:30:13.014 (loader): remote cmd from 1712: "status" 20:30:13.030 (loader): remote cmd from 1712: "dir:T:\TEMP\arduino_build_10720\" 20:30:13.038 (post_compile 15): Status: 1, 1, 0, 2, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:30:13.038 (post_compile 15): Sending command: dir:T:\TEMP\arduino_build_10720\ 20:30:13.046 (loader): remote cmd from 1712: "file:ssd1306_FlexIO_128x32_spi_muilti.ino.hex" 20:30:13.046 (post_compile 15): Sending command: file:ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:30:13.061 (loader): File "ssd1306_FlexIO_128x32_spi_muilti.ino.hex". 54316 bytes, 3% used 20:30:13.061 (loader): remote cmd from 1712: "status" 20:30:13.082 (post_compile 15): Status: 1, 1, 0, 2, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:30:13.082 (post_compile 15): Disconnect 20:30:13.104 (loader): remote connection 1712 closed 20:30:13.468 (post_compile 16): Begin, version=1.46-beta8, high-res time 20:30:13.471 (loader): remote connection 1492 opened 20:30:13.471 (loader): remote cmd from 1492: "comment: Teensyduino 1.46-beta8 - WINDOWS (teensy_post_compile)" 20:30:13.471 (loader): remote cmd from 1492: "status" 20:30:13.479 (post_compile 16): Sending command: comment: Teensyduino 1.46-beta8 - WINDOWS (teensy_post_compile) 20:30:13.487 (loader): remote cmd from 1492: "dir:T:\TEMP\arduino_build_10720\" 20:30:13.497 (post_compile 16): Status: 1, 1, 0, 2, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:30:13.497 (post_compile 16): Sending command: dir:T:\TEMP\arduino_build_10720\ 20:30:13.503 (loader): remote cmd from 1492: "file:ssd1306_FlexIO_128x32_spi_muilti.ino.hex" 20:30:13.507 (post_compile 16): Sending command: file:ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:30:13.518 (loader): File "ssd1306_FlexIO_128x32_spi_muilti.ino.hex". 54316 bytes, 3% used 20:30:13.534 (loader): remote cmd from 1492: "status" 20:30:13.547 (post_compile 16): Status: 1, 1, 0, 2, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:30:13.547 (post_compile 16): Disconnect 20:30:13.560 (post_compile 17): Running teensy_reboot: "T:\arduino-1.8.8T4_146\hardware\teensy\..\tools\teensy_reboot.exe" teensy_reboot.exe "-board=TEENSY40" "-port=usb:0/140000/0/8/6" "-portlabel=hid#vid_16c0&pid_0478 (Teensy 4-Beta) Bootloader" "-portprotocol=Teensy" 20:30:13.576 (loader): remote connection 1492 closed 20:30:13.576 (loader): remote connection 1492 opened 20:30:13.631 (reboot 18): Begin, version=1.46-beta8, high-res time 20:30:13.631 (reboot 18): location = usb:0/140000/0/8/6 20:30:13.631 (reboot 18): portlabel = hid#vid_16c0&pid_0478 (Teensy 4-Beta) Bootloader 20:30:13.631 (reboot 18): portprotocol = Teensy 20:30:13.631 (reboot 18): Only location usb:0/140000/0/8/6 will be tried 20:30:13.631 (reboot 18): LoadLibrary cfgmgr32 ok 20:30:13.631 (reboot 18): LoadLibrary ntdll ok 20:30:13.633 (reboot 18): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#868130#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:30:13.633 (reboot 18): found_usb_device, loc=usb:0/140000/0/8/3 Port_#0003.Hub_#0003 20:30:13.633 (reboot 18): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0275 20:30:13.633 (reboot 18): found_usb_device, devinst=00000005 20:30:13.633 (reboot 18): add: loc=usb:0/140000/0/8/3, class=Ports, vid=16C0, pid=0483, ver=0275, serial=868130, dev=\\?