20:05:38.009 (ports 1): Begin, version=1.42-beta4, high-res time 20:05:38.009 (ports 1): LoadLibrary cfgmgr32 ok 20:05:38.009 (ports 1): LoadLibrary ntdll ok 20:05:38.015 (ports 1): callback 0024 20:05:38.015 (ports 1): callback 0081 20:05:38.020 (ports 1): callback 0083 20:05:38.022 (ports 1): hWnd = 1509958 20:05:38.024 (ports 1): not already running 20:05:38.025 (ports 1): socket created 20:05:38.026 (ports 1): bound to port 28542 20:05:38.027 (ports 1): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#2056390#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:05:38.027 (ports 1): found_usb_device, loc=usb:0/140000/0/8/2 Port_#0002.Hub_#0005 20:05:38.027 (ports 1): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0200 20:05:38.027 (ports 1): found_usb_device, devinst=00000002 20:05:38.028 (ports 1): add: loc=usb:0/140000/0/8/2, class=Ports, vid=16C0, pid=0483, ver=0200, serial=205, dev=\\?\usb#vid_16c0&pid_0483#2056390#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:05:38.028 (ports 1): comport_from_devinst_list attempt 20:05:38.028 (ports 1): found Ports in classguid_list at index=0 20:05:38.028 (ports 1): port COM8 found from devnode 20:05:38.028 (ports 1): found_usb_device complete 20:05:38.028 (ports 1): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1113960#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:05:38.028 (ports 1): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0200 20:05:38.028 (ports 1): found_usb_device, loc=usb:0/140000/0/8/1 Port_#0001.Hub_#0005 20:05:38.028 (ports 1): found_usb_device, devinst=00000007 20:05:38.028 (ports 1): add: loc=usb:0/140000/0/8/1, class=Ports, vid=16C0, pid=0483, ver=0200, serial=111, dev=\\?\usb#vid_16c0&pid_0483#1113960#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:05:38.028 (ports 1): comport_from_devinst_list attempt 20:05:38.028 (ports 1): found Ports in classguid_list at index=0 20:05:38.028 (ports 1): port COM11 found from devnode 20:05:38.028 (ports 1): found_usb_device complete 20:05:38.030 (ports 1): usb_add: usb:0/140000/0/8/1 COM11 (Teensy) Serial 20:05:38.030 (ports 1): usb_add: usb:0/140000/0/8/2 COM8 (Teensy) Serial 20:05:42.899 (ports 1): incoming connection, port 60537 20:05:42.900 (ports 1): got command: "list" 20:05:42.901 (ports 1): nothing new, skipping HID & Ports enum 20:05:45.882 (ports 1): got command: "list" 20:05:45.883 (ports 1): nothing new, skipping HID & Ports enum 20:05:52.595 (ports 1): got command: "list" 20:05:52.596 (ports 1): nothing new, skipping HID & Ports enum 20:05:59.682 (loader): Teensy Loader 1.42-beta4, begin program 20:05:59.822 (loader): Listening for remote control on port 3149 20:05:59.822 (loader): initialized, showing main window 20:06:00.049 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:06:00.049 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:06:00.049 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:06:00.049 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:06:00.049 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:06:00.049 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:06:00.049 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:06:00.049 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:06:00.049 (loader): HID/win32: vid:051D pid:0002 ver:0106 20:06:04.719 (loader): remote connection 1348 opened 20:06:04.722 (ports 1): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:06:04.729 (ports 1): remove: loc=usb:0/140000/0/8/2 20:06:04.729 (ports 1): usb_remove: usb:0/140000/0/8/2 20:06:04.729 (ports 1): nothing new, skipping HID & Ports enum 20:06:04.744 (ports 1): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:06:04.744 (ports 1): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:06:04.745 (ports 1): nothing new, skipping HID & Ports enum 20:06:05.156 (ports 1): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:06:05.157 (ports 1): found_usb_device, id=\\?\usb#vid_16c0&pid_0478#00032347#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:06:05.157 (ports 1): found_usb_device, loc=usb:0/140000/0/8/2 Port_#0002.Hub_#0005 20:06:05.157 (ports 1): found_usb_device, hwid=USB\VID_16C0&PID_0478&REV_0103 20:06:05.157 (ports 1): found_usb_device, devinst=0000001c 20:06:05.157 (ports 1): add: loc=usb:0/140000/0/8/2, class=HID, vid=16C0, pid=0478, ver=0103, serial=000, dev=\\?\usb#vid_16c0&pid_0478#00032347#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:06:05.157 (ports 1): hiddev_from_devinst_list: iface=0 20:06:05.158 (ports 1): found_usb_device complete 20:06:05.159 (ports 1): usb_add: usb:0/140000/0/8/2 [no_device] (Teensy) Bootloader 20:06:05.173 (ports 1): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:06:05.174 (ports 1): hid, found devinst=0000001D 20:06:05.174 (ports 1): hid, path=\\?\hid#vid_16c0&pid_0478#8&1e4f6cc3&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 20:06:05.174 (ports 1): hid, opened handle 20:06:05.174 (ports 1): devinst=0000001D, location=usb:0/140000/0/8/2 20:06:05.174 (ports 1): vid=16C0, pid=0478, ver=0103, usepage=FF9C, use=0022 20:06:05.174 (ports 1): devpath=\\?\hid#vid_16c0&pid_0478#8&1e4f6cc3&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 20:06:05.174 (ports 1): usb_add: usb:0/140000/0/8/2 \\?\hid#vid_16c0&pid_0478#8&1e4f6cc3&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} (Teensy 3.6) Bootloader 20:06:05.268 (ports 1): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:06:05.269 (ports 1): nothing new, skipping HID & Ports enum 20:06:05.294 (loader): Device came online, code_size = 1048576 20:06:05.294 (loader): Board is: Teensy 3.6 (MK66FX1M0), version 1.03 20:06:05.295 (loader): set background IMG_ONLINE 20:06:05.544 (loader): HID/win32: HidD_GetPreparsedData ok, device still online :-) 20:06:09.451 (ports 1): got command: "list" 20:06:09.452 (ports 1): nothing new, skipping HID & Ports enum 20:07:02.926 (post_compile 2): Begin, version=1.42-beta4, high-res time 20:07:02.930 (loader): remote connection 1380 opened 20:07:02.930 (post_compile 2): Sending command: comment: Teensyduino 1.42-beta4 - WINDOWS (teensy_post_compile) 20:07:02.931 (loader): remote cmd from 1380: "comment: Teensyduino 1.42-beta4 - WINDOWS (teensy_post_compile)" 20:07:02.931 (loader): remote cmd from 1380: "status" 20:07:02.931 (loader): remote cmd from 1380: "dir:T:\TEMP\arduino_build_466842\" 20:07:02.931 (loader): remote cmd from 1380: "file:MemFault.ino.hex" 20:07:02.931 (post_compile 2): Status: 0, 0, 1, 1, 0, 0, T:\TEMP\arduino_build_713104\, MemFault.ino.hex 20:07:02.931 (post_compile 2): Sending command: dir:T:\TEMP\arduino_build_466842\ 20:07:02.931 (post_compile 2): Sending command: file:MemFault.ino.hex 20:07:02.936 (loader): File "MemFault.ino.hex". 15004 bytes, 1% used 20:07:02.940 (loader): remote cmd from 1380: "status" 20:07:02.940 (post_compile 2): Status: 1, 0, 1, 1, 0, 0, T:\TEMP\arduino_build_466842\, MemFault.ino.hex 20:07:02.940 (post_compile 2): Disconnect 20:07:02.951 (loader): remote connection 1380 closed 20:07:03.288 (ports 1): got command: "list" 20:07:03.289 (ports 1): nothing new, skipping HID & Ports enum 20:07:03.291 (ports 1): got command: "list" 20:07:03.293 (ports 1): nothing new, skipping HID & Ports enum 20:07:04.058 (loader): remote connection 1384 opened 20:07:04.058 (loader): remote cmd from 1384: "comment: Teensyduino 1.42-beta4 - WINDOWS (teensy_post_compile)" 20:07:04.058 (loader): remote cmd from 1384: "status" 20:07:04.064 (post_compile 3): Begin, version=1.42-beta4, high-res time 20:07:04.068 (post_compile 3): Sending command: comment: Teensyduino 1.42-beta4 - WINDOWS (teensy_post_compile) 20:07:04.068 (post_compile 3): Status: 1, 0, 1, 1, 0, 0, T:\TEMP\arduino_build_466842\, MemFault.ino.hex 20:07:04.068 (loader): remote cmd from 1384: "dir:T:\TEMP\arduino_build_466842\" 20:07:04.068 (loader): remote cmd from 1384: "file:MemFault.ino.hex" 20:07:04.068 (loader): File "MemFault.ino.hex". 15004 bytes, 1% used 20:07:04.068 (loader): remote cmd from 1384: "status" 20:07:04.068 (post_compile 3): Sending command: dir:T:\TEMP\arduino_build_466842\ 20:07:04.069 (post_compile 3): Sending command: file:MemFault.ino.hex 20:07:04.075 (post_compile 3): Status: 1, 0, 1, 1, 0, 0, T:\TEMP\arduino_build_466842\, MemFault.ino.hex 20:07:04.075 (post_compile 3): Disconnect 20:07:04.088 (loader): remote connection 1384 closed 20:07:04.088 (loader): remote connection 1384 opened 20:07:04.089 (post_compile 4): Running teensy_reboot: "T:\arduino_1.8.5_142b4\hardware\teensy\..\tools\teensy_reboot.exe" teensy_reboot.exe "-board=TEENSY36" "-port=COM8" "-portlabel=COM8 (Teensy)" "-portprotocol=serial" 20:07:04.298 (reboot 5): Begin, version=1.42-beta4, high-res time 20:07:04.298 (reboot 5): location = COM8 20:07:04.298 (reboot 5): portlabel = COM8 (Teensy) 20:07:04.298 (reboot 5): portprotocol = serial 20:07:04.298 (reboot 5): Serial device COM8 will be tried first 20:07:04.298 (reboot 5): LoadLibrary cfgmgr32 ok 20:07:04.298 (reboot 5): LoadLibrary ntdll ok 20:07:04.298 (loader): remote connection 1300 opened 20:07:04.298 (loader): remote cmd from 1300: "show:arduino_attempt_reboot" 20:07:04.298 (loader): got request to show arduino rebooting message 20:07:04.300 (reboot 5): found_usb_device, id=\\?\usb#vid_16c0&pid_0478#00032347#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:07:04.300 (reboot 5): found_usb_device, loc=usb:0/140000/0/8/2 Port_#0002.Hub_#0005 20:07:04.300 (reboot 5): found_usb_device, hwid=USB\VID_16C0&PID_0478&REV_0103 20:07:04.300 (reboot 5): found_usb_device, devinst=00000006 20:07:04.300 (reboot 5): add: loc=usb:0/140000/0/8/2, class=HID, vid=16C0, pid=0478, ver=0103, serial=000, dev=\\?\usb#vid_16c0&pid_0478#00032347#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:07:04.300 (reboot 5): hiddev_from_devinst_list: iface=0 20:07:04.301 (reboot 5): found_usb_device complete 20:07:04.301 (reboot 5): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1113960#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:07:04.301 (reboot 5): found_usb_device, loc=usb:0/140000/0/8/1 Port_#0001.Hub_#0005 20:07:04.301 (reboot 5): found_usb_device, devinst=00000007 20:07:04.301 (reboot 5): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0200 20:07:04.301 (reboot 5): add: loc=usb:0/140000/0/8/1, class=Ports, vid=16C0, pid=0483, ver=0200, serial=111, dev=\\?\usb#vid_16c0&pid_0483#1113960#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:07:04.301 (reboot 5): comport_from_devinst_list attempt 20:07:04.301 (reboot 5): found Ports in classguid_list at index=0 20:07:04.301 (reboot 5): port COM11 found from devnode 20:07:04.301 (reboot 5): found_usb_device complete 20:07:04.302 (reboot 5): hid, found devinst=0000000C 20:07:04.306 (reboot 5): found Teensy Loader, version 1.42 20:07:04.306 (reboot 5): Sending command: show:arduino_attempt_reboot 20:07:04.308 (loader): remote cmd from 1300: "comment: Teensyduino 1.42-beta4 - WINDOWS (teensy_reboot)" 20:07:04.308 (loader): remote cmd from 1300: "status" 20:07:04.308 (loader): remote cmd from 1300: "auto:on" 20:07:04.308 (loader): File "MemFault.ino.hex". 