// removed lots of older // clipped out about 2 MB of stuff - mostly the callbacks COM19 is PROD T_4.1 moved to COM17 Beta T_4.1 and had confusion needing button // put '...' between the cuts 15:22:08.454 (ports 197): callback C159 15:22:08.460 (ports 2): callback C159 15:22:09.343 (loader): remote connection 2328 closed 15:22:10.474 (ports 197): callback C159 15:22:10.480 (ports 2): callback C159 15:22:11.950 (loader): file changed 15:22:11.957 (post_compile 238): Begin, version=1.52, high-res time 15:22:11.963 (loader): File "YieldTest.ino.hex". 36028 bytes, 0% used 15:22:11.966 (loader): remote connection 2228 opened 15:22:11.966 (loader): remote cmd from 2228: "comment: Teensyduino 1.52 - WINDOWS (teensy_post_compile)" 15:22:11.967 (post_compile 238): Sending command: comment: Teensyduino 1.52 - WINDOWS (teensy_post_compile) 15:22:11.969 (loader): remote cmd from 2228: "status" 15:22:11.972 (post_compile 238): Status: 1, 1, 0, 104, 4, 0, T:\TEMP\arduino_build_547525\, YieldTest.ino.hex 15:22:11.972 (post_compile 238): Sending command: dir:T:\TEMP\arduino_build_547525\ 15:22:11.972 (loader): remote cmd from 2228: "dir:T:\TEMP\arduino_build_547525\" 15:22:11.973 (post_compile 238): Sending command: file:YieldTest.ino.hex 15:22:11.973 (loader): remote cmd from 2228: "file:YieldTest.ino.hex" 15:22:11.986 (loader): File "YieldTest.ino.hex". 36028 bytes, 0% used 15:22:11.989 (loader): remote cmd from 2228: "status" 15:22:11.991 (post_compile 238): Status: 1, 1, 0, 104, 4, 0, T:\TEMP\arduino_build_547525\, YieldTest.ino.hex 15:22:11.991 (post_compile 238): Disconnect 15:22:12.002 (loader): remote connection 2228 closed 15:22:12.225 (post_compile 239): Begin, version=1.52, high-res time 15:22:12.230 (loader): remote connection 2328 opened 15:22:12.230 (loader): remote cmd from 2328: "comment: Teensyduino 1.52 - WINDOWS (teensy_post_compile)" 15:22:12.230 (loader): remote cmd from 2328: "status" 15:22:12.230 (post_compile 239): Sending command: comment: Teensyduino 1.52 - WINDOWS (teensy_post_compile) 15:22:12.232 (loader): remote cmd from 2328: "dir:T:\TEMP\arduino_build_547525\" 15:22:12.232 (loader): remote cmd from 2328: "file:YieldTest.ino.hex" 15:22:12.232 (post_compile 239): Status: 1, 1, 0, 104, 4, 0, T:\TEMP\arduino_build_547525\, YieldTest.ino.hex 15:22:12.232 (post_compile 239): Sending command: dir:T:\TEMP\arduino_build_547525\ 15:22:12.232 (post_compile 239): Sending command: file:YieldTest.ino.hex 15:22:12.245 (loader): File "YieldTest.ino.hex". 36028 bytes, 0% used 15:22:12.249 (loader): remote cmd from 2328: "status" 15:22:12.251 (post_compile 239): Status: 1, 1, 0, 104, 4, 0, T:\TEMP\arduino_build_547525\, YieldTest.ino.hex 15:22:12.251 (post_compile 239): Disconnect 15:22:12.262 (loader): remote connection 2328 closed 15:22:12.262 (loader): remote connection 3052 opened 15:22:12.262 (post_compile 240): Running teensy_reboot: "T:\arduino-1.8.12H\hardware\teensy\..\tools\teensy_reboot.exe" teensy_reboot.exe "-board=TEENSY41" "-port=usb:0/140000/0/5/1/1" "-portlabel=hid#vid_16c0&pid_0478 Bootloader" "-portprotocol=Teensy" 15:22:12.284 (reboot 241): Begin, version=1.52, high-res time 15:22:12.284 (reboot 241): location = usb:0/140000/0/5/1/1 15:22:12.284 (reboot 241): portprotocol = Teensy 15:22:12.284 (reboot 241): portlabel = hid#vid_16c0&pid_0478 Bootloader 15:22:12.284 (reboot 241): Only location usb:0/140000/0/5/1/1 will be tried 15:22:12.284 (reboot 241): LoadLibrary cfgmgr32 ok 15:22:12.284 (reboot 241): LoadLibrary ntdll ok 15:22:12.286 (reboot 241): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 15:22:12.286 (reboot 241): found_usb_device, loc=usb:0/140000/0/5/2 Port_#0002.Hub_#0006 15:22:12.286 (reboot 241): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0280 15:22:12.286 (reboot 241): found_usb_device, devinst=00000003 15:22:12.286 (reboot 241): add: loc=usb:0/140000/0/5/2, class=Ports, vid=16C0, pid=0483, ver=0280, serial=1000380, dev=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 15:22:12.286 (reboot 241): comport_from_devinst_list attempt 15:22:12.286 (reboot 241): found Ports in classguid_list at index=0 15:22:12.286 (reboot 241): port COM17 found from devnode 15:22:12.286 (reboot 241): found_usb_device complete 15:22:12.287 (reboot 241): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#7684130#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 15:22:12.287 (reboot 241): found_usb_device, loc=usb:0/140000/0/5/1/1 Port_#0001.Hub_#0009 15:22:12.287 (reboot 241): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0280 15:22:12.287 (reboot 241): found_usb_device, devinst=00000005 15:22:12.287 (reboot 241): add: loc=usb:0/140000/0/5/1/1, class=Ports, vid=16C0, pid=0483, ver=0280, serial=7684130, dev=\\?\usb#vid_16c0&pid_0483#7684130#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 15:22:12.287 (reboot 241): comport_from_devinst_list attempt 15:22:12.287 (reboot 241): found Ports in classguid_list at index=0 15:22:12.287 (reboot 241): port COM29 found from devnode 15:22:12.287 (reboot 241): found_usb_device complete 15:22:12.293 (loader): remote connection 2372 opened 15:22:12.293 (loader): remote cmd from 2372: "show:arduino_attempt_reboot" 15:22:12.293 (loader): got request to show arduino rebooting message 15:22:12.293 (reboot 241): found Teensy Loader, version 1.52 15:22:12.293 (reboot 241): Sending command: show:arduino_attempt_reboot 15:22:12.296 (reboot 241): Sending command: comment: Teensyduino 1.52 - WINDOWS (teensy_reboot) 15:22:12.296 (loader): remote cmd from 2372: "comment: Teensyduino 1.52 - WINDOWS (teensy_reboot)" 15:22:12.296 (loader): remote cmd from 2372: "status" 15:22:12.298 (reboot 241): Status: 1, 1, 0, 104, 4, 0, T:\TEMP\arduino_build_547525\, YieldTest.ino.hex 15:22:12.298 (reboot 241): do_reset (serial) COM29 15:22:12.301 (loader): remote cmd from 2372: "status" 15:22:12.303 (reboot 241): Status: 1, 1, 0, 104, 4, 0, T:\TEMP\arduino_build_547525\, YieldTest.ino.hex 15:22:12.303 (reboot 241): status read, retry 0 15:22:12.329 (ports 197): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 15:22:12.329 (ports 2): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 15:22:12.331 (ports 197): remove: loc=usb:0/140000/0/5/1/1 15:22:12.331 (ports 197): usb_remove: usb:0/140000/0/5/1/1 15:22:12.331 (ports 197): nothing new, skipping HID & Ports enum 15:22:12.331 (ports 2): remove: loc=usb:0/140000/0/5/1/1 15:22:12.331 (ports 2): usb_remove: usb:0/140000/0/5/1/1 15:22:12.331 (ports 2): nothing new, skipping HID & Ports enum 15:22:12.350 (ports 197): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 15:22:12.351 (ports 197): nothing new, skipping HID & Ports enum 15:22:12.352 (ports 197): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 15:22:12.353 (ports 197): nothing new, skipping HID & Ports enum 15:22:12.404 (loader): remote cmd from 2372: "status" 15:22:12.406 (reboot 241): Status: 1, 1, 0, 104, 4, 0, T:\TEMP\arduino_build_547525\, YieldTest.ino.hex 15:22:12.406 (reboot 241): status read, retry 1 15:22:12.507 (loader): remote cmd from 2372: "status" 15:22:12.509 (reboot 241): Status: 1, 1, 0, 104, 4, 0, T:\TEMP\arduino_build_547525\, YieldTest.ino.hex 15:22:12.509 (reboot 241): status read, retry 2 15:22:12.537 (ports 197): callback C159 15:22:12.542 (ports 197): WM_DEVICECHANGE DBT_DEVICEARRIVAL 15:22:12.542 (ports 2): WM_DEVICECHANGE DBT_DEVICEARRIVAL 15:22:12.543 (ports 197): found_usb_device, id=\\?\usb#vid_16c0&pid_0478#000bb99d#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 15:22:12.543 (ports 197): found_usb_device, loc=usb:0/140000/0/5/1/1 Port_#0001.Hub_#0009 15:22:12.543 (ports 197): found_usb_device, hwid=USB\VID_16C0&PID_0478&REV_0105 15:22:12.543 (ports 197): found_usb_device, devinst=00000020 15:22:12.543 (ports 197): add: loc=usb:0/140000/0/5/1/1, class=HID, vid=16C0, pid=0478, ver=0105, serial=000bb99d, dev=\\?\usb#vid_16c0&pid_0478#000bb99d#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 15:22:12.543 (ports 197): hiddev_from_devinst_list: iface=0 15:22:12.544 (ports 2): found_usb_device, id=\\?\usb#vid_16c0&pid_0478#000bb99d#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 15:22:12.544 (ports 2): found_usb_device, loc=usb:0/140000/0/5/1/1 Port_#0001.Hub_#0009 15:22:12.544 (ports 2): found_usb_device, hwid=USB\VID_16C0&PID_0478&REV_0105 15:22:12.544 (ports 2): found_usb_device, devinst=00000024 15:22:12.544 (ports 2): add: loc=usb:0/140000/0/5/1/1, class=HID, vid=16C0, pid=0478, ver=0105, serial=000bb99d, dev=\\?\usb#vid_16c0&pid_0478#000bb99d#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 15:22:12.544 (ports 2): hiddev_from_devinst_list: iface=0 15:22:12.544 (ports 197): found_usb_device complete 15:22:12.545 (ports 2): found_usb_device complete 15:22:12.546 (ports 197): usb_add: usb:0/140000/0/5/1/1 [no_device] (Teensy 4.1) Bootloader 15:22:12.546 (ports 2): usb_add: usb:0/140000/0/5/1/1 [no_device] (Teensy 4.1) Bootloader 15:22:12.609 (loader): remote cmd from 2372: "status" 15:22:12.611 (loader): Device came online, code_size = 8126464 15:22:12.611 (loader): Board is: Teensy 4.1 (IMXRT1062), version 1.05 15:22:12.627 (loader): File "YieldTest.ino.hex". 36028 bytes, 0% used 15:22:12.628 (loader): set background IMG_ONLINE 15:22:12.647 (loader): File "YieldTest.ino.hex". 36028 bytes, 0% used 15:22:12.648 (loader): elf appears to be for Teensy 4.1 (IMXRT1062) (8126464 bytes) 15:22:12.648 (loader): elf binary data matches hex file 15:22:12.648 (loader): elf file is for Teensy 4.1 (IMXRT1062) 15:22:12.648 (loader): begin operation 15:22:12.659 (reboot 241): Status: 1, 1, 1, 105, 4, 1, T:\TEMP\arduino_build_547525\, YieldTest.ino.hex 15:22:12.666 (loader): flash, block=0, bs=1024, auto=1 15:22:12.666 (loader): gauge old value = 0 15:22:12.666 (loader): flash, block=1, bs=1024, auto=1 15:22:12.826 (loader): gauge old value = 1 15:22:12.829 (loader): remote cmd from 2372: "status" 15:22:12.830 (reboot 241): Status: 1, 1, 1, 105, 4, 1, T:\TEMP\arduino_build_547525\, YieldTest.ino.hex 15:22:12.830 (loader): flash, block=2, bs=1024, auto=1 15:22:12.830 (loader): gauge old value = 2 15:22:12.830 (loader): flash, block=3, bs=1024, auto=1 15:22:12.830 (loader): gauge old value = 3 15:22:12.831 (loader): flash, block=4, bs=1024, auto=1 15:22:12.831 (loader): gauge old value = 4 15:22:12.839 (loader): flash, block=5, bs=1024, auto=1 15:22:12.839 (loader): gauge old value = 5 15:22:12.845 (loader): flash, block=6, bs=1024, auto=1 15:22:12.845 (loader): gauge old value = 6 15:22:12.848 (ports 2): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 15:22:12.848 (ports 2): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 15:22:12.848 (ports 2): callback C159 15:22:12.850 (loader): flash, block=7, bs=1024, auto=1 15:22:12.850 (loader): gauge old value = 7 15:22:12.851 (ports 2): hid, found devinst=00000025 15:22:12.851 (ports 2): hid, path=\\?\hid#vid_16c0&pid_0478#8&20f42858&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 15:22:12.851 (ports 2): hid, opened handle 15:22:12.851 (ports 2): devinst=00000025, location=usb:0/140000/0/5/1/1 15:22:12.851 (ports 2): vid=16C0, pid=0478, ver=0105, usepage=FF9C, use=0025 15:22:12.851 (ports 2): devpath=\\?