\usb#vid_16c0&pid_0483#868130#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:30:13.633 (reboot 18): comport_from_devinst_list attempt 20:30:13.633 (reboot 18): found Ports in classguid_list at index=0 20:30:13.633 (reboot 18): port COM13 found from devnode 20:30:13.633 (reboot 18): found_usb_device complete 20:30:13.633 (reboot 18): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1000020#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:30:13.633 (reboot 18): found_usb_device, loc=usb:0/140000/0/8/6 Port_#0006.Hub_#0003 20:30:13.633 (reboot 18): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0278 20:30:13.633 (reboot 18): found_usb_device, devinst=00000006 20:30:13.633 (reboot 18): add: loc=usb:0/140000/0/8/6, class=Ports, vid=16C0, pid=0483, ver=0278, serial=1000020, dev=\\?\usb#vid_16c0&pid_0483#1000020#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:30:13.633 (reboot 18): comport_from_devinst_list attempt 20:30:13.633 (reboot 18): found Ports in classguid_list at index=0 20:30:13.633 (reboot 18): port COM20 found from devnode 20:30:13.633 (reboot 18): found_usb_device complete 20:30:13.634 (reboot 18): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#863660#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:30:13.634 (reboot 18): found_usb_device, loc=usb:0/140000/0/8/2 Port_#0002.Hub_#0003 20:30:13.634 (reboot 18): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0275 20:30:13.634 (reboot 18): found_usb_device, devinst=00000007 20:30:13.634 (reboot 18): add: loc=usb:0/140000/0/8/2, class=Ports, vid=16C0, pid=0483, ver=0275, serial=863660, dev=\\?\usb#vid_16c0&pid_0483#863660#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:30:13.634 (reboot 18): comport_from_devinst_list attempt 20:30:13.634 (reboot 18): found Ports in classguid_list at index=0 20:30:13.634 (reboot 18): port COM19 found from devnode 20:30:13.634 (reboot 18): found_usb_device complete 20:30:13.638 (loader): remote connection 1712 opened 20:30:13.638 (loader): remote cmd from 1712: "show:arduino_attempt_reboot" 20:30:13.648 (reboot 18): found Teensy Loader, version 1.46 20:30:13.648 (reboot 18): Sending command: show:arduino_attempt_reboot 20:30:13.654 (loader): got request to show arduino rebooting message 20:30:13.654 (loader): remote cmd from 1712: "comment: Teensyduino 1.46-beta8 - WINDOWS (teensy_reboot)" 20:30:13.665 (reboot 18): Sending command: comment: Teensyduino 1.46-beta8 - WINDOWS (teensy_reboot) 20:30:13.669 (loader): remote cmd from 1712: "status" 20:30:13.680 (reboot 18): Status: 1, 1, 0, 2, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:30:13.680 (reboot 18): do_reset (serial) COM20 20:30:13.685 (loader): remote cmd from 1712: "status" 20:30:13.707 (reboot 18): Status: 1, 1, 0, 2, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:30:13.707 (reboot 18): status read, retry 0 20:30:13.778 (ports 5): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:30:13.780 (ports 5): remove: loc=usb:0/140000/0/8/6 20:30:13.780 (ports 5): usb_remove: usb:0/140000/0/8/6 20:30:13.780 (ports 5): nothing new, skipping HID & Ports enum 20:30:13.810 (loader): remote cmd from 1712: "status" 20:30:13.835 (reboot 18): Status: 1, 1, 0, 2, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:30:13.835 (reboot 18): status read, retry 1 20:30:13.837 (ports 5): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:30:13.838 (ports 5): nothing new, skipping HID & Ports enum 20:30:13.838 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:30:13.839 (ports 5): nothing new, skipping HID & Ports enum 20:30:13.943 (loader): remote cmd from 1712: "status" 