15004 bytes, 1% used 20:07:04.311 (reboot 5): Sending command: comment: Teensyduino 1.42-beta4 - WINDOWS (teensy_reboot) 20:07:04.313 (reboot 5): Status: 1, 0, 1, 1, 0, 0, T:\TEMP\arduino_build_466842\, MemFault.ino.hex 20:07:04.313 (reboot 5): send: auto:on 20:07:04.313 (reboot 5): Sending command: auto:on 20:07:04.313 (reboot 5): Disconnect 20:07:04.318 (loader): elf size appears to be 1048576 20:07:04.318 (loader): elf binary data matches hex file 20:07:04.318 (loader): Code size from .elf file = 1048576 20:07:04.318 (loader): begin operation 20:07:04.341 (ports 1): got command: "list" 20:07:04.342 (ports 1): nothing new, skipping HID & Ports enum 20:07:04.345 (loader): remote connection 1300 closed 20:07:04.345 (loader): remote connection 1384 closed 20:07:04.347 (ports 1): got command: "list" 20:07:04.348 (ports 1): nothing new, skipping HID & Ports enum 20:07:04.353 (loader): flash, block=0, bs=1024, auto=1 20:07:04.365 (loader): flash, block=1, bs=1024, auto=1 20:07:04.369 (loader): flash, block=2, bs=1024, auto=1 20:07:04.371 (loader): flash, block=3, bs=1024, auto=1 20:07:04.645 (loader): flash, block=4, bs=1024, auto=1 20:07:04.645 (loader): flash, block=5, bs=1024, auto=1 20:07:04.665 (loader): flash, block=6, bs=1024, auto=1 20:07:04.665 (loader): flash, block=7, bs=1024, auto=1 20:07:04.665 (loader): flash, block=8, bs=1024, auto=1 20:07:04.695 (loader): flash, block=9, bs=1024, auto=1 20:07:04.695 (loader): flash, block=10, bs=1024, auto=1 20:07:04.695 (loader): flash, block=11, bs=1024, auto=1 20:07:04.725 (loader): flash, block=12, bs=1024, auto=1 20:07:04.725 (loader): flash, block=13, bs=1024, auto=1 20:07:04.725 (loader): flash, block=14, bs=1024, auto=1 20:07:04.725 (loader): sending reboot 20:07:04.755 (loader): begin wait_until_offline 20:07:04.827 (ports 1): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:07:04.828 (ports 1): remove: loc=usb:0/140000/0/8/2 20:07:04.828 (ports 1): usb_remove: usb:0/140000/0/8/2 20:07:04.828 (ports 1): nothing new, skipping HID & Ports enum 20:07:04.870 (loader): offline, waited 2 20:07:04.870 (loader): end operation, total time = 0.552 seconds 20:07:04.870 (loader): set background IMG_REBOOT_OK 20:07:04.870 (loader): redraw timer set, image 14 to show for 1200 ms 20:07:04.878 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:07:04.878 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:07:04.878 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:07:04.878 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:07:04.878 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:07:04.878 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:07:04.878 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:07:04.878 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:07:04.878 (loader): HID/win32: vid:051D pid:0002 ver:0106 20:07:04.880 (ports 1): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:07:04.880 (ports 1): nothing new, skipping HID & Ports enum 20:07:05.078 (ports 1): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:07:05.079 (ports 1): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#2056390#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:07:05.079 (ports 1): found_usb_device, loc=usb:0/140000/0/8/2 Port_#0002.Hub_#0005 20:07:05.079 (ports 1): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0200 20:07:05.079 (ports 1): found_usb_device, devinst=00000002 20:07:05.079 (ports 1): add: loc=usb:0/140000/0/8/2, class=Ports, vid=16C0, pid=0483, ver=0200, serial=205, dev=\\?\usb#vid_16c0&pid_0483#2056390#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:07:05.079 (ports 1): comport_from_devinst_list attempt 20:07:05.079 (ports 1): found Ports in classguid_list at index=0 20:07:05.079 (ports 1): port COM8 found from devnode 20:07:05.079 (ports 1): found_usb_device complete 20:07:05.080 (ports 1): usb_add: usb:0/140000/0/8/2 COM8 (Teensy 3.6) Serial 20:07:05.099 (ports 1): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:07:05.100 (ports 1): nothing new, skipping HID & Ports enum 20:07:05.112 (ports 1): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:07:05.113 (ports 1): nothing new, skipping HID & Ports enum 20:07:05.244 (ports 1): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:07:05.245 (ports 1): nothing new, skipping HID & Ports enum 20:07:06.076 (loader): redraw, image 9 20:07:19.198 (ports 1): incoming connection, port 60552 20:07:24.055 (ports 1): got command: "list" 20:07:24.056 (ports 1): nothing new, skipping HID & Ports enum 20:07:30.549 (ports 1): got command: "list" 20:07:30.550 (ports 1): nothing new, skipping HID & Ports enum 20:07:34.512 (ports 1): got command: "list" 20:07:34.513 (ports 1): nothing new, skipping HID & Ports enum 20:07:36.362 (ports 1): got command: "list" 20:07:36.363 (ports 1): nothing new, skipping HID & Ports enum 20:07:49.779 (ports 1): got command: "list" 20:07:49.780 (ports 1): nothing new, skipping HID & Ports enum 20:07:50.233 (serialmon 6): Begin, version=1.42-beta4, high-res time 20:07:50.233 (serialmon 6): listening for location: usb:0/140000/0/8/1 20:07:50.233 (serialmon 6): LoadLibrary cfgmgr32 ok 20:07:50.233 (serialmon 6): LoadLibrary ntdll ok 20:07:50.239 (serialmon 6): callback 0024 20:07:50.239 (serialmon 6): callback 0081 20:07:50.244 (serialmon 6): callback 0083 20:07:50.246 (serialmon 6): hWnd = 2631110 20:07:50.247 (serialmon 6): loop stdin, ready=2097151 20:07:50.249 (serialmon 6): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#2056390#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:07:50.249 (serialmon 6): found_usb_device, loc=usb:0/140000/0/8/2 Port_#0002.Hub_#0005 20:07:50.249 (serialmon 6): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0200 20:07:50.249 (serialmon 6): found_usb_device, devinst=00000002 20:07:50.249 (serialmon 6): add: loc=usb:0/140000/0/8/2, class=Ports, vid=16C0, pid=0483, ver=0200, serial=205, dev=\\?\usb#vid_16c0&pid_0483#2056390#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:07:50.249 (serialmon 6): comport_from_devinst_list attempt 20:07:50.249 (serialmon 6): found Ports in classguid_list at index=0 20:07:50.249 (serialmon 6): port COM8 found from devnode 20:07:50.249 (serialmon 6): found_usb_device complete 20:07:50.249 (serialmon 6): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1113960#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:07:50.249 (serialmon 6): found_usb_device, loc=usb:0/140000/0/8/1 Port_#0001.Hub_#0005 20:07:50.249 (serialmon 6): found_usb_device, devinst=00000007 20:07:50.249 (serialmon 6): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0200 20:07:50.249 (serialmon 6): add: loc=usb:0/140000/0/8/1, class=Ports, vid=16C0, pid=0483, ver=0200, serial=111, dev=\\?\usb#vid_16c0&pid_0483#1113960#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:07:50.249 (serialmon 6): comport_from_devinst_list attempt 20:07:50.249 (serialmon 6): found Ports in classguid_list at index=0 20:07:50.249 (serialmon 6): port COM11 found from devnode 20:07:50.249 (serialmon 6): found_usb_device complete 20:07:50.251 (serialmon 6): usb_add: usb:0/140000/0/8/1 20:07:50.251 (serialmon 6): translate "COM11" -> "\\.\COM11" 20:07:50.288 (serialmon 6): GetDefaultCommConfig success 20:07:50.332 (serialmon 6): SetDefaultCommConfig success 20:07:50.333 (serialmon 6): Opened \\.\COM11 Serial 20:07:50.340 (ports 1): callback 001A 20:07:50.488 (loader): remote connection 1424 opened 20:07:50.497 (serialmon 6): usb_add: usb:0/140000/0/8/2 20:08:03.443 (loader): remote connection 1424 closed 20:08:03.446 (ports 1): got command: "list" 20:08:03.447 (ports 1): nothing new, skipping HID & Ports enum 20:08:56.834 (post_compile 7): Begin, version=1.42-beta4, high-res time 20:08:59.838 (loader): remote connection 1620 opened 20:08:59.838 (loader): remote cmd from 1620: "comment: Teensyduino 1.42-beta4 - WINDOWS (teensy_post_compile)" 20:08:59.838 (loader): remote cmd from 1620: "status" 20:08:59.838 (post_compile 7): Sending command: comment: Teensyduino 1.42-beta4 - WINDOWS (teensy_post_compile) 20:08:59.840 (loader): remote cmd from 1620: "dir:T:\TEMP\arduino_build_680064\" 20:08:59.840 (loader): remote cmd from 1620: "file:MemFault.ino.hex" 20:08:59.840 (post_compile 7): Status: 1, 1, 0, 1, 0, 0, T:\TEMP\arduino_build_466842\, MemFault.ino.hex 20:08:59.840 (post_compile 7): Sending command: dir:T:\TEMP\arduino_build_680064\ 20:08:59.840 (post_compile 7): Sending command: file:MemFault.ino.hex 20:08:59.844 (loader): File "MemFault.ino.hex". 8640 bytes, 1% used 20:08:59.847 (loader): remote cmd from 1620: "status" 20:08:59.849 (post_compile 7): Status: 1, 1, 0, 1, 0, 0, T:\TEMP\arduino_build_680064\, MemFault.ino.hex 20:08:59.849 (post_compile 7): Disconnect 20:08:59.860 (loader): remote connection 1620 closed 20:09:00.155 (ports 1): got command: "list" 20:09:00.156 (ports 1): nothing new, skipping HID & Ports enum 20:09:00.158 (ports 1): got command: "list" 20:09:00.159 (ports 1): nothing new, skipping HID & Ports enum 20:09:00.461 (loader): remote connection 1624 opened 20:09:00.461 (loader): remote cmd from 1624: "comment: Teensyduino 1.42-beta4 - WINDOWS (teensy_post_compile)" 20:09:00.461 (loader): remote cmd from 1624: "status" 20:09:00.461 (loader): remote cmd from 1624: "dir:T:\TEMP\arduino_build_680064\" 20:09:00.461 (loader): remote cmd from 1624: "file:MemFault.ino.hex" 20:09:00.461 (loader): File "MemFault.ino.hex". 8640 bytes, 1% used 20:09:00.463 (post_compile 8): Begin, version=1.42-beta4, high-res time 20:09:00.467 (post_compile 8): Sending command: comment: Teensyduino 1.42-beta4 - WINDOWS (teensy_post_compile) 20:09:00.468 (post_compile 8): Status: 1, 1, 0, 1, 0, 0, T:\TEMP\arduino_build_680064\, MemFault.ino.hex 20:09:00.468 (post_compile 8): Sending command: dir:T:\TEMP\arduino_build_680064\ 20:09:00.468 (post_compile 8): Sending command: file:MemFault.ino.hex 20:09:00.471 (loader): remote cmd from 1624: "status" 20:09:00.475 (post_compile 8): Status: 1, 1, 0, 1, 0, 0, T:\TEMP\arduino_build_680064\, MemFault.ino.hex 20:09:00.475 (post_compile 8): Disconnect 20:09:00.495 (loader): remote connection 1624 closed 20:09:00.495 (loader): remote connection 1548 opened 20:09:00.495 (post_compile 9): Running teensy_reboot: "T:\arduino_1.8.5_142b4\hardware\teensy\..\tools\teensy_reboot.exe" teensy_reboot.exe "-board=TEENSYLC" "-port=usb:0/140000/0/8/1" "-portlabel=COM11 (Teensy) Serial" "-portprotocol=Teensy" 20:09:00.628 (reboot 10): Begin, version=1.42-beta4, high-res time 20:09:00.628 (reboot 10): location = usb:0/140000/0/8/1 20:09:00.628 (reboot 10): portlabel = COM11 (Teensy) Serial 20:09:00.628 (reboot 10): portprotocol = Teensy 20:09:00.628 (reboot 10): Only location usb:0/140000/0/8/1 will be tried 20:09:00.628 (reboot 10): LoadLibrary cfgmgr32 ok 20:09:00.628 (reboot 10): LoadLibrary ntdll ok 20:09:00.630 (reboot 10): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#2056390#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:09:00.630 (reboot 10): found_usb_device, loc=usb:0/140000/0/8/2 Port_#0002.Hub_#0005 20:09:00.630 (reboot 10): found_usb_device, devinst=00000002 20:09:00.630 (reboot 10): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0200 20:09:00.630 (reboot 10): add: loc=usb:0/140000/0/8/2, class=Ports, vid=16C0, pid=0483, ver=0200, serial=205, dev=\\?\usb#vid_16c0&pid_0483#2056390#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:09:00.630 (reboot 10): comport_from_devinst_list attempt 20:09:00.630 (reboot 10): found Ports in classguid_list at index=0 20:09:00.630 (reboot 10): port COM8 found from devnode 20:09:00.630 (reboot 10): found_usb_device complete 20:09:00.630 (reboot 10): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1113960#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:09:00.630 (reboot 10): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0200 20:09:00.630 (reboot 10): found_usb_device, loc=usb:0/140000/0/8/1 Port_#0001.Hub_#0005 20:09:00.630 (reboot 10): found_usb_device, devinst=00000007 20:09:00.630 (reboot 10): add: loc=usb:0/140000/0/8/1, class=Ports, vid=16C0, pid=0483, ver=0200, serial=111, dev=\\?