\hid#vid_16c0&pid_0478#8&20f42858&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 15:22:12.852 (ports 2): usb_add: usb:0/140000/0/5/1/1 hid#vid_16c0&pid_0478 (Teensy 4.1) Bootloader 15:22:12.857 (loader): flash, block=8, bs=1024, auto=1 15:22:12.857 (loader): gauge old value = 8 15:22:12.862 (loader): flash, block=9, bs=1024, auto=1 15:22:12.862 (loader): gauge old value = 9 15:22:12.864 (loader): flash, block=10, bs=1024, auto=1 15:22:12.864 (loader): gauge old value = 10 15:22:12.865 (loader): flash, block=11, bs=1024, auto=1 15:22:12.866 (loader): gauge old value = 11 15:22:12.867 (loader): flash, block=12, bs=1024, auto=1 15:22:12.867 (loader): gauge old value = 12 15:22:12.869 (loader): flash, block=13, bs=1024, auto=1 15:22:12.869 (loader): gauge old value = 13 15:22:12.871 (loader): flash, block=14, bs=1024, auto=1 15:22:12.871 (loader): gauge old value = 14 15:22:12.873 (loader): flash, block=15, bs=1024, auto=1 15:22:12.873 (loader): gauge old value = 15 15:22:12.875 (loader): flash, block=16, bs=1024, auto=1 15:22:12.875 (loader): gauge old value = 16 15:22:12.877 (loader): flash, block=17, bs=1024, auto=1 15:22:12.877 (loader): gauge old value = 17 15:22:12.878 (loader): flash, block=18, bs=1024, auto=1 15:22:12.879 (loader): gauge old value = 18 15:22:12.880 (loader): flash, block=19, bs=1024, auto=1 15:22:12.880 (loader): gauge old value = 19 15:22:12.883 (loader): remote cmd from 2372: "status" 15:22:12.884 (reboot 241): Status: 1, 1, 1, 105, 4, 1, T:\TEMP\arduino_build_547525\, YieldTest.ino.hex 15:22:12.884 (loader): flash, block=20, bs=1024, auto=1 15:22:12.884 (loader): gauge old value = 20 15:22:12.887 (loader): flash, block=21, bs=1024, auto=1 15:22:12.887 (loader): gauge old value = 21 15:22:12.889 (loader): flash, block=22, bs=1024, auto=1 15:22:12.889 (loader): gauge old value = 22 15:22:12.891 (loader): flash, block=23, bs=1024, auto=1 15:22:12.891 (loader): gauge old value = 23 15:22:12.892 (loader): flash, block=24, bs=1024, auto=1 15:22:12.892 (loader): gauge old value = 24 15:22:12.895 (loader): flash, block=25, bs=1024, auto=1 15:22:12.895 (loader): gauge old value = 25 15:22:12.897 (loader): flash, block=26, bs=1024, auto=1 15:22:12.897 (loader): gauge old value = 26 15:22:12.899 (loader): flash, block=27, bs=1024, auto=1 15:22:12.899 (loader): gauge old value = 27 15:22:12.902 (loader): flash, block=28, bs=1024, auto=1 15:22:12.902 (loader): gauge old value = 28 15:22:12.907 (loader): flash, block=29, bs=1024, auto=1 15:22:12.907 (loader): gauge old value = 29 15:22:12.911 (loader): flash, block=30, bs=1024, auto=1 15:22:12.911 (loader): gauge old value = 30 15:22:12.913 (loader): flash, block=31, bs=1024, auto=1 15:22:12.913 (loader): gauge old value = 31 15:22:12.916 (loader): flash, block=32, bs=1024, auto=1 15:22:12.916 (loader): gauge old value = 32 15:22:12.919 (loader): flash, block=33, bs=1024, auto=1 15:22:12.919 (loader): gauge old value = 33 15:22:12.922 (loader): flash, block=34, bs=1024, auto=1 15:22:12.922 (loader): gauge old value = 34 15:22:12.927 (loader): flash, block=35, bs=1024, auto=1 15:22:12.927 (loader): gauge old value = 35 15:22:12.939 (loader): sending reboot 15:22:12.939 (loader): begin wait_until_offline 15:22:12.948 (ports 2): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 15:22:12.948 (ports 197): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 15:22:12.949 (ports 2): remove: loc=usb:0/140000/0/5/1/1 15:22:12.949 (ports 2): usb_remove: usb:0/140000/0/5/1/1 15:22:12.949 (ports 2): nothing new, skipping HID & Ports enum 15:22:12.950 (ports 197): remove: loc=usb:0/140000/0/5/1/1 15:22:12.950 (ports 197): usb_remove: usb:0/140000/0/5/1/1 15:22:12.950 (ports 197): nothing new, skipping HID & Ports enum 15:22:12.950 (ports 197): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 15:22:12.951 (ports 197): nothing new, skipping HID & Ports enum 15:22:12.990 (loader): offline, waited 1 15:22:12.990 (loader): end operation, total time = 0.342 seconds 15:22:12.991 (loader): set background IMG_REBOOT_OK 15:22:12.993 (loader): redraw timer set, image 14 to show for 1200 ms 15:22:12.993 (loader): remote cmd from 2372: "status" 15:22:12.994 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 15:22:12.995 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 15:22:12.995 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 15:22:12.995 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 15:22:12.995 (loader): HID/win32: vid:046D pid:C534 ver:2901 15:22:12.995 (loader): HID/win32: vid:046D pid:C534 ver:2901 15:22:12.995 (loader): HID/win32: vid:046D pid:C534 ver:2901 15:22:12.995 (loader): HID/win32: vid:046D pid:C534 ver:2901 15:22:12.995 (loader): HID/win32: vid:0764 pid:0501 ver:0001 15:22:12.996 (reboot 241): Status: 1, 1, 0, 105, 4, 0, T:\TEMP\arduino_build_547525\, YieldTest.ino.hex 15:22:12.996 (reboot 241): status read, retry 3 15:22:12.996 (reboot 241): Success 15:22:12.996 (reboot 241): Disconnect 15:22:13.008 (loader): remote connection 2372 closed 15:22:13.010 (loader): remote connection 3052 closed 15:22:13.124 (serialmon 242): Begin, version=1.52, high-res time 15:22:13.124 (serialmon 242): listening for location: usb:0/140000/0/5/1/1 15:22:13.124 (serialmon 242): LoadLibrary cfgmgr32 ok 15:22:13.124 (serialmon 242): LoadLibrary ntdll ok 15:22:13.132 (serialmon 242): callback 0024 15:22:13.133 (serialmon 242): callback 0081 15:22:13.137 (serialmon 242): callback 0083 15:22:13.138 (serialmon 242): hWnd = 2229174 15:22:13.138 (serialmon 242): loop stdin, ready=262143 15:22:13.141 (serialmon 242): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 15:22:13.141 (serialmon 242): found_usb_device, loc=usb:0/140000/0/5/2 Port_#0002.Hub_#0006 15:22:13.141 (serialmon 242): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0280 15:22:13.141 (serialmon 242): found_usb_device, devinst=00000003 15:22:13.141 (serialmon 242): add: loc=usb:0/140000/0/5/2, class=Ports, vid=16C0, pid=0483, ver=0280, serial=1000380, dev=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 15:22:13.141 (serialmon 242): comport_from_devinst_list attempt 15:22:13.141 (serialmon 242): found Ports in classguid_list at index=0 15:22:13.141 (serialmon 242): port COM17 found from devnode 15:22:13.141 (serialmon 242): found_usb_device complete 15:22:13.143 (serialmon 242): usb_add: usb:0/140000/0/5/2 15:22:13.147 (loader): remote connection 3052 opened 15:22:13.258 (ports 2): WM_DEVICECHANGE DBT_DEVICEARRIVAL 15:22:13.258 (ports 197): WM_DEVICECHANGE DBT_DEVICEARRIVAL 15:22:13.260 (ports 197): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#7684130#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 15:22:13.260 (ports 197): found_usb_device, loc=usb:0/140000/0/5/1/1 Port_#0001.Hub_#0009 15:22:13.260 (ports 197): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0280 15:22:13.260 (ports 197): found_usb_device, devinst=00000006 15:22:13.260 (ports 197): add: loc=usb:0/140000/0/5/1/1, class=Ports, vid=16C0, pid=0483, ver=0280, serial=7684130, dev=\\?\usb#vid_16c0&pid_0483#7684130#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 15:22:13.260 (ports 197): comport_from_devinst_list attempt 15:22:13.260 (ports 197): found Ports in classguid_list at index=0 15:22:13.260 (ports 197): port COM29 found from devnode 15:22:13.260 (ports 197): found_usb_device complete 15:22:13.260 (serialmon 242): WM_DEVICECHANGE DBT_DEVICEARRIVAL 15:22:13.260 (ports 2): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#7684130#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 15:22:13.260 (ports 2): found_usb_device, loc=usb:0/140000/0/5/1/1 Port_#0001.Hub_#0009 15:22:13.260 (ports 2): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0280 15:22:13.260 (ports 2): found_usb_device, devinst=00000022 15:22:13.260 (ports 2): add: loc=usb:0/140000/0/5/1/1, class=Ports, vid=16C0, pid=0483, ver=0280, serial=7684130, dev=\\?\usb#vid_16c0&pid_0483#7684130#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 15:22:13.260 (ports 2): comport_from_devinst_list attempt 15:22:13.260 (ports 2): found Ports in classguid_list at index=0 15:22:13.260 (ports 2): port COM29 found from devnode 15:22:13.260 (ports 2): found_usb_device complete 15:22:13.261 (ports 197): usb_add: usb:0/140000/0/5/1/1 COM29 (Teensy 4.1) Serial 15:22:13.261 (serialmon 242): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#7684130#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 15:22:13.261 (serialmon 242): found_usb_device, loc=usb:0/140000/0/5/1/1 Port_#0001.Hub_#0009 15:22:13.261 (serialmon 242): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0280 15:22:13.261 (serialmon 242): found_usb_device, devinst=0000001d 15:22:13.261 (serialmon 242): add: loc=usb:0/140000/0/5/1/1, class=Ports, vid=16C0, pid=0483, ver=0280, serial=7684130, dev=\\?\usb#vid_16c0&pid_0483#7684130#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 15:22:13.261 (serialmon 242): comport_from_devinst_list attempt 15:22:13.261 (serialmon 242): found Ports in classguid_list at index=0 15:22:13.261 (serialmon 242): port COM29 found from devnode 15:22:13.261 (serialmon 242): found_usb_device complete 15:22:13.262 (ports 2): usb_add: usb:0/140000/0/5/1/1 COM29 (Teensy 4.1) Serial 15:22:13.263 (serialmon 242): usb_add: usb:0/140000/0/5/1/1 15:22:13.263 (serialmon 242): translate "COM29" -> "\\.\COM29" 15:22:13.274 (ports 2): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 15:22:13.275 (ports 2): nothing new, skipping HID & Ports enum 15:22:13.451 (serialmon 242): GetDefaultCommConfig success 15:22:13.624 (serialmon 242): SetDefaultCommConfig success 15:22:13.625 (serialmon 242): Opened \\.\COM29 Serial 15:22:13.627 (ports 197): callback 001A 15:22:13.627 (ports 2): callback 001A 15:22:13.628 (serialmon 242): WM_DEVICECHANGE DBT_DEVICEARRIVAL 15:22:13.629 (serialmon 242): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 15:22:13.632 (serialmon 242): callback 001A 15:22:13.636 (serialmon 242): nothing new, skipping HID & Ports enum 15:22:14.112 (ports 197): WM_DEVICECHANGE DBT_DEVICEARRIVAL 15:22:14.112 (ports 197): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 15:22:14.117 (ports 197): nothing new, skipping HID & Ports enum 15:22:14.183 (loader): redraw, image 9 15:22:14.855 (ports 2): WM_DEVICECHANGE DBT_DEVICEARRIVAL 15:22:14.855 (ports 2): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 15:22:14.857 (ports 2): nothing new, skipping HID & Ports enum 15:22:14.900 (ports 197): callback C159 15:22:15.045 (ports 2): callback C159 15:22:17.077 (ports 197): callback C159 15:22:17.082 (ports 2): callback C159 15:22:19.097 (ports 197): callback C159 15:22:19.102 (ports 2): callback C159 15:22:21.117 (ports 197): callback C159 15:22:21.123 (ports 2): callback C159 15:22:23.142 (ports 197): callback C159 15:22:23.428 (ports 2): callback C159 15:22:25.447 (ports 197): callback C159 15:22:25.453 (ports 2): callback C159 15:22:27.467 (ports 197): callback C159 15:22:27.689 (ports 2): callback C159 15:22:29.705 (ports 197): callback C159 15:22:29.709 (ports 2): callback C159 15:22:31.724 (ports 197): callback C159 15:22:31.729 (ports 2): callback C159 15:22:33.744 (ports 197): callback C159 15:22:33.752 (ports 2): callback C159 15:22:35.766 (ports 197): callback C159 15:22:35.772 (ports 2): callback C159 15:22:37.798 (ports 197): callback C159 15:22:38.297 (ports 2): callback C159 15:22:40.316 (ports 197): callback C159 15:22:40.323 (ports 2): callback C159 15:22:42.334 (ports 197): callback C159 15:22:42.562 (ports 2): callback C159 15:22:44.578 (ports 197): callback C159 15:22:44.584 (ports 2): callback C159 15:22:46.598 (ports 197): callback C159 15:22:46.878 (ports 2): callback C159 15:22:48.893 (ports 197): callback C159 15:22:48.899 (ports 2): callback C159 15:22:50.915 (ports 197): callback C159 15:22:51.149 (ports 2): callback C159 15:22:53.166 (ports 197): callback C159 15:22:53.172 (ports 2): callback C159 15:22:55.187 (ports 197): callback C159 15:22:55.468 (ports 2): callback C159 15:22:57.483 (ports 197): callback C159 15:22:57.490 (ports 2): callback C159 15:22:59.247 (loader): remote connection 3052 closed 15:22:59.506 (ports 197): callback C159 15:22:59.734 (ports 2): callback C159 15:23:01.384 (serialmon 243): Begin, version=1.52, high-res time 15:23:01.384 (serialmon 243): listening for location: usb:0/140000/0/5/1/1 15:23:01.384 (serialmon 243): LoadLibrary cfgmgr32 ok 15:23:01.384 (serialmon 243): LoadLibrary ntdll ok 15:23:01.390 (serialmon 243): callback 0024 15:23:01.390 (serialmon 243): callback 0081 15:23:01.395 (serialmon 243): callback 0083 15:23:01.397 (serialmon 243): hWnd = 7736318 15:23:01.397 (serialmon 243): loop stdin, ready=262143 15:23:01.400 (serialmon 243): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 15:23:01.400 (serialmon 243): found_usb_device, loc=usb:0/140000/0/5/2 Port_#0002.Hub_#0006 15:23:01.400 (serialmon 243): found_usb_device, devinst=00000003 15:23:01.400 (serialmon 243): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0280 15:23:01.400 (serialmon 243): add: loc=usb:0/140000/0/5/2, class=Ports, vid=16C0, pid=0483, ver=0280, serial=1000380, dev=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 15:23:01.400 (serialmon 243): comport_from_devinst_list attempt 15:23:01.400 (serialmon 243): found Ports in classguid_list at index=0 15:23:01.400 (serialmon 243): port COM17 found from devnode 15:23:01.400 (serialmon 243): found_usb_device complete 15:23:01.400 (serialmon 243): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#7684130#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 15:23:01.400 (serialmon 243): found_usb_device, loc=usb:0/140000/0/5/1/1 Port_#0001.Hub_#0009 15:23:01.400 (serialmon 243): found_usb_device, devinst=00000005 15:23:01.400 (serialmon 243): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0280 15:23:01.400 (serialmon 243): add: loc=usb:0/140000/0/5/1/1, class=Ports, vid=16C0, pid=0483, ver=0280, serial=7684130, dev=\\?