20:30:13.952 (reboot 18): Status: 1, 1, 0, 2, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:30:13.952 (reboot 18): status read, retry 2 20:30:14.060 (loader): remote cmd from 1712: "status" 20:30:14.069 (reboot 18): Status: 1, 1, 0, 2, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:30:14.069 (reboot 18): status read, retry 3 20:30:14.176 (loader): remote cmd from 1712: "status" 20:30:14.183 (reboot 18): Status: 1, 1, 0, 2, 0, 0, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:30:14.183 (reboot 18): status read, retry 4 20:30:14.239 (ports 5): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:30:14.241 (ports 5): found_usb_device, id=\\?\usb#vid_16c0&pid_0478#000186a2#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:30:14.241 (ports 5): found_usb_device, loc=usb:0/140000/0/8/6 Port_#0006.Hub_#0003 20:30:14.241 (ports 5): found_usb_device, devinst=00000020 20:30:14.241 (ports 5): found_usb_device, hwid=USB\VID_16C0&PID_0478&REV_0002 20:30:14.241 (ports 5): add: loc=usb:0/140000/0/8/6, class=HID, vid=16C0, pid=0478, ver=0002, serial=000186a2, dev=\\?\usb#vid_16c0&pid_0478#000186a2#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:30:14.241 (ports 5): hiddev_from_devinst_list: iface=0 20:30:14.242 (ports 5): found_usb_device complete 20:30:14.243 (ports 5): usb_add: usb:0/140000/0/8/6 [no_device] (Teensy 4-Beta) Bootloader 20:30:14.299 (loader): remote cmd from 1712: "status" 20:30:14.310 (loader): Device came online, code_size = 1572864 20:30:14.320 (loader): Board is: Teensy 4-Beta1 (IMXRT1052), version 0.02 20:30:14.334 (loader): File "ssd1306_FlexIO_128x32_spi_muilti.ino.hex". 54316 bytes, 3% used 20:30:14.339 (loader): set background IMG_ONLINE 20:30:14.360 (loader): File "ssd1306_FlexIO_128x32_spi_muilti.ino.hex". 54316 bytes, 3% used 20:30:14.369 (loader): elf size appears to be 1572864 20:30:14.374 (loader): elf binary data matches hex file 20:30:14.380 (loader): Code size from .elf file = 1572864 20:30:14.390 (loader): begin operation 20:30:14.404 (reboot 18): Status: 1, 1, 1, 3, 0, 1, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:30:14.407 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:30:14.409 (ports 5): hid, found devinst=00000021 20:30:14.409 (ports 5): hid, path=\\?\hid#vid_16c0&pid_0478#6&a69549&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 20:30:14.409 (ports 5): hid, opened handle 20:30:14.409 (ports 5): devinst=00000021, location=usb:0/140000/0/8/6 20:30:14.409 (ports 5): vid=16C0, pid=0478, ver=0002, usepage=FF9C, use=0023 20:30:14.409 (ports 5): devpath=\\?\hid#vid_16c0&pid_0478#6&a69549&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 20:30:14.410 (ports 5): usb_add: usb:0/140000/0/8/6 hid#vid_16c0&pid_0478 (Teensy 4-Beta) Bootloader 20:30:14.470 (loader): remote cmd from 1712: "status" 20:30:14.485 (loader): flash, block=0, bs=1024, auto=1 20:30:14.486 (reboot 18): Status: 1, 1, 1, 3, 0, 1, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:30:14.489 (loader): gauge old value = 0 20:30:14.491 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:30:14.492 (ports 5): nothing new, skipping HID & Ports enum 20:30:14.530 (loader): flash, block=1, bs=1024, auto=1 20:30:14.659 (loader): gauge old value = 1 20:30:14.669 (loader): remote cmd from 1712: "status" 20:30:14.679 (loader): flash, block=2, bs=1024, auto=1 20:30:14.680 (reboot 18): Status: 1, 1, 1, 3, 0, 1, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:30:14.860 (loader): gauge