\usb#vid_16c0&pid_0483#1113960#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:09:00.630 (reboot 10): comport_from_devinst_list attempt 20:09:00.630 (reboot 10): found Ports in classguid_list at index=0 20:09:00.630 (reboot 10): port COM11 found from devnode 20:09:00.630 (reboot 10): found_usb_device complete 20:09:00.631 (loader): remote connection 1628 opened 20:09:00.631 (loader): remote cmd from 1628: "show:arduino_attempt_reboot" 20:09:00.631 (loader): got request to show arduino rebooting message 20:09:00.631 (loader): remote cmd from 1628: "comment: Teensyduino 1.42-beta4 - WINDOWS (teensy_reboot)" 20:09:00.631 (loader): remote cmd from 1628: "status" 20:09:00.635 (reboot 10): found Teensy Loader, version 1.42 20:09:00.635 (reboot 10): Sending command: show:arduino_attempt_reboot 20:09:00.638 (reboot 10): Sending command: comment: Teensyduino 1.42-beta4 - WINDOWS (teensy_reboot) 20:09:00.640 (reboot 10): Status: 1, 1, 0, 1, 0, 0, T:\TEMP\arduino_build_680064\, MemFault.ino.hex 20:09:00.640 (reboot 10): do_reset (serial) COM11 20:09:00.641 (loader): remote cmd from 1628: "status" 20:09:00.649 (reboot 10): Status: 1, 1, 0, 1, 0, 0, T:\TEMP\arduino_build_680064\, MemFault.ino.hex 20:09:00.649 (reboot 10): status read, retry 0 20:09:00.726 (ports 1): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:09:00.727 (ports 1): remove: loc=usb:0/140000/0/8/1 20:09:00.727 (ports 1): usb_remove: usb:0/140000/0/8/1 20:09:00.727 (ports 1): nothing new, skipping HID & Ports enum 20:09:00.751 (loader): remote cmd from 1628: "status" 20:09:00.753 (reboot 10): Status: 1, 1, 0, 1, 0, 0, T:\TEMP\arduino_build_680064\, MemFault.ino.hex 20:09:00.753 (reboot 10): status read, retry 1 20:09:00.754 (ports 1): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:09:00.754 (ports 1): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:09:00.755 (ports 1): nothing new, skipping HID & Ports enum 20:09:00.857 (loader): remote cmd from 1628: "status" 20:09:00.858 (reboot 10): Status: 1, 1, 0, 1, 0, 0, T:\TEMP\arduino_build_680064\, MemFault.ino.hex 20:09:00.858 (reboot 10): status read, retry 2 20:09:00.967 (loader): remote cmd from 1628: "status" 20:09:00.969 (reboot 10): Status: 1, 1, 0, 1, 0, 0, T:\TEMP\arduino_build_680064\, MemFault.ino.hex 20:09:00.969 (reboot 10): status read, retry 3 20:09:01.020 (ports 1): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:09:01.021 (ports 1): found_usb_device, id=\\?\usb#vid_16c0&pid_0478#0001b324#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:09:01.021 (ports 1): found_usb_device, loc=usb:0/140000/0/8/1 Port_#0001.Hub_#0005 20:09:01.021 (ports 1): found_usb_device, hwid=USB\VID_16C0&PID_0478&REV_0102 20:09:01.021 (ports 1): found_usb_device, devinst=0000001e 20:09:01.021 (ports 1): add: loc=usb:0/140000/0/8/1, class=HID, vid=16C0, pid=0478, ver=0102, serial=000, dev=\\?\usb#vid_16c0&pid_0478#0001b324#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:09:01.021 (ports 1): hiddev_from_devinst_list: iface=0 20:09:01.022 (ports 1): found_usb_device complete 20:09:01.023 (ports 1): usb_add: usb:0/140000/0/8/1 [no_device] (Teensy) Bootloader 20:09:01.036 (ports 1): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:09:01.037 (ports 1): hid, found devinst=0000001F 20:09:01.037 (ports 1): hid, path=\\?\hid#vid_16c0&pid_0478#7&8c23b88&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 20:09:01.037 (ports 1): hid, opened handle 20:09:01.037 (ports 1): devinst=0000001F, location=usb:0/140000/0/8/1 20:09:01.037 (ports 1): vid=16C0, pid=0478, ver=0102, usepage=FF9C, use=0020 20:09:01.037 (ports 1): devpath=\\?\hid#vid_16c0&pid_0478#7&8c23b88&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 20:09:01.037 (ports 1): usb_add: usb:0/140000/0/8/1 \\?\hid#vid_16c0&pid_0478#7&8c23b88&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} (Teensy LC) Bootloader 20:09:01.046 (loader): Device came online, code_size = 63488 20:09:01.046 (loader): Board is: Teensy LC (MKL26Z64), version 1.02 20:09:01.048 (loader): File "MemFault.ino.hex". 8640 bytes, 14% used 20:09:01.051 (loader): set background IMG_ONLINE 20:09:01.055 (loader): File "MemFault.ino.hex". 8640 bytes, 14% used 20:09:01.058 (loader): elf size appears to be 63488 20:09:01.058 (loader): elf binary data matches hex file 20:09:01.058 (loader): Code size from .elf file = 63488 20:09:01.059 (loader): begin operation 20:09:01.075 (loader): flash, block=0, bs=512, auto=1 20:09:01.080 (loader): remote cmd from 1628: "status" 20:09:01.081 (reboot 10): Status: 1, 1, 1, 2, 0, 1, T:\TEMP\arduino_build_680064\, MemFault.ino.hex 20:09:01.081 (loader): flash, block=1, bs=512, auto=1 20:09:01.084 (loader): flash, block=2, bs=512, auto=1 20:09:01.085 (loader): flash, block=3, bs=512, auto=1 20:09:01.086 (loader): flash, block=4, bs=512, auto=1 20:09:01.087 (loader): flash, block=5, bs=512, auto=1 20:09:01.171 (loader): flash, block=6, bs=512, auto=1 20:09:01.171 (loader): flash, block=7, bs=512, auto=1 20:09:01.171 (loader): flash, block=8, bs=512, auto=1 20:09:01.197 (loader): flash, block=9, bs=512, auto=1 20:09:01.197 (loader): flash, block=10, bs=512, auto=1 20:09:01.197 (loader): flash, block=11, bs=512, auto=1 20:09:01.201 (ports 1): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:09:01.202 (ports 1): nothing new, skipping HID & Ports enum 20:09:01.217 (loader): remote cmd from 1628: "status" 20:09:01.217 (loader): flash, block=12, bs=512, auto=1 20:09:01.217 (loader): flash, block=13, bs=512, auto=1 20:09:01.219 (reboot 10): Status: 1, 1, 1, 2, 0, 1, T:\TEMP\arduino_build_680064\, MemFault.ino.hex 20:09:01.239 (loader): flash, block=14, bs=512, auto=1 20:09:01.240 (loader): flash, block=15, bs=512, auto=1 20:09:01.240 (loader): flash, block=16, bs=512, auto=1 20:09:01.261 (loader): sending reboot 20:09:01.262 (loader): begin wait_until_offline 20:09:01.290 (ports 1): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:09:01.291 (ports 1): remove: loc=usb:0/140000/0/8/1 20:09:01.291 (ports 1): usb_remove: usb:0/140000/0/8/1 20:09:01.291 (ports 1): nothing new, skipping HID & Ports enum 20:09:01.317 (loader): offline, waited 1 20:09:01.317 (loader): end operation, total time = 0.258 seconds 20:09:01.317 (loader): set background IMG_REBOOT_OK 20:09:01.317 (loader): redraw timer set, image 14 to show for 1200 ms 20:09:01.317 (loader): remote cmd from 1628: "status" 20:09:01.322 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:09:01.322 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:09:01.322 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:09:01.322 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:09:01.322 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:09:01.322 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:09:01.322 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:09:01.322 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:09:01.322 (loader): HID/win32: vid:051D pid:0002 ver:0106 20:09:01.323 (reboot 10): Status: 1, 1, 0, 2, 0, 0, T:\TEMP\arduino_build_680064\, MemFault.ino.hex 20:09:01.323 (reboot 10): status read, retry 4 20:09:01.323 (reboot 10): Success 20:09:01.323 (reboot 10): Disconnect 20:09:01.337 (loader): remote connection 1628 closed 20:09:01.337 (loader): remote connection 1548 closed 20:09:01.343 (ports 1): got command: "list" 20:09:01.343 (ports 1): nothing new, skipping HID & Ports enum 20:09:01.344 (ports 1): got command: "list" 20:09:01.345 (ports 1): nothing new, skipping HID & Ports enum 20:09:01.366 (ports 1): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:09:01.367 (ports 1): nothing new, skipping HID & Ports enum 20:09:01.611 (ports 1): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:09:01.612 (ports 1): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1113960#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:09:01.612 (ports 1): found_usb_device, loc=usb:0/140000/0/8/1 Port_#0001.Hub_#0005 20:09:01.612 (ports 1): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0200 20:09:01.612 (ports 1): found_usb_device, devinst=00000007 20:09:01.612 (ports 1): add: loc=usb:0/140000/0/8/1, class=Ports, vid=16C0, pid=0483, ver=0200, serial=111, dev=\\?\usb#vid_16c0&pid_0483#1113960#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:09:01.612 (ports 1): comport_from_devinst_list attempt 20:09:01.612 (ports 1): found Ports in classguid_list at index=0 20:09:01.612 (ports 1): port COM11 found from devnode 20:09:01.612 (ports 1): found_usb_device complete 20:09:01.613 (ports 1): usb_add: usb:0/140000/0/8/1 COM11 (Teensy LC) Serial 20:09:01.637 (ports 1): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:09:01.637 (ports 1): nothing new, skipping HID & Ports enum 20:09:01.661 (ports 1): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:09:01.662 (ports 1): nothing new, skipping HID & Ports enum 20:09:01.728 (serialmon 11): Begin, version=1.42-beta4, high-res time 20:09:01.728 (serialmon 11): listening for location: usb:0/140000/0/8/1 20:09:01.728 (serialmon 11): LoadLibrary cfgmgr32 ok 20:09:01.728 (serialmon 11): LoadLibrary ntdll ok 20:09:01.734 (serialmon 11): callback 0024 20:09:01.734 (serialmon 11): callback 0081 20:09:01.740 (serialmon 11): callback 0083 20:09:01.742 (serialmon 11): hWnd = 1255484 20:09:01.744 (serialmon 11): loop stdin, ready=2097151 20:09:01.745 (serialmon 11): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#2056390#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:09:01.745 (serialmon 11): found_usb_device, loc=usb:0/140000/0/8/2 Port_#0002.Hub_#0005 20:09:01.745 (serialmon 11): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0200 20:09:01.745 (serialmon 11): found_usb_device, devinst=00000002 20:09:01.745 (serialmon 11): add: loc=usb:0/140000/0/8/2, class=Ports, vid=16C0, pid=0483, ver=0200, serial=205, dev=\\?\usb#vid_16c0&pid_0483#2056390#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:09:01.745 (serialmon 11): comport_from_devinst_list attempt 20:09:01.745 (serialmon 11): found Ports in classguid_list at index=0 20:09:01.745 (serialmon 11): port COM8 found from devnode 20:09:01.745 (serialmon 11): found_usb_device complete 20:09:01.745 (serialmon 11): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1113960#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:09:01.745 (serialmon 11): found_usb_device, loc=usb:0/140000/0/8/1 Port_#0001.Hub_#0005 20:09:01.745 (serialmon 11): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0200 20:09:01.745 (serialmon 11): found_usb_device, devinst=00000007 20:09:01.745 (serialmon 11): add: loc=usb:0/140000/0/8/1, class=Ports, vid=16C0, pid=0483, ver=0200, serial=111, dev=\\?\usb#vid_16c0&pid_0483#1113960#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:09:01.745 (serialmon 11): comport_from_devinst_list attempt 20:09:01.745 (serialmon 11): found Ports in classguid_list at index=0 20:09:01.745 (serialmon 11): port COM11 found from devnode 20:09:01.745 (serialmon 11): found_usb_device complete 20:09:01.747 (serialmon 11): usb_add: usb:0/140000/0/8/1 20:09:01.747 (serialmon 11): translate "COM11" -> "\\.\COM11" 20:09:01.774 (ports 1): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:09:01.776 (ports 1): nothing new, skipping HID & Ports enum 20:09:01.799 (serialmon 11): GetDefaultCommConfig success 20:09:01.849 (serialmon 11): SetDefaultCommConfig success 20:09:01.850 (serialmon 11): Opened \\.\COM11 Serial 20:09:01.854 (ports 1): callback 001A 20:09:01.931 (loader): remote connection 1652 opened 20:09:01.938 (serialmon 11): usb_add: usb:0/140000/0/8/2 20:09:02.510 (loader): redraw, image 9 20:09:12.441 (ports 1): got command: "list" 20:09:12.442 (ports 1): nothing new, skipping HID & Ports enum 20:11:17.451 (loader): remote connection 1652 closed 20:11:17.452 (ports 1): got command: "list" 20:11:17.453 (ports 1): nothing new, skipping HID & Ports enum 20:11:19.163 (ports 1): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:11:19.164 (ports 1): remove: loc=usb:0/140000/0/8/1 20:11:19.164 (ports 1): usb_remove: usb:0/140000/0/8/1 20:11:19.164 (ports 1): nothing new, skipping HID & Ports enum 20:11:19.198 (ports 1): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:11:19.199 (ports 1): nothing new, skipping HID & Ports enum 20:11:19.199 (ports 1): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:11:19.200 (ports 1): nothing new, skipping HID & Ports enum 20:11:20.651 (ports 1): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:11:20.652 (ports 1): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1113960#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:11:20.652 (ports 1): found_usb_device, loc=usb:0/140000/0/8/1 Port_#0001.Hub_#0005 20:11:20.652 (ports 1): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0200 20:11:20.652 (ports 1): found_usb_device, devinst=00000007 20:11:20.652 (ports 1): add: loc=usb:0/140000/0/8/1, class=Ports, vid=16C0, pid=0483, ver=0200, serial=111, dev=\\?