\usb#vid_16c0&pid_0483#7684130#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 15:23:01.400 (serialmon 243): comport_from_devinst_list attempt 15:23:01.400 (serialmon 243): found Ports in classguid_list at index=0 15:23:01.400 (serialmon 243): port COM29 found from devnode 15:23:01.400 (serialmon 243): found_usb_device complete 15:23:01.403 (serialmon 243): usb_add: usb:0/140000/0/5/1/1 15:23:01.403 (serialmon 243): translate "COM29" -> "\\.\COM29" 15:23:01.575 (serialmon 243): GetDefaultCommConfig success 15:23:01.748 (serialmon 243): SetDefaultCommConfig success 15:23:01.748 (serialmon 243): Opened \\.\COM29 Serial 15:23:01.751 (ports 197): callback 001A 15:23:01.751 (ports 2): callback 001A 15:23:01.778 (loader): remote connection 3012 opened 15:23:01.780 (serialmon 243): usb_add: usb:0/140000/0/5/2 15:23:02.223 (ports 197): callback C159 15:23:02.623 (ports 2): callback C159 15:23:04.638 (ports 197): callback C159 15:23:04.644 (ports 2): callback C159 15:23:06.659 (ports 197): callback C159 15:23:06.928 (ports 2): callback C159 15:23:08.946 (ports 197): callback C159 15:23:08.952 (ports 2): callback C159 15:23:10.966 (ports 197): callback C159 15:23:11.191 (ports 2): callback C159 15:23:13.206 (ports 197): callback C159 15:23:13.210 (ports 2): callback C159 15:23:15.223 (ports 197): callback C159 15:23:15.542 (ports 2): callback C159 15:23:17.558 (ports 197): callback C159 15:23:17.563 (ports 2): callback C159 15:23:19.579 (ports 197): callback C159 15:23:19.820 (ports 2): callback C159 15:23:21.840 (ports 197): callback C159 15:23:21.845 (ports 2): callback C159 15:23:23.859 (ports 197): callback C159 15:23:24.199 (ports 2): callback C159 15:23:26.215 (ports 197): callback C159 15:23:26.221 (ports 2): callback C159 15:23:28.233 (ports 197): callback C159 15:23:28.454 (ports 2): callback C159 15:23:28.986 (loader): remote connection 3012 closed 15:23:30.549 (ports 197): callback C159 15:23:30.562 (ports 2): callback C159 15:23:31.600 (post_compile 244): Begin, version=1.52, high-res time 15:23:31.603 (loader): remote connection 3052 opened 15:23:31.604 (post_compile 244): Sending command: comment: Teensyduino 1.52 - WINDOWS (teensy_post_compile) 15:23:31.604 (loader): remote cmd from 3052: "comment: Teensyduino 1.52 - WINDOWS (teensy_post_compile)" 15:23:31.605 (loader): remote cmd from 3052: "status" 15:23:31.605 (loader): file changed 15:23:31.618 (loader): File "YieldTest.ino.hex". 36012 bytes, 0% used 15:23:31.621 (post_compile 244): Status: 1, 1, 0, 105, 4, 0, T:\TEMP\arduino_build_547525\, YieldTest.ino.hex 15:23:31.621 (post_compile 244): Sending command: dir:T:\TEMP\arduino_build_547525\ 15:23:31.635 (loader): remote cmd from 3052: "dir:T:\TEMP\arduino_build_547525\" 15:23:31.635 (post_compile 244): Sending command: file:YieldTest.ino.hex 15:23:31.636 (loader): remote cmd from 3052: "file:YieldTest.ino.hex" 15:23:31.649 (loader): File "YieldTest.ino.hex". 36012 bytes, 0% used 15:23:31.657 (loader): remote cmd from 3052: "status" 15:23:31.659 (post_compile 244): Status: 1, 1, 0, 105, 4, 0, T:\TEMP\arduino_build_547525\, YieldTest.ino.hex 15:23:31.659 (post_compile 244): Disconnect 15:23:31.670 (loader): remote connection 3052 closed 15:23:31.905 (post_compile 245): Begin, version=1.52, high-res time 15:23:31.909 (loader): remote connection 3052 opened 15:23:31.909 (loader): remote cmd from 3052: "comment: Teensyduino 1.52 - WINDOWS (teensy_post_compile)" 15:23:31.909 (loader): remote cmd from 3052: "status" 15:23:31.910 (post_compile 245): Sending command: comment: Teensyduino 1.52 - WINDOWS (teensy_post_compile) 15:23:31.911 (loader): remote cmd from 3052: "dir:T:\TEMP\arduino_build_547525\" 15:23:31.911 (loader): remote cmd from 3052: "file:YieldTest.ino.hex" 15:23:31.912 (post_compile 245): Status: 1, 1, 0, 105, 4, 0, T:\TEMP\arduino_build_547525\, YieldTest.ino.hex 15:23:31.912 (post_compile 245): Sending command: dir:T:\TEMP\arduino_build_547525\ 15:23:31.912 (post_compile 245): Sending command: file:YieldTest.ino.hex 15:23:31.925 (loader): File "YieldTest.ino.hex". 36012 bytes, 0% used 15:23:31.929 (loader): remote cmd from 3052: "status" 15:23:31.932 (post_compile 245): Status: 1, 1, 0, 105, 4, 0, T:\TEMP\arduino_build_547525\, YieldTest.ino.hex 15:23:31.932 (post_compile 245): Disconnect 15:23:31.942 (loader): remote connection 3052 closed 15:23:31.942 (loader): remote connection 3052 opened 15:23:31.942 (post_compile 246): Running teensy_reboot: "T:\arduino-1.8.12H\hardware\teensy\..\tools\teensy_reboot.exe" teensy_reboot.exe "-board=TEENSY41" "-port=usb:0/140000/0/5/1/1" "-portlabel=[no_device] Bootloader" "-portprotocol=Teensy" 15:23:31.963 (reboot 247): Begin, version=1.52, high-res time 15:23:31.963 (reboot 247): location = usb:0/140000/0/5/1/1 15:23:31.963 (reboot 247): portlabel = [no_device] Bootloader 15:23:31.963 (reboot 247): portprotocol = Teensy 15:23:31.963 (reboot 247): Only location usb:0/140000/0/5/1/1 will be tried 15:23:31.963 (reboot 247): LoadLibrary cfgmgr32 ok 15:23:31.963 (reboot 247): LoadLibrary ntdll ok 15:23:31.966 (reboot 247): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 15:23:31.966 (reboot 247): found_usb_device, loc=usb:0/140000/0/5/2 Port_#0002.Hub_#0006 15:23:31.966 (reboot 247): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0280 15:23:31.966 (reboot 247): found_usb_device, devinst=00000003 15:23:31.966 (reboot 247): add: loc=usb:0/140000/0/5/2, class=Ports, vid=16C0, pid=0483, ver=0280, serial=1000380, dev=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 15:23:31.966 (reboot 247): comport_from_devinst_list attempt 15:23:31.966 (reboot 247): found Ports in classguid_list at index=0 15:23:31.966 (reboot 247): port COM17 found from devnode 15:23:31.966 (reboot 247): found_usb_device complete 15:23:31.966 (reboot 247): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#7684130#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 15:23:31.966 (reboot 247): found_usb_device, loc=usb:0/140000/0/5/1/1 Port_#0001.Hub_#0009 15:23:31.966 (reboot 247): found_usb_device, devinst=00000005 15:23:31.966 (reboot 247): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0280 15:23:31.966 (reboot 247): add: loc=usb:0/140000/0/5/1/1, class=Ports, vid=16C0, pid=0483, ver=0280, serial=7684130, dev=\\?\usb#vid_16c0&pid_0483#7684130#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 15:23:31.966 (reboot 247): comport_from_devinst_list attempt 15:23:31.966 (reboot 247): found Ports in classguid_list at index=0 15:23:31.966 (reboot 247): port COM29 found from devnode 15:23:31.966 (reboot 247): found_usb_device complete 15:23:31.973 (loader): remote connection 3012 opened 15:23:31.973 (loader): remote cmd from 3012: "show:arduino_attempt_reboot" 15:23:31.973 (loader): got request to show arduino rebooting message 15:23:31.974 (reboot 247): found Teensy Loader, version 1.52 15:23:31.974 (reboot 247): Sending command: show:arduino_attempt_reboot 15:23:31.976 (reboot 247): Sending command: comment: Teensyduino 1.52 - WINDOWS (teensy_reboot) 15:23:31.976 (loader): remote cmd from 3012: "comment: Teensyduino 1.52 - WINDOWS (teensy_reboot)" 15:23:31.976 (loader): remote cmd from 3012: "status" 15:23:31.978 (reboot 247): Status: 1, 1, 0, 105, 4, 0, T:\TEMP\arduino_build_547525\, YieldTest.ino.hex 15:23:31.978 (reboot 247): do_reset (serial) COM29 15:23:31.980 (loader): remote cmd from 3012: "status" 15:23:31.982 (reboot 247): Status: 1, 1, 0, 105, 4, 0, T:\TEMP\arduino_build_547525\, YieldTest.ino.hex 15:23:31.982 (reboot 247): status read, retry 0 15:23:32.011 (ports 2): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 15:23:32.011 (ports 197): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 15:23:32.013 (ports 2): remove: loc=usb:0/140000/0/5/1/1 15:23:32.013 (ports 2): usb_remove: usb:0/140000/0/5/1/1 15:23:32.013 (ports 2): nothing new, skipping HID & Ports enum 15:23:32.013 (ports 197): remove: loc=usb:0/140000/0/5/1/1 15:23:32.013 (ports 197): usb_remove: usb:0/140000/0/5/1/1 15:23:32.013 (ports 197): nothing new, skipping HID & Ports enum 15:23:32.031 (ports 197): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 15:23:32.032 (ports 197): nothing new, skipping HID & Ports enum 15:23:32.035 (ports 197): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 15:23:32.035 (ports 197): nothing new, skipping HID & Ports enum 15:23:32.047 (ports 2): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 15:23:32.048 (ports 2): nothing new, skipping HID & Ports enum 15:23:32.050 (ports 2): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 15:23:32.051 (ports 2): nothing new, skipping HID & Ports enum 15:23:32.083 (loader): remote cmd from 3012: "status" 15:23:32.085 (reboot 247): Status: 1, 1, 0, 105, 4, 0, T:\TEMP\arduino_build_547525\, YieldTest.ino.hex 15:23:32.085 (reboot 247): status read, retry 1 15:23:32.185 (loader): remote cmd from 3012: "status" 15:23:32.188 (reboot 247): Status: 1, 1, 0, 105, 4, 0, T:\TEMP\arduino_build_547525\, YieldTest.ino.hex 15:23:32.188 (reboot 247): status read, retry 2 15:23:32.221 (ports 2): WM_DEVICECHANGE DBT_DEVICEARRIVAL 15:23:32.221 (ports 197): WM_DEVICECHANGE DBT_DEVICEARRIVAL 15:23:32.223 (ports 197): found_usb_device, id=\\?\usb#vid_16c0&pid_0478#000bb99d#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 15:23:32.223 (ports 197): found_usb_device, loc=usb:0/140000/0/5/1/1 Port_#0001.Hub_#0009 15:23:32.223 (ports 197): found_usb_device, hwid=USB\VID_16C0&PID_0478&REV_0105 15:23:32.223 (ports 197): found_usb_device, devinst=00000020 15:23:32.223 (ports 197): add: loc=usb:0/140000/0/5/1/1, class=HID, vid=16C0, pid=0478, ver=0105, serial=000bb99d, dev=\\?\usb#vid_16c0&pid_0478#000bb99d#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 15:23:32.223 (ports 197): hiddev_from_devinst_list: iface=0 15:23:32.223 (ports 2): found_usb_device, id=\\?\usb#vid_16c0&pid_0478#000bb99d#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 15:23:32.223 (ports 2): found_usb_device, loc=usb:0/140000/0/5/1/1 Port_#0001.Hub_#0009 15:23:32.223 (ports 2): found_usb_device, hwid=USB\VID_16C0&PID_0478&REV_0105 15:23:32.223 (ports 2): found_usb_device, devinst=00000024 15:23:32.223 (ports 2): add: loc=usb:0/140000/0/5/1/1, class=HID, vid=16C0, pid=0478, ver=0105, serial=000bb99d, dev=\\?\usb#vid_16c0&pid_0478#000bb99d#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 15:23:32.224 (ports 2): hiddev_from_devinst_list: iface=0 15:23:32.224 (ports 197): found_usb_device complete 15:23:32.225 (ports 2): found_usb_device complete 15:23:32.226 (ports 197): usb_add: usb:0/140000/0/5/1/1 [no_device] (Teensy 4.1) Bootloader 15:23:32.226 (ports 2): usb_add: usb:0/140000/0/5/1/1 [no_device] (Teensy 4.1) Bootloader 15:23:32.288 (loader): remote cmd from 3012: "status" 15:23:32.289 (loader): Device came online, code_size = 8126464 15:23:32.289 (loader): Board is: Teensy 4.1 (IMXRT1062), version 1.05 15:23:32.303 (loader): File "YieldTest.ino.hex". 36012 bytes, 0% used 15:23:32.304 (loader): set background IMG_ONLINE 15:23:32.318 (loader): File "YieldTest.ino.hex". 