old value = 2 20:30:14.860 (loader): remote cmd from 1712: "status" 20:30:14.880 (loader): flash, block=3, bs=1024, auto=1 20:30:14.880 (reboot 18): Status: 1, 1, 1, 3, 0, 1, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:30:14.890 (loader): gauge old value = 3 20:30:14.900 (loader): flash, block=4, bs=1024, auto=1 20:30:14.900 (loader): gauge old value = 4 20:30:14.919 (loader): flash, block=5, bs=1024, auto=1 20:30:14.929 (loader): gauge old value = 5 20:30:14.945 (loader): remote cmd from 1712: "status" 20:30:14.951 (loader): flash, block=6, bs=1024, auto=1 20:30:14.956 (reboot 18): Status: 1, 1, 1, 3, 0, 1, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:30:14.960 (loader): gauge old value = 6 20:30:14.970 (loader): flash, block=7, bs=1024, auto=1 20:30:14.980 (loader): gauge old value = 7 20:30:14.993 (loader): flash, block=8, bs=1024, auto=1 20:30:15.004 (loader): gauge old value = 8 20:30:15.009 (loader): flash, block=9, bs=1024, auto=1 20:30:15.027 (loader): gauge old value = 9 20:30:15.029 (loader): flash, block=10, bs=1024, auto=1 20:30:15.040 (loader): gauge old value = 10 20:30:15.051 (loader): flash, block=11, bs=1024, auto=1 20:30:15.060 (loader): gauge old value = 11 20:30:15.070 (loader): flash, block=12, bs=1024, auto=1 20:30:15.080 (loader): gauge old value = 12 20:30:15.089 (loader): flash, block=13, bs=1024, auto=1 20:30:15.100 (loader): gauge old value = 13 20:30:15.100 (loader): flash, block=14, bs=1024, auto=1 20:30:15.110 (loader): gauge old value = 14 20:30:15.127 (loader): flash, block=15, bs=1024, auto=1 20:30:15.130 (loader): gauge old value = 15 20:30:15.140 (loader): flash, block=16, bs=1024, auto=1 20:30:15.151 (loader): gauge old value = 16 20:30:15.161 (loader): flash, block=17, bs=1024, auto=1 20:30:15.169 (loader): gauge old value = 17 20:30:15.179 (loader): flash, block=18, bs=1024, auto=1 20:30:15.201 (loader): gauge old value = 18 20:30:15.214 (loader): flash, block=19, bs=1024, auto=1 20:30:15.220 (loader): gauge old value = 19 20:30:15.229 (loader): flash, block=20, bs=1024, auto=1 20:30:15.245 (loader): gauge old value = 20 20:30:15.251 (loader): remote cmd from 1712: "status" 20:30:15.268 (loader): flash, block=21, bs=1024, auto=1 20:30:15.268 (reboot 18): Status: 1, 1, 1, 3, 0, 1, T:\TEMP\arduino_build_10720\, ssd1306_FlexIO_128x32_spi_muilti.ino.hex 20:30:15.269 (loader): gauge old value = 21 20:30:15.280 (loader): flash, block=22, bs=1024, auto=1 20:30:15.297 (loader): gauge old value = 22 20:30:15.299 (loader): flash, block=23, bs=1024, auto=1 20:30:15.309 (loader): gauge old value = 23 20:30:15.320 (loader): flash, block=24, bs=1024, auto=1 20:30:15.329 (loader): gauge old value = 24 20:30:15.340 (loader): flash, block=25, bs=1024, auto=1 20:30:15.340 (reboot 18): status read, retry 5 20:30:15.340 (reboot 18): Success 20:30:15.340 (reboot 18): Disconnect 20:30:15.349 (loader): gauge old value = 25 20:30:15.351 (loader): flash, block=26, bs=1024, auto=1 20:30:15.369 (loader): gauge old value = 26 20:30:15.381 (loader): remote connection 1712 closed 20:30:15.381 (loader): remote connection 1492 closed 20:30:15.465 (loader): flash, block=27, bs=1024, auto=1 20:30:15.480 (loader): gauge old value = 27 20:30:15.490 (loader): flash, block=28, bs=1024, auto=1 20:30:15.492 (serialmon 19): Begin, version=1.46-beta8, high-res time 20:30:15.492 (serialmon 19): listening for location: usb:0/140000/0/8/6 20:30:15.492 (serialmon 19): LoadLibrary cfgmgr32 ok 