\usb#vid_16c0&pid_0483#1113960#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:11:20.652 (ports 1): comport_from_devinst_list attempt 20:11:20.652 (ports 1): found Ports in classguid_list at index=0 20:11:20.652 (ports 1): port COM11 found from devnode 20:11:20.652 (ports 1): found_usb_device complete 20:11:20.653 (ports 1): usb_add: usb:0/140000/0/8/1 COM11 (Teensy LC) Serial 20:11:20.681 (ports 1): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:11:20.681 (ports 1): nothing new, skipping HID & Ports enum 20:11:20.687 (ports 1): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:11:20.688 (ports 1): nothing new, skipping HID & Ports enum 20:11:20.861 (ports 1): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:11:20.862 (ports 1): nothing new, skipping HID & Ports enum 20:11:23.040 (loader): file changed 20:11:23.043 (loader): File "MemFault.ino.hex". 8640 bytes, 14% used 20:11:23.806 (post_compile 12): Begin, version=1.42-beta4, high-res time 20:11:26.811 (loader): remote connection 1652 opened 20:11:26.811 (loader): remote cmd from 1652: "comment: Teensyduino 1.42-beta4 - WINDOWS (teensy_post_compile)" 20:11:26.812 (post_compile 12): Sending command: comment: Teensyduino 1.42-beta4 - WINDOWS (teensy_post_compile) 20:11:26.812 (loader): remote cmd from 1652: "status" 20:11:26.813 (loader): remote cmd from 1652: "dir:T:\TEMP\arduino_build_680064\" 20:11:26.813 (loader): remote cmd from 1652: "file:MemFault.ino.hex" 20:11:26.813 (post_compile 12): Status: 1, 1, 0, 2, 0, 0, T:\TEMP\arduino_build_680064\, MemFault.ino.hex 20:11:26.813 (post_compile 12): Sending command: dir:T:\TEMP\arduino_build_680064\ 20:11:26.814 (post_compile 12): Sending command: file:MemFault.ino.hex 20:11:26.816 (loader): File "MemFault.ino.hex". 8640 bytes, 14% used 20:11:26.820 (loader): remote cmd from 1652: "status" 20:11:26.822 (post_compile 12): Status: 1, 1, 0, 2, 0, 0, T:\TEMP\arduino_build_680064\, MemFault.ino.hex 20:11:26.822 (post_compile 12): Disconnect 20:11:26.833 (loader): remote connection 1652 closed 20:11:27.223 (ports 1): got command: "list" 20:11:27.224 (ports 1): nothing new, skipping HID & Ports enum 20:11:27.225 (ports 1): got command: "list" 20:11:27.226 (ports 1): nothing new, skipping HID & Ports enum 20:11:27.489 (post_compile 13): Begin, version=1.42-beta4, high-res time 20:11:27.490 (loader): remote connection 1692 opened 20:11:27.490 (loader): remote cmd from 1692: "comment: Teensyduino 1.42-beta4 - WINDOWS (teensy_post_compile)" 20:11:27.490 (loader): remote cmd from 1692: "status" 20:11:27.490 (loader): remote cmd from 1692: "dir:T:\TEMP\arduino_build_680064\" 20:11:27.490 (loader): remote cmd from 1692: "file:MemFault.ino.hex" 20:11:27.490 (loader): File "MemFault.ino.hex". 8640 bytes, 14% used 20:11:27.492 (post_compile 13): Sending command: comment: Teensyduino 1.42-beta4 - WINDOWS (teensy_post_compile) 20:11:27.494 (post_compile 13): Status: 1, 1, 0, 2, 0, 0, T:\TEMP\arduino_build_680064\, MemFault.ino.hex 20:11:27.494 (post_compile 13): Sending command: dir:T:\TEMP\arduino_build_680064\ 20:11:27.494 (post_compile 13): Sending command: file:MemFault.ino.hex 20:11:27.500 (loader): remote cmd from 1692: "status" 20:11:27.501 (post_compile 13): Status: 1, 1, 0, 2, 0, 0, T:\TEMP\arduino_build_680064\, MemFault.ino.hex 20:11:27.501 (post_compile 13): Disconnect 20:11:27.520 (loader): remote connection 1692 closed 20:11:27.520 (loader): remote connection 1692 opened 20:11:27.520 (post_compile 14): Running teensy_reboot: "T:\arduino_1.8.5_142b4\hardware\teensy\..\tools\teensy_reboot.exe" teensy_reboot.exe "-board=TEENSYLC" "-port=usb:0/140000/0/8/1" "-portlabel=hid#vid_16c0&pid_0478#7... (Teensy LC) Bootloader" "-portprotocol=Teensy" 20:11:27.653 (reboot 15): Begin, version=1.42-beta4, high-res time 20:11:27.653 (reboot 15): location = usb:0/140000/0/8/1 20:11:27.653 (reboot 15): portlabel = hid#vid_16c0&pid_0478#7... (Teensy LC) Bootloader 20:11:27.653 (reboot 15): Only location usb:0/140000/0/8/1 will be tried 20:11:27.653 (reboot 15): portprotocol = Teensy 20:11:27.653 (reboot 15): LoadLibrary cfgmgr32 ok 20:11:27.653 (reboot 15): LoadLibrary ntdll ok 20:11:27.655 (reboot 15): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#2056390#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:11:27.655 (reboot 15): found_usb_device, loc=usb:0/140000/0/8/2 Port_#0002.Hub_#0005 20:11:27.655 (reboot 15): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0200 20:11:27.655 (reboot 15): found_usb_device, devinst=00000002 20:11:27.655 (reboot 15): add: loc=usb:0/140000/0/8/2, class=Ports, vid=16C0, pid=0483, ver=0200, serial=205, dev=\\?\usb#vid_16c0&pid_0483#2056390#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:11:27.655 (reboot 15): comport_from_devinst_list attempt 20:11:27.655 (reboot 15): found Ports in classguid_list at index=0 20:11:27.655 (reboot 15): port COM8 found from devnode 20:11:27.655 (reboot 15): found_usb_device complete 20:11:27.656 (reboot 15): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1113960#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:11:27.656 (reboot 15): found_usb_device, loc=usb:0/140000/0/8/1 Port_#0001.Hub_#0005 20:11:27.656 (reboot 15): found_usb_device, devinst=00000007 20:11:27.656 (reboot 15): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0200 20:11:27.656 (reboot 15): add: loc=usb:0/140000/0/8/1, class=Ports, vid=16C0, pid=0483, ver=0200, serial=111, dev=\\?\usb#vid_16c0&pid_0483#1113960#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:11:27.656 (reboot 15): comport_from_devinst_list attempt 20:11:27.656 (reboot 15): found Ports in classguid_list at index=0 20:11:27.656 (reboot 15): port COM11 found from devnode 20:11:27.656 (reboot 15): found_usb_device complete 20:11:27.660 (loader): remote connection 1300 opened 20:11:27.660 (loader): remote cmd from 1300: "show:arduino_attempt_reboot" 20:11:27.660 (loader): got request to show arduino rebooting message 20:11:27.660 (loader): remote cmd from 1300: "comment: Teensyduino 1.42-beta4 - WINDOWS (teensy_reboot)" 20:11:27.660 (loader): remote cmd from 1300: "status" 20:11:27.660 (reboot 15): found Teensy Loader, version 1.42 20:11:27.660 (reboot 15): Sending command: show:arduino_attempt_reboot 20:11:27.663 (reboot 15): Sending command: comment: Teensyduino 1.42-beta4 - WINDOWS (teensy_reboot) 20:11:27.664 (reboot 15): Status: 1, 1, 0, 2, 0, 0, T:\TEMP\arduino_build_680064\, MemFault.ino.hex 20:11:27.664 (reboot 15): do_reset (serial) COM11 20:11:27.670 (loader): remote cmd from 1300: "status" 20:11:27.674 (reboot 15): Status: 1, 1, 0, 2, 0, 0, T:\TEMP\arduino_build_680064\, MemFault.ino.hex 20:11:27.674 (reboot 15): status read, retry 0 20:11:27.758 (ports 1): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:11:27.759 (ports 1): remove: loc=usb:0/140000/0/8/1 20:11:27.759 (ports 1): usb_remove: usb:0/140000/0/8/1 20:11:27.759 (ports 1): nothing new, skipping HID & Ports enum 20:11:27.780 (loader): remote cmd from 1300: "status" 20:11:27.782 (reboot 15): Status: 1, 1, 0, 2, 0, 0, T:\TEMP\arduino_build_680064\, MemFault.ino.hex 20:11:27.782 (reboot 15): status read, retry 1 20:11:27.788 (ports 1): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:11:27.789 (ports 1): nothing new, skipping HID & Ports enum 20:11:27.800 (ports 1): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:11:27.800 (ports 1): nothing new, skipping HID & Ports enum 20:11:27.888 (loader): remote cmd from 1300: "status" 20:11:27.890 (reboot 15): Status: 1, 1, 0, 2, 0, 0, T:\TEMP\arduino_build_680064\, MemFault.ino.hex 20:11:27.890 (reboot 15): status read, retry 2 20:11:27.994 (loader): remote cmd from 1300: "status" 20:11:27.995 (reboot 15): Status: 1, 1, 0, 2, 0, 0, T:\TEMP\arduino_build_680064\, MemFault.ino.hex 20:11:27.995 (reboot 15): status read, retry 3 20:11:28.057 (ports 1): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:11:28.058 (ports 1): found_usb_device, id=\\?\usb#vid_16c0&pid_0478#0001b324#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:11:28.058 (ports 1): found_usb_device, hwid=USB\VID_16C0&PID_0478&REV_0102 20:11:28.058 (ports 1): found_usb_device, loc=usb:0/140000/0/8/1 Port_#0001.Hub_#0005 20:11:28.058 (ports 1): found_usb_device, devinst=0000001e 20:11:28.058 (ports 1): add: loc=usb:0/140000/0/8/1, class=HID, vid=16C0, pid=0478, ver=0102, serial=000, dev=\\?\usb#vid_16c0&pid_0478#0001b324#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:11:28.058 (ports 1): hiddev_from_devinst_list: iface=0 20:11:28.059 (ports 1): found_usb_device complete 20:11:28.060 (ports 1): usb_add: usb:0/140000/0/8/1 [no_device] (Teensy LC) Bootloader 20:11:28.080 (ports 1): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:11:28.082 (ports 1): hid, found devinst=0000001F 20:11:28.082 (ports 1): hid, path=\\?\hid#vid_16c0&pid_0478#7&8c23b88&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 20:11:28.082 (ports 1): hid, opened handle 20:11:28.082 (ports 1): devinst=0000001F, location=usb:0/140000/0/8/1 20:11:28.082 (ports 1): vid=16C0, pid=0478, ver=0102, usepage=FF9C, use=0020 20:11:28.082 (ports 1): devpath=\\?\hid#vid_16c0&pid_0478#7&8c23b88&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 20:11:28.082 (ports 1): usb_add: usb:0/140000/0/8/1 \\?\hid#vid_16c0&pid_0478#7&8c23b88&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} (Teensy LC) Bootloader 20:11:28.104 (loader): remote cmd from 1300: "status" 20:11:28.104 (loader): Device came online, code_size = 63488 20:11:28.104 (loader): Board is: Teensy LC (MKL26Z64), version 1.02 20:11:28.104 (loader): File "MemFault.ino.hex". 8640 bytes, 14% used 20:11:28.104 (loader): set background IMG_ONLINE 20:11:28.114 (loader): File "MemFault.ino.hex". 8640 bytes, 14% used 20:11:28.114 (loader): elf size appears to be 63488 20:11:28.114 (loader): elf binary data matches hex file 20:11:28.114 (loader): Code size from .elf file = 63488 20:11:28.114 (loader): begin operation 20:11:28.134 (reboot 15): Status: 1, 1, 1, 3, 0, 1, T:\TEMP\arduino_build_680064\, MemFault.ino.hex 20:11:28.136 (loader): flash, block=0, bs=512, auto=1 20:11:28.136 (loader): flash, block=1, bs=512, auto=1 20:11:28.146 (loader): flash, block=2, bs=512, auto=1 20:11:28.146 (loader): flash, block=3, bs=512, auto=1 20:11:28.146 (loader): flash, block=4, bs=512, auto=1 20:11:28.146 (loader): flash, block=5, bs=512, auto=1 20:11:28.235 (loader): flash, block=6, bs=512, auto=1 20:11:28.237 (loader): flash, block=7, bs=512, auto=1 20:11:28.237 (loader): flash, block=8, bs=512, auto=1 20:11:28.256 (loader): flash, block=9, bs=512, auto=1 20:11:28.258 (loader): flash, block=10, bs=512, auto=1 20:11:28.276 (loader): flash, block=11, bs=512, auto=1 20:11:28.277 (ports 1): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:11:28.278 (loader): remote cmd from 1300: "status" 20:11:28.278 (loader): flash, block=12, bs=512, auto=1 20:11:28.278 (loader): flash, block=13, bs=512, auto=1 20:11:28.279 (ports 1): nothing new, skipping HID & Ports enum 20:11:28.279 (reboot 15): Status: 1, 1, 1, 3, 0, 1, T:\TEMP\arduino_build_680064\, MemFault.ino.hex 20:11:28.296 (loader): flash, block=14, bs=512, auto=1 20:11:28.296 (loader): flash, block=15, bs=512, auto=1 20:11:28.324 (loader): flash, block=16, bs=512, auto=1 20:11:28.329 (loader): sending reboot 20:11:28.329 (loader): begin wait_until_offline 20:11:28.354 (ports 1): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:11:28.355 (ports 1): remove: loc=usb:0/140000/0/8/1 20:11:28.355 (ports 1): usb_remove: usb:0/140000/0/8/1 20:11:28.355 (ports 1): nothing new, skipping HID & Ports enum 20:11:28.385 (loader): offline, waited 1 20:11:28.385 (loader): end operation, total time = 0.270 seconds 20:11:28.385 (loader): set background IMG_REBOOT_OK 20:11:28.385 (loader): redraw timer set, image 14 to show for 1200 ms 20:11:28.385 (loader): remote cmd from 1300: "status" 20:11:28.385 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:11:28.385 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:11:28.385 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:11:28.385 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:11:28.385 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:11:28.385 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:11:28.385 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:11:28.385 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:11:28.385 (loader): HID/win32: vid:051D pid:0002 ver:0106 20:11:28.392 (reboot 15): Status: 1, 1, 0, 3, 0, 0, T:\TEMP\arduino_build_680064\, MemFault.ino.hex 20:11:28.392 (reboot 15): status read, retry 4 20:11:28.392 (reboot 15): Success 20:11:28.392 (reboot 15): Disconnect 20:11:28.403 (ports 1): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:11:28.404 (ports 1): nothing new, skipping HID & Ports enum 20:11:28.407 (loader): remote connection 1300 closed 20:11:28.407 (loader): remote connection 1692 closed 20:11:28.412 (ports 1): got command: "list" 20:11:28.413 (ports 1): nothing new, skipping HID & Ports enum 20:11:28.415 (ports 1): got command: "list" 20:11:28.415 (ports 1): nothing new, skipping HID & Ports enum 20:11:28.674 (ports 1): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:11:28.675 (ports 1): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1113960#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:11:28.675 (ports 1): found_usb_device, loc=usb:0/140000/0/8/1 Port_#0001.Hub_#0005 20:11:28.675 (ports 1): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0200 20:11:28.675 (ports 1): found_usb_device, devinst=00000007 20:11:28.675 (ports 1): add: loc=usb:0/140000/0/8/1, class=Ports, vid=16C0, pid=0483, ver=0200, serial=111, dev=\\?