36012 bytes, 0% used 15:23:32.320 (loader): elf appears to be for Teensy 4.1 (IMXRT1062) (8126464 bytes) 15:23:32.320 (loader): elf binary data matches hex file 15:23:32.320 (loader): elf file is for Teensy 4.1 (IMXRT1062) 15:23:32.320 (loader): begin operation 15:23:32.331 (reboot 247): Status: 1, 1, 1, 106, 4, 1, T:\TEMP\arduino_build_547525\, YieldTest.ino.hex 15:23:32.344 (loader): flash, block=0, bs=1024, auto=1 15:23:32.344 (loader): gauge old value = 0 15:23:32.344 (loader): flash, block=1, bs=1024, auto=1 15:23:32.408 (ports 197): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 15:23:32.410 (ports 197): update_usb_device, devinst list change, old had 1, new has 2 15:23:32.410 (ports 197): hiddev_from_devinst_list: iface=0 15:23:32.412 (ports 197): hid, found devinst=00000021 15:23:32.412 (ports 197): hid, path=\\?\hid#vid_16c0&pid_0478#8&20f42858&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 15:23:32.412 (ports 197): hid, opened handle 15:23:32.412 (ports 197): devinst=00000021, location=usb:0/140000/0/5/1/1 15:23:32.412 (ports 197): vid=16C0, pid=0478, ver=0105, usepage=FF9C, use=0025 15:23:32.412 (ports 197): devpath=\\?\hid#vid_16c0&pid_0478#8&20f42858&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 15:23:32.412 (ports 197): usb_add: usb:0/140000/0/5/1/1 hid#vid_16c0&pid_0478 (Teensy 4.1) Bootloader 15:23:32.530 (loader): gauge old value = 1 15:23:32.530 (loader): remote cmd from 3012: "status" 15:23:32.531 (reboot 247): Status: 1, 1, 1, 106, 4, 1, T:\TEMP\arduino_build_547525\, YieldTest.ino.hex 15:23:32.531 (loader): flash, block=2, bs=1024, auto=1 15:23:32.531 (loader): gauge old value = 2 15:23:32.531 (loader): flash, block=3, bs=1024, auto=1 15:23:32.531 (loader): gauge old value = 3 15:23:32.532 (loader): flash, block=4, bs=1024, auto=1 15:23:32.532 (loader): gauge old value = 4 15:23:32.537 (loader): flash, block=5, bs=1024, auto=1 15:23:32.537 (loader): gauge old value = 5 15:23:32.539 (loader): flash, block=6, bs=1024, auto=1 15:23:32.539 (loader): gauge old value = 6 15:23:32.541 (loader): flash, block=7, bs=1024, auto=1 15:23:32.541 (loader): gauge old value = 7 15:23:32.544 (loader): flash, block=8, bs=1024, auto=1 15:23:32.544 (loader): gauge old value = 8 15:23:32.549 (loader): flash, block=9, bs=1024, auto=1 15:23:32.549 (loader): gauge old value = 9 15:23:32.551 (loader): flash, block=10, bs=1024, auto=1 15:23:32.552 (loader): gauge old value = 10 15:23:32.553 (loader): flash, block=11, bs=1024, auto=1 15:23:32.554 (loader): gauge old value = 11 15:23:32.555 (loader): flash, block=12, bs=1024, auto=1 15:23:32.555 (loader): gauge old value = 12 15:23:32.557 (loader): flash, block=13, bs=1024, auto=1 15:23:32.557 (loader): gauge old value = 13 15:23:32.559 (loader): flash, block=14, bs=1024, auto=1 15:23:32.559 (loader): gauge old value = 14 15:23:32.560 (loader): flash, block=15, bs=1024, auto=1 15:23:32.561 (loader): gauge old value = 15 15:23:32.562 (loader): flash, block=16, bs=1024, auto=1 15:23:32.563 (loader): gauge old value = 16 15:23:32.564 (loader): flash, block=17, bs=1024, auto=1 15:23:32.564 (loader): gauge old value = 17 15:23:32.565 (loader): flash, block=18, bs=1024, auto=1 15:23:32.566 (loader): gauge old value = 18 15:23:32.567 (loader): flash, block=19, bs=1024, auto=1 15:23:32.568 (loader): gauge old value = 19 15:23:32.569 (loader): flash, block=20, bs=1024, auto=1 15:23:32.569 (loader): gauge old value = 20 15:23:32.574 (loader): flash, block=21, bs=1024, auto=1 15:23:32.574 (loader): gauge old value = 21 15:23:32.577 (loader): flash, block=22, bs=1024, auto=1 15:23:32.577 (loader): gauge old value = 22 15:23:32.580 (loader): flash, block=23, bs=1024, auto=1 15:23:32.580 (loader): gauge old value = 23 15:23:32.581 (loader): remote cmd from 3012: "status" 15:23:32.581 (loader): flash, block=24, bs=1024, auto=1 15:23:32.581 (reboot 247): Status: 1, 1, 1, 106, 4, 1, T:\TEMP\arduino_build_547525\, YieldTest.ino.hex 15:23:32.582 (loader): gauge old value = 24 15:23:32.583 (loader): flash, block=25, bs=1024, auto=1 15:23:32.584 (loader): gauge old value = 25 15:23:32.585 (loader): flash, block=26, bs=1024, auto=1 15:23:32.585 (loader): gauge old value = 26 15:23:32.588 (loader): flash, block=27, bs=1024, auto=1 15:23:32.588 (loader): gauge old value = 27 15:23:32.596 (loader): flash, block=28, bs=1024, auto=1 15:23:32.596 (loader): gauge old value = 28 15:23:32.602 (loader): flash, block=29, bs=1024, auto=1 15:23:32.602 (loader): gauge old value = 29 15:23:32.607 (loader): flash, block=30, bs=1024, auto=1 15:23:32.607 (loader): gauge old value = 30 15:23:32.618 (loader): flash, block=31, bs=1024, auto=1 15:23:32.618 (loader): gauge old value = 31 15:23:32.626 (loader): flash, block=32, bs=1024, auto=1 15:23:32.626 (loader): gauge old value = 32 15:23:32.632 (loader): flash, block=33, bs=1024, auto=1 15:23:32.632 (loader): gauge old value = 33 15:23:32.636 (loader): remote cmd from 3012: "status" 15:23:32.637 (reboot 247): Status: 1, 1, 1, 106, 4, 1, T:\TEMP\arduino_build_547525\, YieldTest.ino.hex 15:23:32.657 (loader): flash, block=34, bs=1024, auto=1 15:23:32.658 (loader): gauge old value = 34 15:23:32.659 (ports 197): callback C159 15:23:32.662 (loader): flash, block=35, bs=1024, auto=1 15:23:32.662 (loader): gauge old value = 35 15:23:32.674 (loader): sending reboot 15:23:32.674 (loader): begin wait_until_offline 15:23:32.678 (ports 2): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 15:23:32.678 (ports 197): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 15:23:32.680 (ports 2): remove: loc=usb:0/140000/0/5/1/1 15:23:32.680 (ports 2): usb_remove: usb:0/140000/0/5/1/1 15:23:32.680 (ports 2): nothing new, skipping HID & Ports enum 15:23:32.680 (ports 197): remove: loc=usb:0/140000/0/5/1/1 15:23:32.680 (ports 197): usb_remove: usb:0/140000/0/5/1/1 15:23:32.680 (ports 197): nothing new, skipping HID & Ports enum 15:23:32.725 (loader): offline, waited 1 15:23:32.725 (loader): end operation, total time = 0.406 seconds 15:23:32.726 (loader): set background IMG_REBOOT_OK 15:23:32.728 (loader): redraw timer set, image 14 to show for 1200 ms 15:23:32.729 (loader): remote cmd from 3012: "status" 15:23:32.730 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 15:23:32.730 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 15:23:32.730 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 15:23:32.730 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 15:23:32.730 (loader): HID/win32: vid:046D pid:C534 ver:2901 15:23:32.730 (loader): HID/win32: vid:046D pid:C534 ver:2901 15:23:32.730 (loader): HID/win32: vid:046D pid:C534 ver:2901 15:23:32.730 (loader): HID/win32: vid:046D pid:C534 ver:2901 15:23:32.731 (loader): HID/win32: vid:0764 pid:0501 ver:0001 15:23:32.732 (reboot 247): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_547525\, YieldTest.ino.hex 15:23:32.732 (reboot 247): status read, retry 3 15:23:32.732 (reboot 247): Success 15:23:32.732 (reboot 247): Disconnect 15:23:32.743 (loader): remote connection 3012 closed 15:23:32.745 (loader): remote connection 3052 closed 15:23:32.847 (serialmon 248): Begin, version=1.52, high-res time 15:23:32.847 (serialmon 248): listening for location: usb:0/140000/0/5/1/1 15:23:32.847 (serialmon 248): LoadLibrary cfgmgr32 ok 15:23:32.847 (serialmon 248): LoadLibrary ntdll ok 15:23:32.853 (serialmon 248): callback 0024 15:23:32.853 (serialmon 248): callback 0081 15:23:32.859 (serialmon 248): callback 0083 15:23:32.861 (serialmon 248): hWnd = 2298914 15:23:32.861 (serialmon 248): loop stdin, ready=262143 15:23:32.865 (serialmon 248): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 15:23:32.865 (serialmon 248): found_usb_device, loc=usb:0/140000/0/5/2 Port_#0002.Hub_#0006 15:23:32.865 (serialmon 248): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0280 15:23:32.865 (serialmon 248): found_usb_device, devinst=00000003 15:23:32.865 (serialmon 248): add: loc=usb:0/140000/0/5/2, class=Ports, vid=16C0, pid=0483, ver=0280, serial=1000380, dev=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 15:23:32.865 (serialmon 248): comport_from_devinst_list attempt 15:23:32.865 (serialmon 248): found Ports in classguid_list at index=0 15:23:32.865 (serialmon 248): port COM17 found from devnode 15:23:32.865 (serialmon 248): found_usb_device complete 15:23:32.867 (serialmon 248): usb_add: usb:0/140000/0/5/2 15:23:32.872 (loader): remote connection 3052 opened 15:23:32.929 (ports 2): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 15:23:32.929 (ports 2): callback C159 15:23:32.930 (ports 2): nothing new, skipping HID & Ports enum 15:23:32.950 (serialmon 248): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 15:23:32.951 (serialmon 248): nothing new, skipping HID & Ports enum 15:23:32.957 (ports 197): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 15:23:32.957 (ports 197): nothing new, skipping HID & Ports enum 15:23:32.964 (ports 2): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 15:23:32.965 (ports 2): nothing new, skipping HID & Ports enum 15:23:32.998 (serialmon 248): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 15:23:32.998 (serialmon 248): nothing new, skipping HID & Ports enum 15:23:32.999 (ports 197): WM_DEVICECHANGE DBT_DEVICEARRIVAL 15:23:32.999 (ports 2): WM_DEVICECHANGE DBT_DEVICEARRIVAL 15:23:33.000 (serialmon 248): WM_DEVICECHANGE DBT_DEVICEARRIVAL 15:23:33.001 (ports 197): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#7684130#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 15:23:33.001 (ports 197): found_usb_device, loc=usb:0/140000/0/5/1/1 Port_#0001.Hub_#0009 15:23:33.001 (ports 197): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0280 15:23:33.001 (ports 197): found_usb_device, devinst=00000006 15:23:33.001 (ports 197): add: loc=usb:0/140000/0/5/1/1, class=Ports, vid=16C0, pid=0483, ver=0280, serial=7684130, dev=\\?\usb#vid_16c0&pid_0483#7684130#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 15:23:33.001 (ports 197): comport_from_devinst_list attempt 15:23:33.001 (ports 197): found Ports in classguid_list at index=0 15:23:33.001 (ports 2): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#7684130#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 15:23:33.001 (ports 2): found_usb_device, loc=usb:0/140000/0/5/1/1 Port_#0001.Hub_#0009 15:23:33.001 (ports 197): port COM29 found from devnode 15:23:33.001 (ports 197): found_usb_device complete 15:23:33.001 (ports 2): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0280 15:23:33.001 (ports 2): found_usb_device, devinst=00000022 15:23:33.001 (ports 2): add: loc=usb:0/140000/0/5/1/1, class=Ports, vid=16C0, pid=0483, ver=0280, serial=7684130, dev=\\?\usb#vid_16c0&pid_0483#7684130#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 15:23:33.001 (ports 2): comport_from_devinst_list attempt 15:23:33.001 (ports 2): found Ports in classguid_list at index=0 15:23:33.001 (ports 2): port COM29 found from devnode 15:23:33.001 (ports 2): found_usb_device complete 15:23:33.002 (serialmon 248): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#7684130#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 15:23:33.002 (serialmon 248): found_usb_device, loc=usb:0/140000/0/5/1/1 Port_#0001.Hub_#0009 15:23:33.002 (serialmon 248): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0280 15:23:33.002 (serialmon 248): found_usb_device, devinst=0000001d 15:23:33.002 (serialmon 248): add: loc=usb:0/140000/0/5/1/1, class=Ports, vid=16C0, pid=0483, ver=0280, serial=7684130, dev=\\?\usb#vid_16c0&pid_0483#7684130#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 15:23:33.002 (serialmon 248): comport_from_devinst_list attempt 15:23:33.002 (serialmon 248): found Ports in classguid_list at index=0 15:23:33.002 (ports 197): usb_add: usb:0/140000/0/5/1/1 COM29 (Teensy 4.1) Serial 15:23:33.002 (serialmon 248): port COM29 found from devnode 15:23:33.002 (serialmon 248): found_usb_device complete 15:23:33.002 (ports 2): usb_add: usb:0/140000/0/5/1/1 COM29 (Teensy 4.1) Serial 15:23:33.004 (serialmon 248): usb_add: usb:0/140000/0/5/1/1 15:23:33.004 (serialmon 248): translate "COM29" -> "\\.\COM29" 15:23:33.015 (ports 197): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 15:23:33.016 (ports 197): nothing new, skipping HID & Ports enum 15:23:33.029 (ports 2): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 15:23:33.030 (ports 2): nothing new, skipping HID & Ports enum 15:23:33.185 (serialmon 248): GetDefaultCommConfig success 15:23:33.362 (serialmon 248): SetDefaultCommConfig success 15:23:33.362 (serialmon 248): Opened \\.