20:30:15.492 (serialmon 19): LoadLibrary ntdll ok 20:30:15.498 (serialmon 19): callback 0024 20:30:15.498 (serialmon 19): callback 0081 20:30:15.499 (loader): gauge old value = 28 20:30:15.502 (serialmon 19): callback 0083 20:30:15.506 (serialmon 19): hWnd = 31594124 20:30:15.509 (serialmon 19): loop stdin, ready=2097151 20:30:15.509 (serialmon 19): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#868130#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:30:15.509 (serialmon 19): found_usb_device, loc=usb:0/140000/0/8/3 Port_#0003.Hub_#0003 20:30:15.509 (serialmon 19): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0275 20:30:15.509 (serialmon 19): found_usb_device, devinst=00000005 20:30:15.509 (serialmon 19): add: loc=usb:0/140000/0/8/3, class=Ports, vid=16C0, pid=0483, ver=0275, serial=868130, dev=\\?\usb#vid_16c0&pid_0483#868130#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:30:15.509 (serialmon 19): comport_from_devinst_list attempt 20:30:15.509 (serialmon 19): found Ports in classguid_list at index=0 20:30:15.509 (serialmon 19): port COM13 found from devnode 20:30:15.509 (serialmon 19): found_usb_device complete 20:30:15.510 (serialmon 19): found_usb_device, id=\\?\usb#vid_16c0&pid_0478#000186a2#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:30:15.510 (serialmon 19): found_usb_device, loc=usb:0/140000/0/8/6 Port_#0006.Hub_#0003 20:30:15.510 (serialmon 19): found_usb_device, hwid=USB\VID_16C0&PID_0478&REV_0002 20:30:15.510 (serialmon 19): found_usb_device, devinst=00000006 20:30:15.510 (serialmon 19): add: loc=usb:0/140000/0/8/6, class=HID, vid=16C0, pid=0478, ver=0002, serial=000186a2, dev=\\?\usb#vid_16c0&pid_0478#000186a2#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:30:15.510 (serialmon 19): hiddev_from_devinst_list: iface=0 20:30:15.511 (serialmon 19): found_usb_device complete 20:30:15.512 (serialmon 19): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#863660#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:30:15.512 (serialmon 19): found_usb_device, loc=usb:0/140000/0/8/2 Port_#0002.Hub_#0003 20:30:15.512 (serialmon 19): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0275 20:30:15.512 (serialmon 19): found_usb_device, devinst=00000007 20:30:15.512 (serialmon 19): add: loc=usb:0/140000/0/8/2, class=Ports, vid=16C0, pid=0483, ver=0275, serial=863660, dev=\\?\usb#vid_16c0&pid_0483#863660#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:30:15.512 (serialmon 19): comport_from_devinst_list attempt 20:30:15.512 (serialmon 19): found Ports in classguid_list at index=0 20:30:15.512 (serialmon 19): port COM19 found from devnode 20:30:15.512 (serialmon 19): found_usb_device complete 20:30:15.513 (serialmon 19): hid, found devinst=0000000D 20:30:15.513 (loader): flash, block=29, bs=1024, auto=1 20:30:15.513 (serialmon 19): usb_add: usb:0/140000/0/8/2 20:30:15.520 (loader): gauge old value = 29 20:30:15.520 (loader): flash, block=30, bs=1024, auto=1 20:30:15.530 (loader): gauge old value = 30 20:30:15.540 (loader): flash, block=31, bs=1024, auto=1 20:30:15.545 (loader): gauge old value = 31 20:30:15.551 (loader): flash, block=32, bs=1024, auto=1 20:30:15.555 (loader): gauge old value = 32 20:30:15.563 (loader): flash, block=33, bs=1024, auto=1 20:30:15.563 (loader): gauge old value = 33 20:30:15.581 (loader): flash, block=34, bs=1024, auto=1 20:30:15.582 (loader): gauge old value = 34 20:30:15.582 (loader): flash, block=35, bs=1024, auto=1 20:30:15.597 (loader): gauge old value = 35 20:30:15.597 (loader): flash, block=36, bs=1024, auto=1 20:30:15.613 (loader): gauge old value = 36 20:30:15.613 (loader): flash, block=37, bs=1024, auto=1 20:30:15.627 (loader): gauge old value = 37 20:30:15.628 (loader): flash, block=38, bs=1024, auto=1 20:30:15.628 (loader): gauge old value = 38 20:30:15.643 (loader): flash, block=39, bs=1024, auto=1 20:30:15.644 (loader): gauge old value = 39 20:30:15.651 (loader): flash, block=40, bs=1024, auto=1 20:30:15.660 (loader): gauge old value = 40 20:30:15.661 (loader): flash, block=41, bs=1024, auto=1 20:30:15.661 (loader): gauge old value = 41 20:30:15.677 (loader): flash, block=42, bs=1024, auto=1 20:30:15.678 (loader): gauge old value = 42 20:30:15.678 (loader): flash, block=43, bs=1024, auto=1 20:30:15.678 (loader): gauge old value = 43 20:30:15.694 (loader): flash, block=44, bs=1024, auto=1 20:30:15.694 (loader): gauge old value = 44 20:30:15.709 (loader): flash, block=45, bs=1024, auto=1 20:30:15.709 (loader): gauge old value = 45 20:30:15.709 (loader): flash, block=46, bs=1024, auto=1 20:30:15.725 (loader): gauge old value = 46 20:30:15.725 (loader): flash, block=47, bs=1024, auto=1 20:30:15.725 (loader): gauge old value = 47 20:30:15.740 (loader): remote connection 1620 opened 20:30:15.740 (loader): flash, block=48, bs=1024, auto=1 20:30:15.749 (serialmon 19): usb_add: usb:0/140000/0/8/6 20:30:15.749 (serialmon 19): ignoring partial USB device discovery (Windows XP issue?) 20:30:15.749 (serialmon 19): usb_add: usb:0/140000/0/8/3 20:30:15.751 (loader): gauge old value = 48 20:30:15.751 (loader): flash, block=49, bs=1024, auto=1 20:30:15.761 (loader): gauge old value = 49 20:30:15.761 (loader): flash, block=50, bs=1024, auto=1 20:30:15.761 (loader): gauge old value = 50 20:30:15.776 (loader): flash, block=51, bs=1024, auto=1 20:30:15.776 (loader): gauge old value = 51 20:30:15.776 (loader): flash, block=52, bs=1024, auto=1 20:30:15.795 (loader): gauge old value = 52 20:30:15.795 (loader): flash, block=53, bs=1024, auto=1 20:30:15.795 (loader): gauge old value = 53 20:30:15.811 (loader): sending reboot 20:30:15.811 (loader): begin wait_until_offline 20:30:15.826 (loader): offline, waited 0 20:30:15.826 (loader): end operation, total time = 1.437 seconds 20:30:15.830 (ports 5): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:30:15.831 (ports 5): remove: loc=usb:0/140000/0/8/6 20:30:15.831 (ports 5): usb_remove: usb:0/140000/0/8/6 20:30:15.831 (ports 5): nothing new, skipping HID & Ports enum 20:30:15.832 (serialmon 19): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:30:15.834 (serialmon 19): remove: loc=usb:0/140000/0/8/6 20:30:15.834 (serialmon 19): usb_remove: usb:0/140000/0/8/6 20:30:15.834 (serialmon 19): nothing new, skipping HID & Ports enum 20:30:15.842 (loader): set background IMG_REBOOT_OK 20:30:15.851 (loader): redraw timer set, image 14 to show for 1200 ms 20:30:15.863 (serialmon 19): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:30:15.864 (serialmon 19): nothing new, skipping HID & Ports enum 20:30:15.865 (serialmon 19): nothing new, skipping HID & Ports enum 20:30:15.944 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:30:15.946 (ports 5): nothing new, skipping HID & Ports enum 20:30:15.995 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:30:15.995 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:30:16.005 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:30:16.016 