\usb#vid_16c0&pid_0483#1113960#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:11:28.676 (ports 1): comport_from_devinst_list attempt 20:11:28.676 (ports 1): found Ports in classguid_list at index=0 20:11:28.676 (ports 1): port COM11 found from devnode 20:11:28.676 (ports 1): found_usb_device complete 20:11:28.676 (ports 1): usb_add: usb:0/140000/0/8/1 COM11 (Teensy LC) Serial 20:11:28.697 (ports 1): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:11:28.698 (ports 1): nothing new, skipping HID & Ports enum 20:11:28.710 (ports 1): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:11:28.711 (ports 1): nothing new, skipping HID & Ports enum 20:11:28.762 (serialmon 16): Begin, version=1.42-beta4, high-res time 20:11:28.762 (serialmon 16): listening for location: usb:0/140000/0/8/1 20:11:28.762 (serialmon 16): LoadLibrary cfgmgr32 ok 20:11:28.762 (serialmon 16): LoadLibrary ntdll ok 20:11:28.769 (serialmon 16): callback 0024 20:11:28.769 (serialmon 16): callback 0081 20:11:28.773 (serialmon 16): callback 0083 20:11:28.776 (serialmon 16): hWnd = 1321010 20:11:28.776 (serialmon 16): loop stdin, ready=2097151 20:11:28.779 (serialmon 16): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#2056390#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:11:28.779 (serialmon 16): found_usb_device, loc=usb:0/140000/0/8/2 Port_#0002.Hub_#0005 20:11:28.779 (serialmon 16): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0200 20:11:28.779 (serialmon 16): found_usb_device, devinst=00000002 20:11:28.779 (serialmon 16): add: loc=usb:0/140000/0/8/2, class=Ports, vid=16C0, pid=0483, ver=0200, serial=205, dev=\\?\usb#vid_16c0&pid_0483#2056390#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:11:28.779 (serialmon 16): comport_from_devinst_list attempt 20:11:28.779 (serialmon 16): found Ports in classguid_list at index=0 20:11:28.779 (serialmon 16): port COM8 found from devnode 20:11:28.779 (serialmon 16): found_usb_device complete 20:11:28.780 (serialmon 16): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1113960#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:11:28.780 (serialmon 16): found_usb_device, loc=usb:0/140000/0/8/1 Port_#0001.Hub_#0005 20:11:28.780 (serialmon 16): found_usb_device, devinst=00000007 20:11:28.780 (serialmon 16): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0200 20:11:28.780 (serialmon 16): add: loc=usb:0/140000/0/8/1, class=Ports, vid=16C0, pid=0483, ver=0200, serial=111, dev=\\?\usb#vid_16c0&pid_0483#1113960#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:11:28.780 (serialmon 16): comport_from_devinst_list attempt 20:11:28.780 (serialmon 16): found Ports in classguid_list at index=0 20:11:28.780 (serialmon 16): port COM11 found from devnode 20:11:28.780 (serialmon 16): found_usb_device complete 20:11:28.781 (serialmon 16): usb_add: usb:0/140000/0/8/1 20:11:28.781 (serialmon 16): translate "COM11" -> "\\.\COM11" 20:11:28.827 (serialmon 16): GetDefaultCommConfig success 20:11:28.833 (ports 1): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:11:28.835 (ports 1): nothing new, skipping HID & Ports enum 20:11:28.875 (serialmon 16): SetDefaultCommConfig success 20:11:28.875 (serialmon 16): Opened \\.\COM11 Serial 20:11:28.880 (ports 1): callback 001A 20:11:28.978 (loader): remote connection 1720 opened 20:11:28.982 (serialmon 16): usb_add: usb:0/140000/0/8/2 20:11:29.594 (loader): redraw, image 9 20:12:37.975 (loader): Verbose Info event 20:12:45.636 (loader): remote connection 1720 closed 20:12:50.703 (ports 1): got command: "list" 20:12:50.705 (ports 1): nothing new, skipping HID & Ports enum 20:12:52.241 (ports 1): got command: "list" 20:12:52.243 (ports 1): nothing new, skipping HID & Ports enum 20:12:56.040 (loader): file changed 20:12:56.049 (loader): File "MemFault.ino.hex". 8640 bytes, 14% used 20:12:56.773 (post_compile 17): Begin, version=1.42-beta4, high-res time 20:12:59.779 (loader): remote connection 1660 opened 20:12:59.786 (loader): remote cmd from 1660: "comment: Teensyduino 1.42-beta4 - WINDOWS (teensy_post_compile)" 20:12:59.786 (post_compile 17): Sending command: comment: Teensyduino 1.42-beta4 - WINDOWS (teensy_post_compile) 20:12:59.792 (loader): remote cmd from 1660: "status" 20:12:59.800 (post_compile 17): Status: 1, 1, 0, 3, 0, 0, T:\TEMP\arduino_build_680064\, MemFault.ino.hex 20:12:59.800 (post_compile 17): Sending command: dir:T:\TEMP\arduino_build_680064\ 20:12:59.800 (loader): remote cmd from 1660: "dir:T:\TEMP\arduino_build_680064\" 20:12:59.805 (loader): remote cmd from 1660: "file:MemFault.ino.hex" 20:12:59.805 (post_compile 17): Sending command: file:MemFault.ino.hex 20:12:59.814 (loader): File "MemFault.ino.hex". 8640 bytes, 14% used 20:12:59.823 (loader): remote cmd from 1660: "status" 20:12:59.830 (post_compile 17): Status: 1, 1, 0, 3, 0, 0, T:\TEMP\arduino_build_680064\, MemFault.ino.hex 20:12:59.830 (post_compile 17): Disconnect 20:12:59.854 (loader): remote connection 1660 closed 20:13:00.120 (ports 1): got command: "list" 20:13:00.121 (ports 1): nothing new, skipping HID & Ports enum 20:13:00.121 (ports 1): got command: "list" 20:13:00.122 (ports 1): nothing new, skipping HID & Ports enum 20:13:00.403 (loader): remote connection 1724 opened 20:13:00.409 (post_compile 18): Begin, version=1.42-beta4, high-res time 20:13:00.418 (loader): remote cmd from 1724: "comment: Teensyduino 1.42-beta4 - WINDOWS (teensy_post_compile)" 20:13:00.419 (post_compile 18): Sending command: comment: Teensyduino 1.42-beta4 - WINDOWS (teensy_post_compile) 20:13:00.424 (loader): remote cmd from 1724: "status" 20:13:00.432 (loader): remote cmd from 1724: "dir:T:\TEMP\arduino_build_680064\" 20:13:00.432 (post_compile 18): Status: 1, 1, 0, 3, 0, 0, T:\TEMP\arduino_build_680064\, MemFault.ino.hex 20:13:00.432 (post_compile 18): Sending command: dir:T:\TEMP\arduino_build_680064\ 20:13:00.433 (loader): remote cmd from 1724: "file:MemFault.ino.hex" 20:13:00.438 (post_compile 18): Sending command: file:MemFault.ino.hex 20:13:00.443 (loader): File "MemFault.ino.hex". 8640 bytes, 14% used 20:13:00.453 (loader): remote cmd from 1724: "status" 20:13:00.462 (post_compile 18): Status: 1, 1, 0, 3, 0, 0, T:\TEMP\arduino_build_680064\, MemFault.ino.hex 20:13:00.462 (post_compile 18): Disconnect 20:13:00.473 (post_compile 19): Running teensy_reboot: "T:\arduino_1.8.5_142b4\hardware\teensy\..\tools\teensy_reboot.exe" teensy_reboot.exe "-board=TEENSYLC" "-port=usb:0/140000/0/8/1" "-portlabel=hid#vid_16c0&pid_0478#7... (Teensy LC) Bootloader" "-portprotocol=Teensy" 20:13:00.483 (loader): remote connection 1724 closed 20:13:00.495 (loader): remote connection 1724 opened 20:13:00.854 (reboot 20): Begin, version=1.42-beta4, high-res time 20:13:00.854 (reboot 20): location = usb:0/140000/0/8/1 20:13:00.854 (reboot 20): portlabel = hid#vid_16c0&pid_0478#7... (Teensy LC) Bootloader 20:13:00.854 (reboot 20): portprotocol = Teensy 20:13:00.854 (reboot 20): Only location usb:0/140000/0/8/1 will be tried 20:13:00.854 (reboot 20): LoadLibrary cfgmgr32 ok 20:13:00.854 (reboot 20): LoadLibrary ntdll ok 20:13:00.856 (reboot 20): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#2056390#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:13:00.856 (reboot 20): found_usb_device, loc=usb:0/140000/0/8/2 Port_#0002.Hub_#0005 20:13:00.856 (reboot 20): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0200 20:13:00.856 (reboot 20): found_usb_device, devinst=00000002 20:13:00.856 (reboot 20): add: loc=usb:0/140000/0/8/2, class=Ports, vid=16C0, pid=0483, ver=0200, serial=205, dev=\\?\usb#vid_16c0&pid_0483#2056390#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:13:00.856 (reboot 20): comport_from_devinst_list attempt 20:13:00.856 (reboot 20): found Ports in classguid_list at index=0 20:13:00.856 (reboot 20): port COM8 found from devnode 20:13:00.856 (reboot 20): found_usb_device complete 20:13:00.856 (reboot 20): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1113960#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:13:00.856 (reboot 20): found_usb_device, loc=usb:0/140000/0/8/1 Port_#0001.Hub_#0005 20:13:00.856 (reboot 20): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0200 20:13:00.856 (reboot 20): found_usb_device, devinst=00000007 20:13:00.856 (reboot 20): add: loc=usb:0/140000/0/8/1, class=Ports, vid=16C0, pid=0483, ver=0200, serial=111, dev=\\?\usb#vid_16c0&pid_0483#1113960#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:13:00.856 (reboot 20): comport_from_devinst_list attempt 20:13:00.856 (reboot 20): found Ports in classguid_list at index=0 20:13:00.856 (reboot 20): port COM11 found from devnode 20:13:00.856 (reboot 20): found_usb_device complete 20:13:00.860 (loader): remote connection 1564 opened 20:13:00.866 (reboot 20): found Teensy Loader, version 1.42 20:13:00.866 (reboot 20): Sending command: show:arduino_attempt_reboot 20:13:00.866 (loader): remote cmd from 1564: "show:arduino_attempt_reboot" 20:13:00.867 (loader): got request to show arduino rebooting message 20:13:00.877 (loader): remote cmd from 1564: "comment: Teensyduino 1.42-beta4 - WINDOWS (teensy_reboot)" 20:13:00.877 (loader): remote cmd from 1564: "status" 20:13:00.881 (reboot 20): Sending command: comment: Teensyduino 1.42-beta4 - WINDOWS (teensy_reboot) 20:13:00.894 (reboot 20): Status: 1, 1, 0, 3, 0, 0, T:\TEMP\arduino_build_680064\, MemFault.ino.hex 20:13:00.894 (reboot 20): do_reset (serial) COM11 20:13:00.901 (loader): remote cmd from 1564: "status" 20:13:00.909 (reboot 20): Status: 1, 1, 0, 3, 0, 0, T:\TEMP\arduino_build_680064\, MemFault.ino.hex 20:13:00.909 (reboot 20): status read, retry 0 20:13:00.982 (ports 1): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:13:00.983 (ports 1): remove: loc=usb:0/140000/0/8/1 20:13:00.983 (ports 1): usb_remove: usb:0/140000/0/8/1 20:13:00.983 (ports 1): nothing new, skipping HID & Ports enum 20:13:01.046 (loader): remote cmd from 1564: "status" 20:13:01.065 (reboot 20): Status: 1, 1, 0, 3, 0, 0, T:\TEMP\arduino_build_680064\, MemFault.ino.hex 20:13:01.065 (reboot 20): status read, retry 1 20:13:01.068 (ports 1): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:13:01.069 (ports 1): nothing new, skipping HID & Ports enum 20:13:01.069 (ports 1): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:13:01.070 (ports 1): nothing new, skipping HID & Ports enum 20:13:01.175 (loader): remote cmd from 1564: "status" 20:13:01.193 (reboot 20): Status: 1, 1, 0, 3, 0, 0, T:\TEMP\arduino_build_680064\, MemFault.ino.hex 20:13:01.193 (reboot 20): status read, retry 2 20:13:01.279 (ports 1): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:13:01.280 (ports 1): found_usb_device, id=\\?