\COM29 Serial 15:23:33.364 (ports 197): callback 001A 15:23:33.364 (ports 2): callback 001A 15:23:33.366 (serialmon 248): WM_DEVICECHANGE DBT_DEVICEARRIVAL 15:23:33.367 (serialmon 248): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 15:23:33.371 (serialmon 248): callback 001A 15:23:33.375 (serialmon 248): nothing new, skipping HID & Ports enum 15:23:33.917 (loader): redraw, image 9 15:23:34.026 (ports 197): WM_DEVICECHANGE DBT_DEVICEARRIVAL 15:23:34.026 (ports 197): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 15:23:34.028 (ports 197): nothing new, skipping HID & Ports enum 15:23:34.704 (ports 2): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 15:23:34.704 (ports 2): WM_DEVICECHANGE DBT_DEVICEARRIVAL 15:23:34.706 (ports 2): nothing new, skipping HID & Ports enum 15:23:34.945 (serialmon 248): callback C159 15:23:34.948 (ports 197): callback C159 15:23:34.956 (ports 2): callback C159 15:23:36.967 (serialmon 248): callback C159 15:23:36.970 (ports 197): callback C159 15:23:36.976 (ports 2): callback C159 15:23:38.987 (serialmon 248): callback C159 15:23:38.990 (ports 197): callback C159 ... 15:59:19.599 (serialmon 248): callback C159 15:59:19.602 (ports 197): callback C159 15:59:19.754 (ports 2): callback C159 15:59:21.767 (serialmon 248): callback C159 15:59:21.771 (ports 197): callback C159 15:59:21.828 (ports 2): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 15:59:21.829 (serialmon 248): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 15:59:21.829 (ports 197): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 15:59:21.830 (ports 2): remove: loc=usb:0/140000/0/5/2 15:59:21.830 (ports 2): usb_remove: usb:0/140000/0/5/2 15:59:21.830 (ports 2): nothing new, skipping HID & Ports enum 15:59:21.830 (serialmon 248): remove: loc=usb:0/140000/0/5/2 15:59:21.830 (serialmon 248): usb_remove: usb:0/140000/0/5/2 15:59:21.831 (ports 197): remove: loc=usb:0/140000/0/5/2 15:59:21.831 (ports 197): usb_remove: usb:0/140000/0/5/2 15:59:21.831 (ports 197): nothing new, skipping HID & Ports enum 15:59:21.852 (serialmon 248): nothing new, skipping HID & Ports enum 15:59:21.853 (serialmon 248): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 15:59:21.853 (serialmon 248): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 15:59:21.854 (serialmon 248): nothing new, skipping HID & Ports enum 15:59:21.861 (ports 197): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 15:59:21.862 (ports 197): nothing new, skipping HID & Ports enum 15:59:21.862 (ports 197): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 15:59:21.863 (ports 197): nothing new, skipping HID & Ports enum 15:59:23.192 (ports 2): callback C159 15:59:23.192 (ports 2): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 15:59:23.192 (ports 2): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 15:59:23.193 (ports 2): nothing new, skipping HID & Ports enum 15:59:23.470 (ports 197): purge, name=COM17 (Teensy 4.1) Serial, loc=usb:0/140000/0/5/2, age=1.639 sec 15:59:23.496 (ports 2): purge, name=COM17 (Teensy 4.1) Serial, loc=usb:0/140000/0/5/2, age=1.666 sec 15:59:25.229 (serialmon 248): callback C159 15:59:25.232 (ports 197): callback C159 15:59:25.238 (ports 2): callback C159 15:59:27.248 (serialmon 248): callback C159 15:59:27.252 (ports 197): callback C159 15:59:29.348 (ports 2): callback C159 15:59:31.362 (serialmon 248): callback C159 15:59:31.366 (ports 197): callback C159 15:59:31.371 (ports 2): callback C159 15:59:33.381 (serialmon 248): callback C159 15:59:33.384 (ports 197): callback C159 15:59:33.588 (ports 2): callback C159 ... 16:01:20.951 (serialmon 248): callback C159 16:01:20.956 (ports 197): callback C159 16:01:21.755 (ports 2): callback C159 16:01:21.879 (ports 2): WM_DEVICECHANGE DBT_DEVICEARRIVAL 16:01:21.879 (serialmon 248): WM_DEVICECHANGE DBT_DEVICEARRIVAL 16:01:21.879 (ports 197): WM_DEVICECHANGE DBT_DEVICEARRIVAL 16:01:21.880 (serialmon 248): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:01:21.880 (serialmon 248): found_usb_device, loc=usb:0/140000/0/5/2 Port_#0002.Hub_#0006 16:01:21.880 (serialmon 248): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0280 16:01:21.880 (serialmon 248): found_usb_device, devinst=00000003 16:01:21.880 (serialmon 248): add: loc=usb:0/140000/0/5/2, class=Ports, vid=16C0, pid=0483, ver=0280, serial=1000380, dev=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:01:21.880 (serialmon 248): comport_from_devinst_list attempt 16:01:21.880 (serialmon 248): found Ports in classguid_list at index=0 16:01:21.880 (serialmon 248): port COM17 found from devnode 16:01:21.880 (serialmon 248): found_usb_device complete 16:01:21.880 (ports 2): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:01:21.880 (ports 2): found_usb_device, loc=usb:0/140000/0/5/2 Port_#0002.Hub_#0006 16:01:21.880 (ports 2): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0280 16:01:21.880 (ports 2): found_usb_device, devinst=00000021 16:01:21.880 (ports 2): add: loc=usb:0/140000/0/5/2, class=Ports, vid=16C0, pid=0483, ver=0280, serial=1000380, dev=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:01:21.880 (ports 2): comport_from_devinst_list attempt 16:01:21.880 (ports 2): found Ports in classguid_list at index=0 16:01:21.880 (ports 2): port COM17 found from devnode 16:01:21.880 (ports 2): found_usb_device complete 16:01:21.880 (ports 197): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:01:21.880 (ports 197): found_usb_device, loc=usb:0/140000/0/5/2 Port_#0002.Hub_#0006 16:01:21.880 (ports 197): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0280 16:01:21.880 (ports 197): found_usb_device, devinst=00000004 16:01:21.880 (ports 197): add: loc=usb:0/140000/0/5/2, class=Ports, vid=16C0, pid=0483, ver=0280, serial=1000380, dev=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:01:21.880 (ports 197): comport_from_devinst_list attempt 16:01:21.880 (ports 197): found Ports in classguid_list at index=0 16:01:21.881 (ports 197): port COM17 found from devnode 16:01:21.881 (ports 197): found_usb_device complete 16:01:21.882 (serialmon 248): found new COM port, devinst=0000001D 16:01:21.882 (serialmon 248): portname=COM29 16:01:21.882 (serialmon 248): usb_add: usb:0/140000/0/5/2 16:01:21.882 (ports 2): usb_add: usb:0/140000/0/5/2 COM17 (Teensy 4.1) Serial 16:01:21.883 (ports 197): usb_add: usb:0/140000/0/5/2 COM17 (Teensy 4.1) Serial 16:01:21.883 (serialmon 248): usb_add: usb:0/140000/0/5/1/1 16:01:21.883 (serialmon 248): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 16:01:21.885 (serialmon 248): nothing new, skipping HID & Ports enum 16:01:21.892 (serialmon 248): WM_DEVICECHANGE DBT_DEVICEARRIVAL 16:01:21.893 (serialmon 248): nothing new, skipping HID & Ports enum 16:01:21.899 (ports 197): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 16:01:21.900 (ports 197): nothing new, skipping HID & Ports enum 16:01:21.902 (ports 197): WM_DEVICECHANGE DBT_DEVICEARRIVAL 16:01:21.903 (ports 197): nothing new, skipping HID & Ports enum 16:01:21.912 (ports 2): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 16:01:21.913 (ports 2): nothing new, skipping HID & Ports enum 16:01:21.915 (ports 2): WM_DEVICECHANGE DBT_DEVICEARRIVAL 16:01:21.916 (ports 2): nothing new, skipping HID & Ports enum 16:01:21.937 (serialmon 248): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 16:01:21.938 (serialmon 248): nothing new, skipping HID & Ports enum 16:01:21.945 (ports 197): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 16:01:21.946 (ports 197): nothing new, skipping HID & Ports enum 16:01:22.095 (ports 2): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 16:01:22.096 (ports 2): nothing new, skipping HID & Ports enum 16:01:23.773 (ports 197): callback C159 16:01:23.779 (ports 2): callback C159 16:01:25.802 (ports 197): callback C159 16:01:25.811 (ports 2): callback C159 16:01:27.830 (ports 197): callback C159 ... 16:05:59.873 (ports 197): callback C159 16:05:59.878 (ports 2): callback C159 16:06:01.893 (ports 197): callback C159 16:06:01.931 (post_compile 249): Begin, version=1.52, high-res time 16:06:01.936 (loader): remote connection 3340 opened 16:06:01.936 (loader): remote cmd from 3340: "comment: Teensyduino 1.52 - WINDOWS (teensy_post_compile)" 16:06:01.936 (loader): remote cmd from 3340: "status" 16:06:01.936 (post_compile 249): Sending command: comment: Teensyduino 1.52 - WINDOWS (teensy_post_compile) 16:06:01.938 (loader): remote cmd from 3340: "dir:T:\TEMP\arduino_build_986240\" 16:06:01.938 (loader): remote cmd from 3340: "file:SerialEventsTest.ino.hex" 16:06:01.938 (post_compile 249): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_547525\, YieldTest.ino.hex 16:06:01.938 (post_compile 249): Sending command: dir:T:\TEMP\arduino_build_986240\ 16:06:01.939 (post_compile 249): Sending command: file:SerialEventsTest.ino.hex 16:06:01.949 (loader): File "SerialEventsTest.ino.hex". 17332 bytes, 0% used 16:06:01.954 (loader): remote cmd from 3340: "status" 16:06:01.956 (post_compile 249): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:06:01.956 (post_compile 249): Disconnect 16:06:01.967 (loader): remote connection 3340 closed 16:06:02.077 (ports 2): callback C159 16:06:04.096 (ports 197): callback C159 16:06:04.101 (ports 2): callback C159 ... 16:09:42.262 (ports 2): callback C159 16:09:44.278 (ports 197): callback C159 16:09:44.284 (ports 2): callback C159 16:09:46.299 (ports 197): callback C159 16:09:46.436 (ports 2): callback C159 16:09:47.251 (loader): remote connection 3052 closed 16:09:48.448 (ports 197): callback C159 16:09:48.455 (ports 2): callback C159 16:09:49.645 (loader): remote connection 3596 opened 16:09:49.645 (loader): remote cmd from 3596: "comment: Teensyduino 1.52 - WINDOWS (teensy_post_compile)" 16:09:49.645 (loader): remote cmd from 3596: "status" 16:09:49.645 (loader): file changed 16:09:49.650 (post_compile 250): Begin, version=1.52, high-res time 16:09:49.655 (post_compile 250): Sending command: comment: Teensyduino 1.52 - WINDOWS (teensy_post_compile) 16:09:49.660 (loader): File "SerialEventsTest.ino.hex". 37740 bytes, 0% used 16:09:49.660 (loader): remote cmd from 3596: "dir:T:\TEMP\arduino_build_986240\" 16:09:49.660 (loader): remote cmd from 3596: "file:SerialEventsTest.ino.hex" 16:09:49.671 (post_compile 250): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:49.671 (post_compile 250): Sending command: dir:T:\TEMP\arduino_build_986240\ 16:09:49.675 (post_compile 250): Sending command: file:SerialEventsTest.ino.hex 16:09:49.676 (loader): File "SerialEventsTest.ino.hex". 37740 bytes, 0% used 16:09:49.676 (loader): remote cmd from 3596: "status" 16:09:49.692 (post_compile 250): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:49.692 (post_compile 250): Disconnect 16:09:49.707 (loader): remote connection 3596 closed 16:09:49.932 (loader): remote connection 3600 opened 16:09:49.932 (loader): remote cmd from 3600: "comment: Teensyduino 1.52 - WINDOWS (teensy_post_compile)" 16:09:49.932 (loader): remote cmd from 3600: "status" 16:09:49.932 (loader): remote cmd from 3600: "dir:T:\TEMP\arduino_build_986240\" 16:09:49.932 (loader): remote cmd from 3600: "file:SerialEventsTest.ino.hex" 16:09:49.932 (post_compile 251): Begin, version=1.52, high-res time 16:09:49.937 (post_compile 251): Sending command: comment: Teensyduino 1.52 - WINDOWS (teensy_post_compile) 16:09:49.939 (post_compile 251): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:49.939 (post_compile 251): Sending command: dir:T:\TEMP\arduino_build_986240\ 16:09:49.939 (post_compile 251): Sending command: file:SerialEventsTest.ino.hex 16:09:49.947 (loader): File "SerialEventsTest.ino.hex". 37740 bytes, 0% used 16:09:49.947 (loader): remote cmd from 3600: "status" 16:09:49.957 (post_compile 251): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:49.957 (post_compile 251): Disconnect 16:09:49.979 (loader): remote connection 3600 closed 16:09:49.979 (loader): remote connection 3600 opened 16:09:49.979 (post_compile 252): Running teensy_reboot: "T:\arduino-1.8.12H\hardware\teensy\..