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:30:16.026 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:30:16.036 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:30:16.045 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:30:16.045 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:30:16.056 (loader): HID/win32: vid:051D pid:0002 ver:0106 20:30:16.111 (serialmon 19): retry device discovery (Windows XP workaround) 20:30:16.112 (serialmon 19): nothing new, skipping HID & Ports enum 20:30:16.130 (serialmon 19): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:30:16.130 (ports 5): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:30:16.131 (serialmon 19): nothing new, skipping HID & Ports enum 20:30:16.131 (serialmon 19): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:30:16.132 (ports 5): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1000020#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:30:16.132 (ports 5): found_usb_device, loc=usb:0/140000/0/8/6 Port_#0006.Hub_#0003 20:30:16.132 (ports 5): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0278 20:30:16.132 (ports 5): found_usb_device, devinst=0000001f 20:30:16.132 (ports 5): add: loc=usb:0/140000/0/8/6, class=Ports, vid=16C0, pid=0483, ver=0278, serial=1000020, dev=\\?\usb#vid_16c0&pid_0483#1000020#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:30:16.132 (ports 5): comport_from_devinst_list attempt 20:30:16.132 (ports 5): found Ports in classguid_list at index=0 20:30:16.132 (ports 5): port COM20 found from devnode 20:30:16.132 (ports 5): found_usb_device complete 20:30:16.133 (serialmon 19): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1000020#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:30:16.133 (serialmon 19): found_usb_device, loc=usb:0/140000/0/8/6 Port_#0006.Hub_#0003 20:30:16.133 (serialmon 19): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0278 20:30:16.133 (serialmon 19): found_usb_device, devinst=00000021 20:30:16.133 (serialmon 19): add: loc=usb:0/140000/0/8/6, class=Ports, vid=16C0, pid=0483, ver=0278, serial=1000020, dev=\\?\usb#vid_16c0&pid_0483#1000020#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:30:16.133 (serialmon 19): comport_from_devinst_list attempt 20:30:16.133 (serialmon 19): found Ports in classguid_list at index=0 20:30:16.133 (serialmon 19): port COM20 found from devnode 20:30:16.133 (serialmon 19): found_usb_device complete 20:30:16.134 (ports 5): usb_add: usb:0/140000/0/8/6 COM20 (Teensy 4-Beta) Serial 20:30:16.134 (serialmon 19): usb_add: usb:0/140000/0/8/6 20:30:16.134 (serialmon 19): translate "COM20" -> "\\.\COM20" 20:30:16.235 (serialmon 19): GetDefaultCommConfig success 20:30:16.245 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:30:16.246 (ports 5): nothing new, skipping HID & Ports enum 20:30:16.343 (serialmon 19): SetDefaultCommConfig success 20:30:16.343 (serialmon 19): Opened \\.\COM20 Serial 20:30:16.346 (ports 5): callback 001A 20:30:16.347 (serialmon 19): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:30:16.348 (serialmon 19): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:30:16.351 (serialmon 19): callback 001A 20:30:16.355 (serialmon 19): nothing new, skipping HID & Ports enum 20:30:16.654 (ports 5): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:30:16.654 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:30:16.657 (ports 5): nothing new, skipping HID & Ports enum 20:30:17.055 (loader): redraw, image 9