\usb#vid_16c0&pid_0478#0001b324#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:13:01.280 (ports 1): found_usb_device, loc=usb:0/140000/0/8/1 Port_#0001.Hub_#0005 20:13:01.280 (ports 1): found_usb_device, hwid=USB\VID_16C0&PID_0478&REV_0102 20:13:01.280 (ports 1): found_usb_device, devinst=0000001e 20:13:01.280 (ports 1): add: loc=usb:0/140000/0/8/1, class=HID, vid=16C0, pid=0478, ver=0102, serial=000, dev=\\?\usb#vid_16c0&pid_0478#0001b324#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:13:01.280 (ports 1): hiddev_from_devinst_list: iface=0 20:13:01.281 (ports 1): found_usb_device complete 20:13:01.282 (ports 1): hid, found devinst=0000001F 20:13:01.282 (ports 1): hid, path=\\?\hid#vid_16c0&pid_0478#7&8c23b88&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 20:13:01.282 (ports 1): hid, opened handle 20:13:01.282 (ports 1): devinst=0000001F, location=usb:0/140000/0/8/1 20:13:01.282 (ports 1): vid=16C0, pid=0478, ver=0102, usepage=FF9C, use=0020 20:13:01.282 (ports 1): devpath=\\?\hid#vid_16c0&pid_0478#7&8c23b88&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 20:13:01.282 (ports 1): usb_add: usb:0/140000/0/8/1 \\?\hid#vid_16c0&pid_0478#7&8c23b88&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} (Teensy LC) Bootloader 20:13:01.406 (loader): remote cmd from 1564: "status" 20:13:01.418 (loader): Device came online, code_size = 63488 20:13:01.418 (loader): Board is: Teensy LC (MKL26Z64), version 1.02 20:13:01.428 (loader): File "MemFault.ino.hex". 8640 bytes, 14% used 20:13:01.436 (loader): set background IMG_ONLINE 20:13:01.446 (loader): File "MemFault.ino.hex". 8640 bytes, 14% used 20:13:01.446 (loader): elf size appears to be 63488 20:13:01.456 (loader): elf binary data matches hex file 20:13:01.456 (loader): Code size from .elf file = 63488 20:13:01.466 (loader): begin operation 20:13:01.487 (reboot 20): Status: 1, 1, 1, 4, 0, 1, T:\TEMP\arduino_build_680064\, MemFault.ino.hex 20:13:01.492 (ports 1): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:13:01.493 (ports 1): nothing new, skipping HID & Ports enum 20:13:01.516 (loader): flash, block=0, bs=512, auto=1 20:13:01.526 (loader): flash, block=1, bs=512, auto=1 20:13:01.536 (loader): flash, block=2, bs=512, auto=1 20:13:01.546 (loader): remote cmd from 1564: "status" 20:13:01.556 (loader): flash, block=3, bs=512, auto=1 20:13:01.556 (reboot 20): Status: 1, 1, 1, 4, 0, 1, T:\TEMP\arduino_build_680064\, MemFault.ino.hex 20:13:01.559 (loader): flash, block=4, bs=512, auto=1 20:13:01.566 (loader): flash, block=5, bs=512, auto=1 20:13:01.636 (loader): flash, block=6, bs=512, auto=1 20:13:01.638 (loader): flash, block=7, bs=512, auto=1 20:13:01.648 (loader): flash, block=8, bs=512, auto=1 20:13:01.656 (loader): flash, block=9, bs=512, auto=1 20:13:01.656 (loader): flash, block=10, bs=512, auto=1 20:13:01.666 (loader): flash, block=11, bs=512, auto=1 20:13:01.676 (loader): flash, block=12, bs=512, auto=1 20:13:01.676 (loader): flash, block=13, bs=512, auto=1 20:13:01.686 (loader): flash, block=14, bs=512, auto=1 20:13:01.696 (loader): flash, block=15, bs=512, auto=1 20:13:01.699 (loader): flash, block=16, bs=512, auto=1 20:13:01.706 (loader): sending reboot 20:13:01.716 (loader): begin wait_until_offline 20:13:01.745 (ports 1): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:13:01.746 (ports 1): remove: loc=usb:0/140000/0/8/1 20:13:01.746 (ports 1): usb_remove: usb:0/140000/0/8/1 20:13:01.746 (ports 1): nothing new, skipping HID & Ports enum 20:13:01.786 (loader): offline, waited 1 20:13:01.786 (loader): end operation, total time = 0.310 seconds 20:13:01.799 (loader): set background IMG_REBOOT_OK 20:13:01.806 (loader): redraw timer set, image 14 to show for 1200 ms 20:13:01.809 (loader): remote cmd from 1564: "status" 20:13:01.816 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:13:01.816 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:13:01.831 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:13:01.836 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:13:01.836 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:13:01.846 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:13:01.846 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:13:01.856 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:13:01.866 (loader): HID/win32: vid:051D pid:0002 ver:0106 20:13:01.873 (reboot 20): Status: 1, 1, 0, 4, 0, 0, T:\TEMP\arduino_build_680064\, MemFault.ino.hex 20:13:01.873 (reboot 20): status read, retry 3 20:13:01.873 (reboot 20): Success 20:13:01.873 (reboot 20): Disconnect 20:13:01.891 (ports 1): got command: "list" 20:13:01.892 (ports 1): nothing new, skipping HID & Ports enum 20:13:01.894 (ports 1): got command: "list" 20:13:01.895 (ports 1): nothing new, skipping HID & Ports enum 20:13:01.906 (loader): remote connection 1564 closed 20:13:01.916 (loader): remote connection 1724 closed 20:13:01.957 (ports 1): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:13:01.957 (ports 1): nothing new, skipping HID & Ports enum 20:13:02.063 (ports 1): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:13:02.064 (ports 1): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1113960#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:13:02.064 (ports 1): found_usb_device, loc=usb:0/140000/0/8/1 Port_#0001.Hub_#0005 20:13:02.064 (ports 1): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0200 20:13:02.064 (ports 1): found_usb_device, devinst=00000007 20:13:02.064 (ports 1): add: loc=usb:0/140000/0/8/1, class=Ports, vid=16C0, pid=0483, ver=0200, serial=111, dev=\\?\usb#vid_16c0&pid_0483#1113960#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:13:02.064 (ports 1): comport_from_devinst_list attempt 20:13:02.064 (ports 1): found Ports in classguid_list at index=0 20:13:02.064 (ports 1): port COM11 found from devnode 20:13:02.064 (ports 1): found_usb_device complete 20:13:02.065 (ports 1): usb_add: usb:0/140000/0/8/1 COM11 (Teensy LC) Serial 20:13:02.147 (ports 1): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:13:02.147 (ports 1): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:13:02.148 (ports 1): nothing new, skipping HID & Ports enum 20:13:02.281 (serialmon 21): Begin, version=1.42-beta4, high-res time 20:13:02.281 (serialmon 21): listening for location: usb:0/140000/0/8/1 20:13:02.281 (serialmon 21): LoadLibrary cfgmgr32 ok 20:13:02.281 (serialmon 21): LoadLibrary ntdll ok 20:13:02.288 (serialmon 21): callback 0024 20:13:02.288 (serialmon 21): callback 0081 20:13:02.294 (serialmon 21): callback 0083 20:13:02.296 (serialmon 21): hWnd = 1452082 20:13:02.298 (serialmon 21): loop stdin, ready=2097151 20:13:02.300 (serialmon 21): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#2056390#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:13:02.300 (serialmon 21): found_usb_device, loc=usb:0/140000/0/8/2 Port_#0002.Hub_#0005 20:13:02.300 (serialmon 21): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0200 20:13:02.300 (serialmon 21): found_usb_device, devinst=00000002 20:13:02.300 (serialmon 21): add: loc=usb:0/140000/0/8/2, class=Ports, vid=16C0, pid=0483, ver=0200, serial=205, dev=\\?\usb#vid_16c0&pid_0483#2056390#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:13:02.300 (serialmon 21): comport_from_devinst_list attempt 20:13:02.300 (serialmon 21): found Ports in classguid_list at index=0 20:13:02.300 (serialmon 21): port COM8 found from devnode 20:13:02.300 (serialmon 21): found_usb_device complete 20:13:02.301 (serialmon 21): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1113960#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:13:02.301 (serialmon 21): found_usb_device, loc=usb:0/140000/0/8/1 Port_#0001.Hub_#0005 20:13:02.301 (serialmon 21): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0200 20:13:02.301 (serialmon 21): found_usb_device, devinst=00000007 20:13:02.301 (serialmon 21): add: loc=usb:0/140000/0/8/1, class=Ports, vid=16C0, pid=0483, ver=0200, serial=111, dev=\\?\usb#vid_16c0&pid_0483#1113960#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:13:02.301 (serialmon 21): comport_from_devinst_list attempt 20:13:02.301 (serialmon 21): found Ports in classguid_list at index=0 20:13:02.301 (serialmon 21): port COM11 found from devnode 20:13:02.301 (serialmon 21): found_usb_device complete 20:13:02.302 (serialmon 21): usb_add: usb:0/140000/0/8/1 20:13:02.302 (serialmon 21): translate "COM11" -> "\\.\COM11" 20:13:02.339 (serialmon 21): GetDefaultCommConfig success 20:13:02.386 (serialmon 21): SetDefaultCommConfig success 20:13:02.386 (serialmon 21): Opened \\.\COM11 Serial 20:13:02.391 (ports 1): callback 001A 20:13:02.486 (loader): remote connection 1680 opened 20:13:02.516 (serialmon 21): usb_add: usb:0/140000/0/8/2 20:13:02.517 (serialmon 21): callback 001A 20:13:02.714 (serialmon 21): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:13:02.716 (serialmon 21): nothing new, skipping HID & Ports enum 20:13:02.770 (ports 1): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:13:02.771 (ports 1): nothing new, skipping HID & Ports enum 20:13:03.016 (loader): redraw, image 9 20:14:53.150 (ports 1): got command: "list" 20:14:53.151 (ports 1): nothing new, skipping HID & Ports enum 20:14:55.089 (ports 1): got command: "list" 20:14:55.090 (ports 1): nothing new, skipping HID & Ports enum 20:14:59.499 (post_compile 22): Begin, version=1.42-beta4, high-res time 20:15:02.503 (loader): remote connection 1800 opened 20:15:02.509 (loader): remote cmd from 1800: "comment: Teensyduino 1.42-beta4 - WINDOWS (teensy_post_compile)" 20:15:02.509 (post_compile 22): Sending command: comment: Teensyduino 1.42-beta4 - WINDOWS (teensy_post_compile) 20:15:02.515 (loader): remote cmd from 1800: "status" 20:15:02.522 (loader): remote cmd from 1800: "dir:T:\TEMP\arduino_build_466842\" 20:15:02.523 (post_compile 22): Status: 1, 1, 0, 4, 0, 0, T:\TEMP\arduino_build_680064\, MemFault.ino.hex 20:15:02.523 (post_compile 22): Sending command: dir:T:\TEMP\arduino_build_466842\ 20:15:02.528 (post_compile 22): Sending command: file:MemFault.ino.hex 20:15:02.528 (loader): remote cmd from 1800: "file:MemFault.ino.hex" 20:15:02.536 (loader): File "MemFault.ino.hex". 15004 bytes, 24% used 20:15:02.547 (loader): remote cmd from 1800: "status" 20:15:02.556 (post_compile 22): Status: 1, 1, 0, 4, 0, 0, T:\TEMP\arduino_build_466842\, MemFault.ino.hex 20:15:02.556 (post_compile 22): Disconnect 20:15:02.587 (loader): remote connection 1800 closed 20:15:02.845 (ports 1): got command: "list" 20:15:02.846 (ports 1): nothing new, skipping HID & Ports enum 20:15:02.847 (ports 1): got command: "list" 20:15:02.848 (ports 1): nothing new, skipping HID & Ports enum 20:15:03.132 (loader): remote connection 1748 opened 20:15:03.138 (post_compile 23): Begin, version=1.42-beta4, high-res time 20:15:03.142 (loader): remote cmd from 1748: "comment: Teensyduino 1.42-beta4 - WINDOWS (teensy_post_compile)" 20:15:03.147 (post_compile 23): Sending command: comment: Teensyduino 1.42-beta4 - WINDOWS (teensy_post_compile) 20:15:03.152 (loader): remote cmd from 1748: "status" 20:15:03.152 (loader): remote cmd from 1748: "dir:T:\TEMP\arduino_build_466842\" 20:15:03.161 (post_compile 23): Status: 1, 1, 0, 4, 0, 0, T:\TEMP\arduino_build_466842\, MemFault.ino.hex 20:15:03.161 (post_compile 23): Sending command: dir:T:\TEMP\arduino_build_466842\ 20:15:03.162 (loader): remote cmd from 1748: "file:MemFault.ino.hex" 20:15:03.167 (post_compile 23): Sending command: file:MemFault.ino.hex 20:15:03.172 (loader): File "MemFault.ino.hex". 