\tools\teensy_reboot.exe" teensy_reboot.exe "-board=TEENSY41" "-port=usb:0/140000/0/5/1/1" "-portlabel=hid#vid_16c0&pid_0478 Bootloader" "-portprotocol=Teensy" 16:09:50.003 (reboot 253): Begin, version=1.52, high-res time 16:09:50.003 (reboot 253): location = usb:0/140000/0/5/1/1 16:09:50.003 (reboot 253): portprotocol = Teensy 16:09:50.003 (reboot 253): portlabel = hid#vid_16c0&pid_0478 Bootloader 16:09:50.003 (reboot 253): Only location usb:0/140000/0/5/1/1 will be tried 16:09:50.003 (reboot 253): LoadLibrary cfgmgr32 ok 16:09:50.003 (reboot 253): LoadLibrary ntdll ok 16:09:50.005 (reboot 253): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:09:50.005 (reboot 253): found_usb_device, loc=usb:0/140000/0/5/2 Port_#0002.Hub_#0006 16:09:50.005 (reboot 253): found_usb_device, devinst=00000003 16:09:50.005 (reboot 253): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0280 16:09:50.005 (reboot 253): add: loc=usb:0/140000/0/5/2, class=Ports, vid=16C0, pid=0483, ver=0280, serial=1000380, dev=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:09:50.006 (reboot 253): comport_from_devinst_list attempt 16:09:50.006 (reboot 253): found Ports in classguid_list at index=0 16:09:50.006 (reboot 253): port COM17 found from devnode 16:09:50.006 (reboot 253): found_usb_device complete 16:09:50.006 (reboot 253): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#7684130#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:09:50.006 (reboot 253): found_usb_device, loc=usb:0/140000/0/5/1/1 Port_#0001.Hub_#0009 16:09:50.006 (reboot 253): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0280 16:09:50.006 (reboot 253): found_usb_device, devinst=00000005 16:09:50.006 (reboot 253): add: loc=usb:0/140000/0/5/1/1, class=Ports, vid=16C0, pid=0483, ver=0280, serial=7684130, dev=\\?\usb#vid_16c0&pid_0483#7684130#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:09:50.006 (reboot 253): comport_from_devinst_list attempt 16:09:50.006 (reboot 253): found Ports in classguid_list at index=0 16:09:50.006 (reboot 253): port COM29 found from devnode 16:09:50.006 (reboot 253): found_usb_device complete 16:09:50.010 (loader): remote connection 3596 opened 16:09:50.010 (loader): remote cmd from 3596: "show:arduino_attempt_reboot" 16:09:50.010 (loader): got request to show arduino rebooting message 16:09:50.010 (loader): remote cmd from 3596: "comment: Teensyduino 1.52 - WINDOWS (teensy_reboot)" 16:09:50.010 (loader): remote cmd from 3596: "status" 16:09:50.010 (loader): remote cmd from 3596: "status" 16:09:50.014 (reboot 253): found Teensy Loader, version 1.52 16:09:50.014 (reboot 253): Sending command: show:arduino_attempt_reboot 16:09:50.017 (reboot 253): Sending command: comment: Teensyduino 1.52 - WINDOWS (teensy_reboot) 16:09:50.020 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:50.020 (reboot 253): do_reset (serial) COM29 16:09:50.024 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:50.024 (reboot 253): status read, retry 0 16:09:50.056 (ports 197): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 16:09:50.057 (ports 2): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 16:09:50.058 (ports 2): remove: loc=usb:0/140000/0/5/1/1 16:09:50.058 (ports 2): usb_remove: usb:0/140000/0/5/1/1 16:09:50.058 (ports 2): nothing new, skipping HID & Ports enum 16:09:50.058 (ports 197): remove: loc=usb:0/140000/0/5/1/1 16:09:50.058 (ports 197): usb_remove: usb:0/140000/0/5/1/1 16:09:50.058 (ports 197): nothing new, skipping HID & Ports enum 16:09:50.078 (ports 197): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 16:09:50.079 (ports 197): nothing new, skipping HID & Ports enum 16:09:50.079 (ports 197): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 16:09:50.080 (ports 197): nothing new, skipping HID & Ports enum 16:09:50.090 (ports 2): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 16:09:50.092 (ports 2): nothing new, skipping HID & Ports enum 16:09:50.092 (ports 2): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 16:09:50.093 (ports 2): nothing new, skipping HID & Ports enum 16:09:50.135 (loader): remote cmd from 3596: "status" 16:09:50.137 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:50.137 (reboot 253): status read, retry 1 16:09:50.243 (loader): remote cmd from 3596: "status" 16:09:50.245 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:50.245 (reboot 253): status read, retry 2 16:09:50.271 (ports 2): WM_DEVICECHANGE DBT_DEVICEARRIVAL 16:09:50.271 (ports 197): WM_DEVICECHANGE DBT_DEVICEARRIVAL 16:09:50.273 (ports 197): found_usb_device, id=\\?\usb#vid_16c0&pid_0478#000bb99d#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:09:50.273 (ports 197): found_usb_device, loc=usb:0/140000/0/5/1/1 Port_#0001.Hub_#0009 16:09:50.273 (ports 197): found_usb_device, hwid=USB\VID_16C0&PID_0478&REV_0105 16:09:50.273 (ports 197): found_usb_device, devinst=00000020 16:09:50.273 (ports 197): add: loc=usb:0/140000/0/5/1/1, class=HID, vid=16C0, pid=0478, ver=0105, serial=000bb99d, dev=\\?\usb#vid_16c0&pid_0478#000bb99d#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:09:50.274 (ports 197): hiddev_from_devinst_list: iface=0 16:09:50.274 (ports 2): found_usb_device, id=\\?\usb#vid_16c0&pid_0478#000bb99d#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:09:50.274 (ports 2): found_usb_device, loc=usb:0/140000/0/5/1/1 Port_#0001.Hub_#0009 16:09:50.274 (ports 2): found_usb_device, hwid=USB\VID_16C0&PID_0478&REV_0105 16:09:50.274 (ports 2): found_usb_device, devinst=00000024 16:09:50.274 (ports 2): add: loc=usb:0/140000/0/5/1/1, class=HID, vid=16C0, pid=0478, ver=0105, serial=000bb99d, dev=\\?\usb#vid_16c0&pid_0478#000bb99d#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:09:50.274 (ports 2): hiddev_from_devinst_list: iface=0 16:09:50.275 (ports 197): found_usb_device complete 16:09:50.275 (ports 2): found_usb_device complete 16:09:50.276 (ports 197): usb_add: usb:0/140000/0/5/1/1 [no_device] (Teensy 4.1) Bootloader 16:09:50.277 (ports 2): usb_add: usb:0/140000/0/5/1/1 [no_device] (Teensy 4.1) Bootloader 16:09:50.291 (ports 197): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 16:09:50.291 (ports 2): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 16:09:50.292 (ports 197): remove: loc=usb:0/140000/0/5/1/1 16:09:50.292 (ports 197): usb_remove: usb:0/140000/0/5/1/1 16:09:50.292 (ports 197): nothing new, skipping HID & Ports enum 16:09:50.292 (ports 2): remove: loc=usb:0/140000/0/5/1/1 16:09:50.292 (ports 2): usb_remove: usb:0/140000/0/5/1/1 16:09:50.293 (ports 2): nothing new, skipping HID & Ports enum 16:09:50.337 (ports 197): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 16:09:50.338 (ports 197): nothing new, skipping HID & Ports enum 16:09:50.352 (loader): remote cmd from 3596: "status" 16:09:50.354 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:50.354 (reboot 253): status read, retry 3 16:09:50.461 (loader): remote cmd from 3596: "status" 16:09:50.466 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:50.466 (reboot 253): status read, retry 4 16:09:50.471 (ports 197): callback C159 16:09:50.566 (loader): remote cmd from 3596: "status" 16:09:50.569 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:50.569 (reboot 253): status read, retry 5 16:09:50.669 (loader): remote cmd from 3596: "status" 16:09:50.672 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:50.672 (reboot 253): status read, retry 6 16:09:50.714 (ports 2): callback C159 16:09:50.714 (ports 2): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 16:09:50.716 (ports 2): nothing new, skipping HID & Ports enum 16:09:50.727 (ports 197): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 16:09:50.728 (ports 197): nothing new, skipping HID & Ports enum 16:09:50.733 (ports 2): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 16:09:50.734 (ports 2): nothing new, skipping HID & Ports enum 16:09:50.772 (loader): remote cmd from 3596: "status" 16:09:50.774 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:50.774 (reboot 253): status read, retry 7 16:09:50.874 (loader): remote cmd from 3596: "status" 16:09:50.876 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:50.876 (reboot 253): status read, retry 8 16:09:50.977 (loader): remote cmd from 3596: "status" 16:09:50.979 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:50.979 (reboot 253): status read, retry 9 16:09:51.080 (loader): remote cmd from 3596: "status" 16:09:51.086 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:51.086 (reboot 253): status read, retry 10 16:09:51.186 (loader): remote cmd from 3596: "status" 16:09:51.192 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:51.192 (reboot 253): status read, retry 11 16:09:51.295 (loader): remote cmd from 3596: "status" 16:09:51.297 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:51.297 (reboot 253): status read, retry 12 16:09:51.405 (loader): remote cmd from 3596: "status" 16:09:51.407 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:51.407 (reboot 253): status read, retry 13 16:09:51.508 (loader): remote cmd from 3596: "status" 16:09:51.510 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:51.510 (reboot 253): status read, retry 14 16:09:51.611 (loader): remote cmd from 3596: "status" 16:09:51.613 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:51.613 (reboot 253): status read, retry 15 16:09:51.714 (loader): remote cmd from 3596: "status" 16:09:51.716 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:51.716 (reboot 253): status read, retry 16 16:09:51.816 (loader): remote cmd from 3596: "status" 16:09:51.819 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:51.819 (reboot 253): status read, retry 17 16:09:51.919 (loader): remote cmd from 3596: "status" 16:09:51.921 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:51.921 (reboot 253): status read, retry 18 16:09:51.963 (ports 2): purge, name=[no_device] (Teensy 4.1) Bootloader, loc=usb:0/140000/0/5/1/1, age=1.670 sec 16:09:51.963 (ports 197): purge, name=[no_device] (Teensy 4.1) Bootloader, loc=usb:0/140000/0/5/1/1, age=1.671 sec 16:09:52.022 (loader): remote cmd from 3596: "status" 16:09:52.024 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:52.024 (reboot 253): status read, retry 19 16:09:52.125 (loader): remote cmd from 3596: "status" 16:09:52.127 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:52.127 (reboot 253): status read, retry 20 16:09:52.227 (loader): remote cmd from 3596: "status" 16:09:52.229 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:52.229 (reboot 253): status read, retry 21 16:09:52.340 (loader): remote cmd from 3596: "status" 16:09:52.342 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:52.342 (reboot 253): status read, retry 22 16:09:52.449 (loader): remote cmd from 3596: "status" 16:09:52.451 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:52.451 (reboot 253): status read, retry 23 16:09:52.558 (loader): remote cmd from 3596: "status" 16:09:52.560 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:52.560 (reboot 253): status read, retry 24 16:09:52.668 (loader): remote cmd from 3596: "status" 16:09:52.670 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:52.670 (reboot 253): status read, retry 25 16:09:52.740 (ports 197): callback C159 16:09:52.746 (ports 2): callback C159 16:09:52.777 (loader): remote cmd from 3596: "status" 16:09:52.780 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:52.780 (reboot 253): status read, retry 26 16:09:52.886 (loader): remote cmd from 3596: "status" 16:09:52.888 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:52.888 (reboot 253): status read, retry 27 16:09:52.996 (loader): remote cmd from 3596: "status" 16:09:52.998 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:52.998 (reboot 253): status read, retry 28 16:09:53.105 (loader): remote cmd from 3596: "status" 16:09:53.108 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:53.108 (reboot 253): status read, retry 29 16:09:53.214 (loader): remote cmd from 3596: "status" 16:09:53.216 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:53.216 (reboot 253): status read, retry 30 16:09:53.324 (loader): remote cmd from 3596: "status" 16:09:53.326 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:53.326 (reboot 253): status