15004 bytes, 24% used 20:15:03.182 (loader): remote cmd from 1748: "status" 20:15:03.196 (post_compile 23): Status: 1, 1, 0, 4, 0, 0, T:\TEMP\arduino_build_466842\, MemFault.ino.hex 20:15:03.196 (post_compile 23): Disconnect 20:15:03.212 (post_compile 24): Running teensy_reboot: "T:\arduino_1.8.5_142b4\hardware\teensy\..\tools\teensy_reboot.exe" teensy_reboot.exe "-board=TEENSY36" "-port=COM8" "-portlabel=COM8 (Teensy)" "-portprotocol=serial" 20:15:03.222 (loader): remote connection 1748 closed 20:15:03.242 (loader): remote connection 1748 opened 20:15:03.397 (reboot 25): Begin, version=1.42-beta4, high-res time 20:15:03.397 (reboot 25): location = COM8 20:15:03.397 (reboot 25): portlabel = COM8 (Teensy) 20:15:03.397 (reboot 25): portprotocol = serial 20:15:03.397 (reboot 25): Serial device COM8 will be tried first 20:15:03.397 (reboot 25): LoadLibrary cfgmgr32 ok 20:15:03.397 (reboot 25): LoadLibrary ntdll ok 20:15:03.399 (reboot 25): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#2056390#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:15:03.399 (reboot 25): found_usb_device, loc=usb:0/140000/0/8/2 Port_#0002.Hub_#0005 20:15:03.399 (reboot 25): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0200 20:15:03.399 (reboot 25): found_usb_device, devinst=00000002 20:15:03.399 (reboot 25): add: loc=usb:0/140000/0/8/2, class=Ports, vid=16C0, pid=0483, ver=0200, serial=205, dev=\\?\usb#vid_16c0&pid_0483#2056390#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:15:03.399 (reboot 25): comport_from_devinst_list attempt 20:15:03.399 (reboot 25): found Ports in classguid_list at index=0 20:15:03.399 (reboot 25): port COM8 found from devnode 20:15:03.399 (reboot 25): found_usb_device complete 20:15:03.399 (reboot 25): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1113960#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:15:03.399 (reboot 25): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0200 20:15:03.399 (reboot 25): found_usb_device, loc=usb:0/140000/0/8/1 Port_#0001.Hub_#0005 20:15:03.399 (reboot 25): found_usb_device, devinst=00000007 20:15:03.399 (reboot 25): add: loc=usb:0/140000/0/8/1, class=Ports, vid=16C0, pid=0483, ver=0200, serial=111, dev=\\?\usb#vid_16c0&pid_0483#1113960#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:15:03.399 (reboot 25): comport_from_devinst_list attempt 20:15:03.399 (reboot 25): found Ports in classguid_list at index=0 20:15:03.399 (reboot 25): port COM11 found from devnode 20:15:03.399 (reboot 25): found_usb_device complete 20:15:03.402 (loader): remote connection 1752 opened 20:15:03.402 (loader): remote cmd from 1752: "show:arduino_attempt_reboot" 20:15:03.410 (reboot 25): found Teensy Loader, version 1.42 20:15:03.410 (reboot 25): Sending command: show:arduino_attempt_reboot 20:15:03.412 (loader): got request to show arduino rebooting message 20:15:03.422 (loader): remote cmd from 1752: "comment: Teensyduino 1.42-beta4 - WINDOWS (teensy_reboot)" 20:15:03.422 (loader): remote cmd from 1752: "status" 20:15:03.423 (reboot 25): Sending command: comment: Teensyduino 1.42-beta4 - WINDOWS (teensy_reboot) 20:15:03.436 (reboot 25): Status: 1, 1, 0, 4, 0, 0, T:\TEMP\arduino_build_466842\, MemFault.ino.hex 20:15:03.436 (reboot 25): do_reset (serial) COM8 20:15:03.444 (loader): remote cmd from 1752: "status" 20:15:03.451 (reboot 25): Status: 1, 1, 0, 4, 0, 0, T:\TEMP\arduino_build_466842\, MemFault.ino.hex 20:15:03.451 (reboot 25): status read, retry 0 20:15:03.510 (ports 1): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:15:03.510 (ports 1): remove: loc=usb:0/140000/0/8/2 20:15:03.510 (ports 1): usb_remove: usb:0/140000/0/8/2 20:15:03.510 (ports 1): nothing new, skipping HID & Ports enum 20:15:03.511 (serialmon 21): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:15:03.512 (serialmon 21): remove: loc=usb:0/140000/0/8/2 20:15:03.512 (serialmon 21): usb_remove: usb:0/140000/0/8/2 20:15:03.512 (serialmon 21): nothing new, skipping HID & Ports enum 20:15:03.550 (serialmon 21): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:15:03.550 (serialmon 21): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:15:03.551 (serialmon 21): nothing new, skipping HID & Ports enum 20:15:03.638 (loader): remote cmd from 1752: "status" 20:15:03.655 (reboot 25): Status: 1, 1, 0, 4, 0, 0, T:\TEMP\arduino_build_466842\, MemFault.ino.hex 20:15:03.655 (reboot 25): status read, retry 1 20:15:03.658 (ports 1): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:15:03.658 (ports 1): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:15:03.659 (ports 1): nothing new, skipping HID & Ports enum 20:15:03.757 (loader): remote cmd from 1752: "status" 20:15:03.765 (reboot 25): Status: 1, 1, 0, 4, 0, 0, T:\TEMP\arduino_build_466842\, MemFault.ino.hex 20:15:03.765 (reboot 25): status read, retry 2 20:15:03.800 (ports 1): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:15:03.800 (serialmon 21): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:15:03.801 (serialmon 21): found_usb_device, id=\\?\usb#vid_16c0&pid_0478#00032347#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:15:03.801 (serialmon 21): found_usb_device, loc=usb:0/140000/0/8/2 Port_#0002.Hub_#0005 20:15:03.801 (serialmon 21): found_usb_device, hwid=USB\VID_16C0&PID_0478&REV_0103 20:15:03.801 (serialmon 21): found_usb_device, devinst=0000001c 20:15:03.801 (serialmon 21): add: loc=usb:0/140000/0/8/2, class=HID, vid=16C0, pid=0478, ver=0103, serial=000, dev=\\?\usb#vid_16c0&pid_0478#00032347#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:15:03.801 (serialmon 21): hiddev_from_devinst_list: iface=0 20:15:03.801 (ports 1): found_usb_device, id=\\?\usb#vid_16c0&pid_0478#00032347#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:15:03.801 (ports 1): found_usb_device, loc=usb:0/140000/0/8/2 Port_#0002.Hub_#0005 20:15:03.801 (ports 1): found_usb_device, hwid=USB\VID_16C0&PID_0478&REV_0103 20:15:03.801 (ports 1): found_usb_device, devinst=0000001c 20:15:03.801 (ports 1): add: loc=usb:0/140000/0/8/2, class=HID, vid=16C0, pid=0478, ver=0103, serial=000, dev=\\?\usb#vid_16c0&pid_0478#00032347#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:15:03.801 (ports 1): hiddev_from_devinst_list: iface=0 20:15:03.802 (serialmon 21): found_usb_device complete 20:15:03.802 (ports 1): found_usb_device complete 20:15:03.803 (serialmon 21): found new COM port, devinst=00000007 20:15:03.803 (serialmon 21): portname=COM11 20:15:03.803 (serialmon 21): usb_add: usb:0/140000/0/8/2 20:15:03.803 (serialmon 21): ignoring partial USB device discovery (Windows XP issue?) 20:15:03.803 (serialmon 21): usb_add: usb:0/140000/0/8/1 20:15:03.803 (ports 1): usb_add: usb:0/140000/0/8/2 [no_device] (Teensy 3.6) Bootloader 20:15:03.978 (loader): remote cmd from 1752: "status" 20:15:03.980 (loader): Device came online, code_size = 1048576 20:15:03.980 (loader): Board is: Teensy 3.6 (MK66FX1M0), version 1.03 20:15:03.980 (serialmon 21): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:15:03.980 (serialmon 21): update_usb_device, devinst list change, old had 1, new has 2 20:15:03.980 (serialmon 21): hiddev_from_devinst_list: iface=0 20:15:03.981 (serialmon 21): hid, found devinst=0000001D 20:15:03.982 (serialmon 21): usb_add: usb:0/140000/0/8/2 20:15:03.982 (serialmon 21): ignoring partial USB device discovery (Windows XP issue?) 20:15:03.983 (loader): File "MemFault.ino.hex". 15004 bytes, 1% used 20:15:03.984 (loader): set background IMG_ONLINE 20:15:03.989 (loader): File "MemFault.ino.hex". 15004 bytes, 1% used 20:15:03.990 (loader): elf size appears to be 1048576 20:15:03.990 (loader): elf binary data matches hex file 20:15:03.990 (loader): Code size from .elf file = 1048576 20:15:03.990 (loader): begin operation 20:15:04.001 (reboot 25): Status: 1, 1, 1, 5, 0, 1, T:\TEMP\arduino_build_466842\, MemFault.ino.hex 20:15:04.038 (ports 1): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:15:04.039 (ports 1): update_usb_device, devinst list change, old had 1, new has 2 20:15:04.039 (ports 1): hiddev_from_devinst_list: iface=0 20:15:04.040 (ports 1): hid, found devinst=0000001D 20:15:04.040 (ports 1): hid, path=\\?\hid#vid_16c0&pid_0478#8&1e4f6cc3&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 20:15:04.040 (ports 1): hid, opened handle 20:15:04.040 (ports 1): devinst=0000001D, location=usb:0/140000/0/8/2 20:15:04.040 (ports 1): vid=16C0, pid=0478, ver=0103, usepage=FF9C, use=0022 20:15:04.040 (ports 1): devpath=\\?\hid#vid_16c0&pid_0478#8&1e4f6cc3&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 20:15:04.041 (ports 1): usb_add: usb:0/140000/0/8/2 \\?\hid#vid_16c0&pid_0478#8&1e4f6cc3&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} (Teensy 3.6) Bootloader 20:15:04.107 (loader): remote cmd from 1752: "status" 20:15:04.125 (reboot 25): Status: 1, 1, 1, 5, 0, 1, T:\TEMP\arduino_build_466842\, MemFault.ino.hex 20:15:04.127 (loader): flash, block=0, bs=1024, auto=1 20:15:04.137 (loader): flash, block=1, bs=1024, auto=1 20:15:04.147 (loader): flash, block=2, bs=1024, auto=1 20:15:04.147 (loader): flash, block=3, bs=1024, auto=1 20:15:04.419 (loader): remote cmd from 1752: "status" 20:15:04.427 (loader): flash, block=4, bs=1024, auto=1 20:15:04.432 (reboot 25): Status: 1, 1, 1, 5, 0, 1, T:\TEMP\arduino_build_466842\, MemFault.ino.hex 20:15:04.447 (loader): flash, block=5, bs=1024, auto=1 20:15:04.484 (loader): flash, block=6, bs=1024, auto=1 20:15:04.494 (loader): flash, block=7, bs=1024, auto=1 20:15:04.503 (loader): flash, block=8, bs=1024, auto=1 20:15:04.533 (loader): flash, block=9, bs=1024, auto=1 20:15:04.543 (loader): remote cmd from 1752: "status" 20:15:04.550 (loader): flash, block=10, bs=1024, auto=1 20:15:04.550 (reboot 25): Status: 1, 1, 1, 5, 0, 1, T:\TEMP\arduino_build_466842\, MemFault.ino.hex 20:15:04.557 (loader): flash, block=11, bs=1024, auto=1 20:15:04.565 (loader): flash, block=12, bs=1024, auto=1 20:15:04.568 (loader): flash, block=13, bs=1024, auto=1 20:15:04.581 (loader): flash, block=14, bs=1024, auto=1 20:15:04.593 (loader): sending reboot 20:15:04.600 (loader): begin wait_until_offline 20:15:04.666 (serialmon 21): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:15:04.666 (ports 1): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:15:04.667 (serialmon 21): remove: loc=usb:0/140000/0/8/2 20:15:04.667 (serialmon 21): usb_remove: usb:0/140000/0/8/2 20:15:04.667 (serialmon 21): nothing new, skipping HID & Ports enum 20:15:04.667 (ports 1): remove: loc=usb:0/140000/0/8/2 20:15:04.667 (ports 1): usb_remove: usb:0/140000/0/8/2 20:15:04.667 (ports 1): nothing new, skipping HID & Ports enum 20:15:04.667 (loader): offline, waited 1 20:15:04.667 (loader): end operation, total time = 0.678 seconds 20:15:04.678 (loader): set background IMG_REBOOT_OK 20:15:04.694 (loader): redraw timer set, image 14 to show for 1200 ms 20:15:04.697 (loader): remote cmd from 1752: "status" 20:15:04.707 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:15:04.710 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:15:04.717 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:15:04.729 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:15:04.738 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:15:04.743 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:15:04.747 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 20:15:04.757 (loader): HID/win32: vid:1B80 pid:B410 ver:0131 20:15:04.757 (loader): HID/win32: vid:051D pid:0002 ver:0106 20:15:04.775 (reboot 25): Status: 1, 1, 0, 5, 0, 0, T:\TEMP\arduino_build_466842\, MemFault.ino.hex 20:15:04.775 (reboot 25): status read, retry 3 20:15:04.775 (reboot 25): Success 20:15:04.775 (reboot 25): Disconnect 20:15:04.779 (serialmon 21): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:15:04.779 (serialmon 21): nothing new, skipping HID & Ports enum 20:15:04.792 (ports 1): got command: "list" 20:15:04.793 (ports 1): nothing new, skipping HID & Ports enum 20:15:04.794 (ports 1): got command: "list" 20:15:04.795 (ports 1): nothing new, skipping HID & Ports enum 20:15:04.807 (loader): remote connection 1752 closed 20:15:04.807 (loader): remote connection 1748 closed 20:15:04.864 (ports 1): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:15:04.865 (ports 1): nothing new, skipping HID & Ports enum 20:15:04.922 (ports 1): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:15:04.922 (serialmon 21): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:15:04.922 (serialmon 21): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#2056390#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:15:04.922 (serialmon 21): found_usb_device, loc=usb:0/140000/0/8/2 Port_#0002.Hub_#0005 20:15:04.922 (serialmon 21): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0200 20:15:04.922 (serialmon 21): found_usb_device, devinst=00000002 20:15:04.922 (serialmon 21): add: loc=usb:0/140000/0/8/2, class=Ports, vid=16C0, pid=0483, ver=0200, serial=205, dev=\\?\usb#vid_16c0&pid_0483#2056390#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:15:04.922 (serialmon 21): comport_from_devinst_list attempt 20:15:04.922 (serialmon 21): found Ports in classguid_list at index=0 20:15:04.923 (ports 1): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#2056390#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:15:04.923 (ports 1): found_usb_device, loc=usb:0/140000/0/8/2 Port_#0002.Hub_#0005 20:15:04.923 (ports 1): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0200 20:15:04.923 (ports 1): found_usb_device, devinst=00000002 20:15:04.923 (ports 1): add: loc=usb:0/140000/0/8/2, class=Ports, vid=16C0, pid=0483, ver=0200, serial=205, dev=\\?\usb#vid_16c0&pid_0483#2056390#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:15:04.923 (serialmon 21): port COM8 found from devnode 20:15:04.923 (serialmon 21): found_usb_device complete 20:15:04.923 (ports 1): comport_from_devinst_list attempt 20:15:04.923 (ports 1): found Ports in classguid_list at index=0 20:15:04.923 (ports 1): port COM8 found from devnode 20:15:04.923 (ports 1): found_usb_device complete 20:15:04.924 (serialmon 21): usb_add: usb:0/140000/0/8/2 20:15:04.924 (ports 1): usb_add: usb:0/140000/0/8/2 COM8 (Teensy 3.6) Serial 20:15:05.018 (serialmon 21): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:15:05.018 (serialmon 21): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:15:05.019 (serialmon 21): nothing new, skipping HID & Ports enum 20:15:05.078 (ports 1): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:15:05.079 (ports 1): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:15:05.080 (ports 1): nothing new, skipping HID & Ports enum 20:15:05.326 (serialmon 21): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:15:05.327 (serialmon 21): nothing new, skipping HID & Ports enum 20:15:05.353 (ports 1): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:15:05.354 (ports 1): nothing new, skipping HID & Ports enum 20:15:05.887 (loader): redraw, image 9 20:15:56.577 (ports 1): got command: "list" 20:15:56.578 (ports 1): nothing new, skipping HID & Ports enum 20:16:02.162 (ports 1): got command: "list" 20:16:02.163 (ports 1): nothing new, skipping HID & Ports enum 20:16:05.773 (ports 1): got command: "list" 20:16:05.774 (ports 1): nothing new, skipping HID & Ports enum 20:16:21.891 (ports 1): got command: "list" 20:16:21.892 (ports 1): nothing new, skipping HID & Ports enum 20:16:27.130 (ports 1): got command: "list" 20:16:27.132 (ports 1): nothing new, skipping HID & Ports enum 20:16:27.530 (serialmon 26): Begin, version=1.42-beta4, high-res time 20:16:27.530 (serialmon 26): listening for location: usb:0/140000/0/8/2 20:16:27.530 (serialmon 26): LoadLibrary cfgmgr32 ok 20:16:27.530 (serialmon 26): LoadLibrary ntdll ok 20:16:27.536 (serialmon 26): callback 0024 20:16:27.536 (serialmon 26): callback 0081 20:16:27.540 (serialmon 26): callback 0083 20:16:27.542 (serialmon 26): hWnd = 1058858 20:16:27.542 (serialmon 26): loop stdin, ready=2097151 20:16:27.544 (serialmon 26): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#2056390#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:16:27.544 (serialmon 26): found_usb_device, loc=usb:0/140000/0/8/2 Port_#0002.Hub_#0005 20:16:27.544 (serialmon 26): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0200 20:16:27.544 (serialmon 26): found_usb_device, devinst=00000002 20:16:27.544 (serialmon 26): add: loc=usb:0/140000/0/8/2, class=Ports, vid=16C0, pid=0483, ver=0200, serial=205, dev=\\?\usb#vid_16c0&pid_0483#2056390#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:16:27.544 (serialmon 26): comport_from_devinst_list attempt 20:16:27.544 (serialmon 26): found Ports in classguid_list at index=0 20:16:27.544 (serialmon 26): port COM8 found from devnode 20:16:27.544 (serialmon 26): found_usb_device complete 20:16:27.544 (serialmon 26): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1113960#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:16:27.544 (serialmon 26): found_usb_device, loc=usb:0/140000/0/8/1 Port_#0001.Hub_#0005 20:16:27.544 (serialmon 26): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0200 20:16:27.544 (serialmon 26): found_usb_device, devinst=00000007 20:16:27.544 (serialmon 26): add: loc=usb:0/140000/0/8/1, class=Ports, vid=16C0, pid=0483, ver=0200, serial=111, dev=\\?\usb#vid_16c0&pid_0483#1113960#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:16:27.544 (serialmon 26): comport_from_devinst_list attempt 20:16:27.544 (serialmon 26): found Ports in classguid_list at index=0 20:16:27.544 (serialmon 26): port COM11 found from devnode 20:16:27.544 (serialmon 26): found_usb_device complete 20:16:27.546 (serialmon 26): usb_add: usb:0/140000/0/8/1 20:16:30.554 (loader): remote connection 1596 opened 20:16:30.562 (serialmon 26): usb_add: usb:0/140000/0/8/2 20:16:30.562 (serialmon 26): translate "COM8" -> "\\.\COM8" 20:16:30.601 (serialmon 26): GetDefaultCommConfig success 20:16:30.644 (serialmon 26): SetDefaultCommConfig success 20:16:30.644 (serialmon 26): Opened \\.\COM8 Serial 20:16:30.649 (serialmon 21): callback 001A 20:16:30.649 (ports 1): callback 001A 20:16:30.654 (serialmon 26): callback 001A 20:16:32.382 (serialmon 26): teensy read ov error 20:16:32.382 (serialmon 26): teensy read error 20:16:32.385 (ports 1): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:16:32.386 (ports 1): remove: loc=usb:0/140000/0/8/2 20:16:32.386 (ports 1): usb_remove: usb:0/140000/0/8/2 20:16:32.386 (ports 1): nothing new, skipping HID & Ports enum 20:16:32.389 (serialmon 21): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:16:32.389 (serialmon 26): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:16:32.390 (serialmon 26): remove: loc=usb:0/140000/0/8/2 20:16:32.390 (serialmon 26): usb_remove: usb:0/140000/0/8/2 20:16:32.390 (serialmon 26): Disconnect \\.\COM8 20:16:32.390 (serialmon 21): remove: loc=usb:0/140000/0/8/2 20:16:32.390 (serialmon 21): usb_remove: usb:0/140000/0/8/2 20:16:32.390 (serialmon 21): nothing new, skipping HID & Ports enum 20:16:32.390 (serialmon 26): nothing new, skipping HID & Ports enum 20:16:32.457 (serialmon 26): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:16:32.457 (serialmon 26): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:16:32.458 (serialmon 26): nothing new, skipping HID & Ports enum 20:16:32.459 (serialmon 21): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:16:32.459 (serialmon 21): nothing new, skipping HID & Ports enum 20:16:32.460 (serialmon 21): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:16:32.460 (serialmon 21): nothing new, skipping HID & Ports enum 20:16:32.534 (ports 1): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 20:16:32.534 (ports 1): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:16:32.535 (ports 1): nothing new, skipping HID & Ports enum 20:16:34.083 (ports 1): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:16:34.083 (serialmon 26): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:16:34.083 (serialmon 21): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:16:34.084 (ports 1): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#2056390#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:16:34.084 (ports 1): found_usb_device, loc=usb:0/140000/0/8/2 Port_#0002.Hub_#0005 20:16:34.084 (ports 1): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0200 20:16:34.084 (ports 1): found_usb_device, devinst=00000002 20:16:34.084 (ports 1): add: loc=usb:0/140000/0/8/2, class=Ports, vid=16C0, pid=0483, ver=0200, serial=205, dev=\\?\usb#vid_16c0&pid_0483#2056390#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:16:34.084 (ports 1): comport_from_devinst_list attempt 20:16:34.084 (ports 1): found Ports in classguid_list at index=0 20:16:34.084 (serialmon 26): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#2056390#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:16:34.084 (serialmon 26): found_usb_device, loc=usb:0/140000/0/8/2 Port_#0002.Hub_#0005 20:16:34.084 (serialmon 26): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0200 20:16:34.084 (serialmon 26): found_usb_device, devinst=00000002 20:16:34.084 (ports 1): port COM8 found from devnode 20:16:34.084 (ports 1): found_usb_device complete 20:16:34.084 (serialmon 26): add: loc=usb:0/140000/0/8/2, class=Ports, vid=16C0, pid=0483, ver=0200, serial=205, dev=\\?\usb#vid_16c0&pid_0483#2056390#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:16:34.084 (serialmon 26): comport_from_devinst_list attempt 20:16:34.084 (serialmon 26): found Ports in classguid_list at index=0 20:16:34.084 (serialmon 26): port COM8 found from devnode 20:16:34.084 (serialmon 26): found_usb_device complete 20:16:34.084 (serialmon 21): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#2056390#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:16:34.084 (serialmon 21): found_usb_device, loc=usb:0/140000/0/8/2 Port_#0002.Hub_#0005 20:16:34.084 (serialmon 21): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0200 20:16:34.084 (serialmon 21): found_usb_device, devinst=00000002 20:16:34.084 (serialmon 21): add: loc=usb:0/140000/0/8/2, class=Ports, vid=16C0, pid=0483, ver=0200, serial=205, dev=\\?\usb#vid_16c0&pid_0483#2056390#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 20:16:34.084 (serialmon 21): comport_from_devinst_list attempt 20:16:34.084 (serialmon 21): found Ports in classguid_list at index=0 20:16:34.084 (serialmon 21): port COM8 found from devnode 20:16:34.084 (serialmon 21): found_usb_device complete 20:16:34.085 (ports 1): usb_add: usb:0/140000/0/8/2 COM8 (Teensy 3.6) Serial 20:16:34.086 (serialmon 21): usb_add: usb:0/140000/0/8/2 20:16:34.086 (serialmon 26): usb_add: usb:0/140000/0/8/2 20:16:34.086 (serialmon 26): translate "COM8" -> "\\.\COM8" 20:16:34.131 (serialmon 26): GetDefaultCommConfig success 20:16:34.172 (serialmon 26): SetDefaultCommConfig success 20:16:34.172 (serialmon 26): Opened \\.\COM8 Serial 20:16:34.176 (serialmon 21): callback 001A 20:16:34.176 (ports 1): callback 001A 20:16:34.179 (serialmon 26): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:16:34.181 (serialmon 26): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:16:34.190 (serialmon 26): callback 001A 20:16:34.205 (serialmon 26): nothing new, skipping HID & Ports enum 20:16:34.334 (serialmon 21): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:16:34.334 (serialmon 21): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:16:34.335 (serialmon 21): nothing new, skipping HID & Ports enum 20:16:34.494 (ports 1): WM_DEVICECHANGE DBT_DEVICEARRIVAL 20:16:34.494 (ports 1): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:16:34.496 (ports 1): nothing new, skipping HID & Ports enum 20:16:34.757 (serialmon 26): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:16:34.758 (serialmon 26): nothing new, skipping HID & Ports enum 20:16:34.759 (serialmon 21): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:16:34.760 (serialmon 21): nothing new, skipping HID & Ports enum 20:16:34.823 (ports 1): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 20:16:34.824 (ports 1): nothing new, skipping HID & Ports enum