read, retry 31 16:09:53.433 (loader): remote cmd from 3596: "status" 16:09:53.435 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:53.435 (reboot 253): status read, retry 32 16:09:53.536 (loader): remote cmd from 3596: "status" 16:09:53.538 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:53.538 (reboot 253): status read, retry 33 16:09:53.638 (loader): remote cmd from 3596: "status" 16:09:53.640 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:53.640 (reboot 253): status read, retry 34 16:09:53.741 (loader): remote cmd from 3596: "status" 16:09:53.743 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:53.743 (reboot 253): status read, retry 35 16:09:53.843 (loader): remote cmd from 3596: "status" 16:09:53.846 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:53.846 (reboot 253): status read, retry 36 16:09:53.946 (loader): remote cmd from 3596: "status" 16:09:53.948 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:53.948 (reboot 253): status read, retry 37 16:09:54.049 (loader): remote cmd from 3596: "status" 16:09:54.051 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:54.051 (reboot 253): status read, retry 38 16:09:54.152 (loader): remote cmd from 3596: "status" 16:09:54.154 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:54.154 (reboot 253): status read, retry 39 16:09:54.262 (loader): remote cmd from 3596: "status" 16:09:54.265 (reboot 253): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:09:54.265 (reboot 253): status read, retry 40 16:09:54.372 (reboot 253): Disconnect 16:09:54.387 (loader): remote connection 3596 closed 16:09:54.387 (loader): remote connection 3600 closed 16:09:54.482 (serialmon 254): Begin, version=1.52, high-res time 16:09:54.482 (serialmon 254): listening for location: usb:0/140000/0/5/1/1 16:09:54.482 (serialmon 254): LoadLibrary cfgmgr32 ok 16:09:54.482 (serialmon 254): LoadLibrary ntdll ok 16:09:54.488 (serialmon 254): callback 0024 16:09:54.488 (serialmon 254): callback 0081 16:09:54.491 (serialmon 254): callback 0083 16:09:54.492 (serialmon 254): hWnd = 2626348 16:09:54.493 (serialmon 254): loop stdin, ready=262143 16:09:54.496 (serialmon 254): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:09:54.496 (serialmon 254): found_usb_device, loc=usb:0/140000/0/5/2 Port_#0002.Hub_#0006 16:09:54.496 (serialmon 254): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0280 16:09:54.496 (serialmon 254): found_usb_device, devinst=00000003 16:09:54.496 (serialmon 254): add: loc=usb:0/140000/0/5/2, class=Ports, vid=16C0, pid=0483, ver=0280, serial=1000380, dev=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:09:54.496 (serialmon 254): comport_from_devinst_list attempt 16:09:54.496 (serialmon 254): found Ports in classguid_list at index=0 16:09:54.496 (serialmon 254): port COM17 found from devnode 16:09:54.496 (serialmon 254): found_usb_device complete 16:09:54.498 (serialmon 254): usb_add: usb:0/140000/0/5/2 16:09:54.502 (loader): remote connection 3656 opened 16:09:54.533 (loader): remote connection 3656 closed 16:09:54.762 (ports 197): callback C159 16:09:54.933 (ports 2): callback C159 16:09:56.955 (ports 197): callback C159 16:09:56.961 (ports 2): callback C159 16:09:58.822 (serialmon 255): Begin, version=1.52, high-res time 16:09:58.822 (serialmon 255): listening for location: usb:0/140000/0/5/2 16:09:58.822 (serialmon 255): LoadLibrary cfgmgr32 ok 16:09:58.822 (serialmon 255): LoadLibrary ntdll ok 16:09:58.828 (serialmon 255): callback 0024 16:09:58.829 (serialmon 255): callback 0081 16:09:58.833 (serialmon 255): callback 0083 16:09:58.833 (serialmon 255): hWnd = 9769962 16:09:58.834 (serialmon 255): loop stdin, ready=262143 16:09:58.837 (serialmon 255): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:09:58.837 (serialmon 255): found_usb_device, loc=usb:0/140000/0/5/2 Port_#0002.Hub_#0006 16:09:58.837 (serialmon 255): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0280 16:09:58.837 (serialmon 255): found_usb_device, devinst=00000003 16:09:58.837 (serialmon 255): add: loc=usb:0/140000/0/5/2, class=Ports, vid=16C0, pid=0483, ver=0280, serial=1000380, dev=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:09:58.837 (serialmon 255): comport_from_devinst_list attempt 16:09:58.837 (serialmon 255): found Ports in classguid_list at index=0 16:09:58.837 (serialmon 255): port COM17 found from devnode 16:09:58.837 (serialmon 255): found_usb_device complete 16:09:58.840 (serialmon 255): usb_add: usb:0/140000/0/5/2 16:09:58.840 (serialmon 255): translate "COM17" -> "\\.\COM17" 16:09:59.008 (serialmon 255): GetDefaultCommConfig success 16:09:59.165 (serialmon 255): SetDefaultCommConfig success 16:09:59.165 (serialmon 255): Unable to open COM17 16:09:59.167 (ports 197): callback 001A 16:09:59.167 (ports 2): callback 001A 16:09:59.203 (loader): remote connection 3628 opened 16:09:59.658 (ports 197): callback C159 16:09:59.695 (ports 2): callback C159 16:10:01.710 (ports 197): callback C159 16:10:02.048 (ports 2): callback C159 16:10:02.457 (loader): remote connection 3628 closed 16:10:04.064 (ports 197): callback C159 16:10:04.072 (ports 2): callback C159 16:10:04.698 (loader): file changed 16:10:04.712 (loader): File "SerialEventsTest.ino.hex". 37740 bytes, 0% used 16:10:04.785 (post_compile 256): Begin, version=1.52, high-res time 16:10:04.789 (loader): remote connection 3396 opened 16:10:04.789 (loader): remote cmd from 3396: "comment: Teensyduino 1.52 - WINDOWS (teensy_post_compile)" 16:10:04.789 (loader): remote cmd from 3396: "status" 16:10:04.790 (post_compile 256): Sending command: comment: Teensyduino 1.52 - WINDOWS (teensy_post_compile) 16:10:04.792 (post_compile 256): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:04.792 (post_compile 256): Sending command: dir:T:\TEMP\arduino_build_986240\ 16:10:04.792 (loader): remote cmd from 3396: "dir:T:\TEMP\arduino_build_986240\" 16:10:04.792 (loader): remote cmd from 3396: "file:SerialEventsTest.ino.hex" 16:10:04.792 (post_compile 256): Sending command: file:SerialEventsTest.ino.hex 16:10:04.805 (loader): File "SerialEventsTest.ino.hex". 37740 bytes, 0% used 16:10:04.809 (loader): remote cmd from 3396: "status" 16:10:04.812 (post_compile 256): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:04.812 (post_compile 256): Disconnect 16:10:04.823 (loader): remote connection 3396 closed 16:10:05.039 (post_compile 257): Begin, version=1.52, high-res time 16:10:05.042 (loader): remote connection 3628 opened 16:10:05.043 (post_compile 257): Sending command: comment: Teensyduino 1.52 - WINDOWS (teensy_post_compile) 16:10:05.043 (loader): remote cmd from 3628: "comment: Teensyduino 1.52 - WINDOWS (teensy_post_compile)" 16:10:05.043 (loader): remote cmd from 3628: "status" 16:10:05.044 (loader): remote cmd from 3628: "dir:T:\TEMP\arduino_build_986240\" 16:10:05.045 (post_compile 257): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:05.045 (post_compile 257): Sending command: dir:T:\TEMP\arduino_build_986240\ 16:10:05.045 (loader): remote cmd from 3628: "file:SerialEventsTest.ino.hex" 16:10:05.045 (post_compile 257): Sending command: file:SerialEventsTest.ino.hex 16:10:05.057 (loader): File "SerialEventsTest.ino.hex". 37740 bytes, 0% used 16:10:05.061 (loader): remote cmd from 3628: "status" 16:10:05.063 (post_compile 257): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:05.063 (post_compile 257): Disconnect 16:10:05.073 (loader): remote connection 3628 closed 16:10:05.073 (loader): remote connection 3628 opened 16:10:05.074 (post_compile 258): Running teensy_reboot: "T:\arduino-1.8.12H\hardware\teensy\..\tools\teensy_reboot.exe" teensy_reboot.exe "-board=TEENSY41" "-port=usb:0/140000/0/5/2" "-portlabel=COM17 Serial" "-portprotocol=Teensy" 16:10:05.094 (reboot 259): Begin, version=1.52, high-res time 16:10:05.094 (reboot 259): location = usb:0/140000/0/5/2 16:10:05.094 (reboot 259): portlabel = COM17 Serial 16:10:05.094 (reboot 259): Only location usb:0/140000/0/5/2 will be tried 16:10:05.094 (reboot 259): portprotocol = Teensy 16:10:05.094 (reboot 259): LoadLibrary cfgmgr32 ok 16:10:05.094 (reboot 259): LoadLibrary ntdll ok 16:10:05.096 (reboot 259): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:10:05.096 (reboot 259): found_usb_device, loc=usb:0/140000/0/5/2 Port_#0002.Hub_#0006 16:10:05.096 (reboot 259): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0280 16:10:05.096 (reboot 259): found_usb_device, devinst=00000003 16:10:05.096 (reboot 259): add: loc=usb:0/140000/0/5/2, class=Ports, vid=16C0, pid=0483, ver=0280, serial=1000380, dev=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:10:05.096 (reboot 259): comport_from_devinst_list attempt 16:10:05.096 (reboot 259): found Ports in classguid_list at index=0 16:10:05.096 (reboot 259): port COM17 found from devnode 16:10:05.096 (reboot 259): found_usb_device complete 16:10:05.102 (loader): remote connection 3524 opened 16:10:05.102 (loader): remote cmd from 3524: "show:arduino_attempt_reboot" 16:10:05.102 (loader): got request to show arduino rebooting message 16:10:05.103 (reboot 259): found Teensy Loader, version 1.52 16:10:05.103 (reboot 259): Sending command: show:arduino_attempt_reboot 16:10:05.104 (loader): remote cmd from 3524: "comment: Teensyduino 1.52 - WINDOWS (teensy_reboot)" 16:10:05.105 (reboot 259): Sending command: comment: Teensyduino 1.52 - WINDOWS (teensy_reboot) 16:10:05.105 (loader): remote cmd from 3524: "status" 16:10:05.107 (loader): remote cmd from 3524: "status" 16:10:05.108 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:05.108 (reboot 259): do_reset (serial) COM17 16:10:05.110 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:05.110 (reboot 259): status read, retry 0 16:10:05.211 (loader): remote cmd from 3524: "status" 16:10:05.213 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:05.213 (reboot 259): status read, retry 1 16:10:05.323 (loader): remote cmd from 3524: "status" 16:10:05.326 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:05.326 (reboot 259): status read, retry 2 16:10:05.432 (loader): remote cmd from 3524: "status" 16:10:05.435 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:05.435 (reboot 259): status read, retry 3 16:10:05.537 (loader): remote cmd from 3524: "status" 16:10:05.539 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:05.539 (reboot 259): status read, retry 4 16:10:05.641 (loader): remote cmd from 3524: "status" 16:10:05.643 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:05.643 (reboot 259): status read, retry 5 16:10:05.745 (loader): remote cmd from 3524: "status" 16:10:05.747 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:05.747 (reboot 259): status read, retry 6 16:10:05.847 (loader): remote cmd from 3524: "status" 16:10:05.849 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:05.849 (reboot 259): status read, retry 7 16:10:05.953 (loader): remote cmd from 3524: "status" 16:10:05.956 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:05.956 (reboot 259): status read, retry 8 16:10:06.056 (loader): remote cmd from 3524: "status" 16:10:06.059 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:06.059 (reboot 259): status read, retry 9 16:10:06.086 (ports 197): callback C159 16:10:06.159 (loader): remote cmd from 3524: "status" 16:10:06.161 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:06.161 (reboot 259): status read, retry 10 16:10:06.262 (loader): remote cmd from 3524: "status" 16:10:06.264 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:06.264 (reboot 259): status read, retry 11 16:10:06.288 (ports 2): callback C159 16:10:06.371 (loader): remote cmd from 3524: "status" 16:10:06.374 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:06.374 (reboot 259): status read, retry 12 16:10:06.481 (loader): remote cmd from 3524: "status" 16:10:06.483 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:06.483 (reboot 259): status read, retry 13 16:10:06.584 (loader): remote cmd from 3524: "status" 16:10:06.586 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:06.586 (reboot 259): status read, retry 14 16:10:06.686 (loader): remote cmd from 3524: "status" 16:10:06.688 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:06.688 (reboot 259): status read, retry 15 16:10:06.789 (loader): remote cmd from 3524: "status" 16:10:06.791 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:06.791 (reboot 259): status read, retry 16 16:10:06.892 (loader): remote cmd from 3524: "status" 16:10:06.893 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:06.893 (reboot 259): status read, retry 17 16:10:06.994 (loader): remote cmd from 3524: "status" 16:10:06.996 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:06.996 (reboot 259): status read, retry 18 16:10:07.096 (loader): remote cmd from 3524: "status" 16:10:07.099 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:07.099 (reboot 259): status read, retry 19 16:10:07.199 (loader): remote cmd from 3524: "status" 16:10:07.202 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:07.202 (reboot 259): status read, retry 20 16:10:07.310 (loader): remote cmd from 3524: "status" 16:10:07.311 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:07.311 (reboot 259): status read, retry 21 16:10:07.419 (loader): remote cmd from 3524: "status" 16:10:07.421 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:07.421 (reboot 259): status read, retry 22 16:10:07.522 (loader): remote cmd from 3524: "status" 16:10:07.524 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:07.524 (reboot 259): status read, retry 23 16:10:07.624 (loader): remote cmd from 3524: "status" 16:10:07.625 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:07.625 (reboot 259): status read, retry 24 16:10:07.726 (loader): remote cmd from 3524: "status" 16:10:07.727 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:07.727 (reboot 259): status read, retry 25 16:10:07.828 (loader): remote cmd from 3524: "status" 16:10:07.830 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:07.830 (reboot 259): status read, retry 26 16:10:07.931 (loader): remote cmd from 3524: "status" 16:10:07.933 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:07.933 (reboot 259): status read, retry 27 16:10:08.033 (loader): remote cmd from 3524: "status" 16:10:08.035 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:08.035 (reboot 259): status read, retry 28 16:10:08.136 (loader): remote cmd from 3524: "status" 16:10:08.138 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:08.138 (reboot 259): status read, retry 29 16:10:08.238 (loader): remote cmd from 3524: "status" 16:10:08.240 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:08.240 (reboot 259): status read, retry 30 16:10:08.310 (ports 197): callback C159 16:10:08.316 (ports 2): callback C159 16:10:08.342 (loader): remote cmd from 3524: "status" 16:10:08.344 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:08.344 (reboot 259): status read, retry 31 16:10:08.451 (loader): remote cmd from 3524: "status" 16:10:08.454 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:08.454 (reboot 259): status read, retry 32 16:10:08.554 (loader): remote cmd from 3524: "status" 16:10:08.556 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:08.556 (reboot 259): status read, retry 33 16:10:08.656 (loader): remote cmd from 3524: "status" 16:10:08.658 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:08.658 (reboot 259): status read, retry 34 16:10:08.759 (loader): remote cmd from 3524: "status" 16:10:08.761 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:08.761 (reboot 259): status read, retry 35 16:10:08.862 (loader): remote cmd from 3524: "status" 16:10:08.863 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:08.863 (reboot 259): status read, retry 36 16:10:08.964 (loader): remote cmd from 3524: "status" 16:10:08.966 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:08.966 (reboot 259): status read, retry 37 16:10:09.067 (loader): remote cmd from 3524: "status" 16:10:09.069 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:09.069 (reboot 259): status read, retry 38 16:10:09.170 (loader): remote cmd from 3524: "status" 16:10:09.173 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:09.173 (reboot 259): status read, retry 39 16:10:09.280 (loader): remote cmd from 3524: "status" 16:10:09.283 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:09.283 (reboot 259): status read, retry 40 16:10:09.390 (loader): remote cmd from 3524: "status" 16:10:09.392 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:09.392 (reboot 259): status read, retry 41 16:10:09.499 (loader): remote cmd from 3524: "status" 16:10:09.502 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:09.502 (reboot 259): status read, retry 42 16:10:09.603 (loader): remote cmd from 3524: "status" 16:10:09.605 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:09.605 (reboot 259): status read, retry 43 16:10:09.705 (loader): remote cmd from 3524: "status" 16:10:09.708 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:09.708 (reboot 259): status read, retry 44 16:10:09.808 (loader): remote cmd from 3524: "status" 16:10:09.810 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:09.810 (reboot 259): status read, retry 45 16:10:09.910 (loader): remote cmd from 3524: "status" 16:10:09.912 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:09.912 (reboot 259): status read, retry 46 16:10:10.013 (loader): remote cmd from 3524: "status" 16:10:10.014 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:10.014 (reboot 259): status read, retry 47 16:10:10.115 (loader): remote cmd from 3524: "status" 16:10:10.117 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:10.117 (reboot 259): status read, retry 48 16:10:10.217 (loader): remote cmd from 3524: "status" 16:10:10.219 (reboot 259): Status: 1, 1, 0, 106, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:10.219 (reboot 259): status read, retry 49 16:10:10.322 (ports 197): callback C159 16:10:10.328 (loader): remote connection 3524 closed 16:10:10.328 (loader): remote connection 3628 closed 16:10:10.328 (reboot 259): Teensy did not respond to a USB-based request to automatically reboot. 16:10:10.420 (serialmon 260): Begin, version=1.52, high-res time 16:10:10.420 (serialmon 260): listening for location: usb:0/140000/0/5/2 16:10:10.420 (serialmon 260): LoadLibrary cfgmgr32 ok 16:10:10.420 (serialmon 260): LoadLibrary ntdll ok 16:10:10.426 (serialmon 260): callback 0024 16:10:10.426 (serialmon 260): callback 0081 16:10:10.430 (serialmon 260): callback 0083 16:10:10.430 (serialmon 260): hWnd = 6359952 16:10:10.431 (serialmon 260): loop stdin, ready=262143 16:10:10.433 (serialmon 260): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:10:10.433 (serialmon 260): found_usb_device, loc=usb:0/140000/0/5/2 Port_#0002.Hub_#0006 16:10:10.433 (serialmon 260): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0280 16:10:10.433 (serialmon 260): found_usb_device, devinst=00000003 16:10:10.433 (serialmon 260): add: loc=usb:0/140000/0/5/2, class=Ports, vid=16C0, pid=0483, ver=0280, serial=1000380, dev=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:10:10.433 (serialmon 260): comport_from_devinst_list attempt 16:10:10.433 (serialmon 260): found Ports in classguid_list at index=0 16:10:10.433 (serialmon 260): port COM17 found from devnode 16:10:10.433 (serialmon 260): found_usb_device complete 16:10:10.435 (serialmon 260): usb_add: usb:0/140000/0/5/2 16:10:10.435 (serialmon 260): translate "COM17" -> "\\.\COM17" 16:10:10.488 (ports 2): callback C159 16:10:10.607 (serialmon 260): GetDefaultCommConfig success 16:10:10.773 (serialmon 260): SetDefaultCommConfig success 16:10:10.773 (serialmon 260): Unable to open COM17 16:10:10.777 (ports 197): callback 001A 16:10:10.778 (ports 2): callback 001A 16:10:10.806 (loader): remote connection 3528 opened 16:10:10.808 (serialmon 260): callback 001A 16:10:12.499 (serialmon 260): callback C159 16:10:12.503 (ports 197): callback C159 16:10:12.507 (ports 2): callback C159 16:10:14.517 (serialmon 260): callback C159 16:10:14.521 (ports 197): callback C159 16:10:14.811 (ports 2): callback C159 16:10:16.824 (serialmon 260): callback C159 16:10:16.828 (ports 197): callback C159 16:10:16.833 (ports 2): callback C159 16:10:17.482 (ports 197): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 16:10:17.482 (ports 2): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 16:10:17.483 (ports 197): remove: loc=usb:0/140000/0/5/2 16:10:17.483 (ports 197): usb_remove: usb:0/140000/0/5/2 16:10:17.483 (ports 197): nothing new, skipping HID & Ports enum 16:10:17.483 (ports 2): remove: loc=usb:0/140000/0/5/2 16:10:17.483 (ports 2): usb_remove: usb:0/140000/0/5/2 16:10:17.483 (ports 2): nothing new, skipping HID & Ports enum 16:10:17.484 (serialmon 260): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 16:10:17.484 (serialmon 260): remove: loc=usb:0/140000/0/5/2 16:10:17.484 (serialmon 260): usb_remove: usb:0/140000/0/5/2 16:10:17.485 (serialmon 260): nothing new, skipping HID & Ports enum 16:10:17.498 (serialmon 260): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 16:10:17.498 (serialmon 260): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 16:10:17.499 (serialmon 260): nothing new, skipping HID & Ports enum 16:10:17.514 (ports 197): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 16:10:17.515 (ports 197): nothing new, skipping HID & Ports enum 16:10:17.517 (ports 197): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 16:10:17.518 (ports 197): nothing new, skipping HID & Ports enum 16:10:17.534 (ports 2): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 16:10:17.535 (ports 2): nothing new, skipping HID & Ports enum 16:10:17.968 (serialmon 260): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 16:10:17.969 (ports 197): WM_DEVICECHANGE DBT_DEVICEARRIVAL 16:10:17.969 (ports 2): WM_DEVICECHANGE DBT_DEVICEARRIVAL 16:10:17.969 (serialmon 260): nothing new, skipping HID & Ports enum 16:10:17.969 (serialmon 260): WM_DEVICECHANGE DBT_DEVICEARRIVAL 16:10:17.970 (ports 197): found_usb_device, id=\\?\usb#vid_16c0&pid_0478#000186c6#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:10:17.970 (ports 197): found_usb_device, loc=usb:0/140000/0/5/2 Port_#0002.Hub_#0006 16:10:17.970 (ports 197): found_usb_device, hwid=USB\VID_16C0&PID_0478&REV_0105 16:10:17.970 (ports 197): found_usb_device, devinst=00000027 16:10:17.970 (ports 197): add: loc=usb:0/140000/0/5/2, class=HID, vid=16C0, pid=0478, ver=0105, serial=000186c6, dev=\\?\usb#vid_16c0&pid_0478#000186c6#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:10:17.970 (ports 197): hiddev_from_devinst_list: iface=0 16:10:17.970 (ports 2): found_usb_device, id=\\?\usb#vid_16c0&pid_0478#000186c6#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:10:17.970 (ports 2): found_usb_device, loc=usb:0/140000/0/5/2 Port_#0002.Hub_#0006 16:10:17.970 (ports 2): found_usb_device, hwid=USB\VID_16C0&PID_0478&REV_0105 16:10:17.970 (ports 2): found_usb_device, devinst=0000001f 16:10:17.970 (ports 2): add: loc=usb:0/140000/0/5/2, class=HID, vid=16C0, pid=0478, ver=0105, serial=000186c6, dev=\\?\usb#vid_16c0&pid_0478#000186c6#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:10:17.970 (ports 2): hiddev_from_devinst_list: iface=0 16:10:17.970 (serialmon 260): found_usb_device, id=\\?\usb#vid_16c0&pid_0478#000186c6#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:10:17.970 (serialmon 260): found_usb_device, loc=usb:0/140000/0/5/2 Port_#0002.Hub_#0006 16:10:17.970 (serialmon 260): found_usb_device, hwid=USB\VID_16C0&PID_0478&REV_0105 16:10:17.970 (serialmon 260): found_usb_device, devinst=0000001d 16:10:17.970 (serialmon 260): add: loc=usb:0/140000/0/5/2, class=HID, vid=16C0, pid=0478, ver=0105, serial=000186c6, dev=\\?\usb#vid_16c0&pid_0478#000186c6#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:10:17.971 (serialmon 260): hiddev_from_devinst_list: iface=0 16:10:17.971 (ports 197): found_usb_device complete 16:10:17.971 (ports 2): found_usb_device complete 16:10:17.972 (serialmon 260): found_usb_device complete 16:10:17.973 (ports 197): usb_add: usb:0/140000/0/5/2 [no_device] (Teensy 4.1) Bootloader 16:10:17.973 (ports 2): usb_add: usb:0/140000/0/5/2 [no_device] (Teensy 4.1) Bootloader 16:10:17.973 (serialmon 260): usb_add: usb:0/140000/0/5/2 16:10:17.973 (serialmon 260): ignoring partial USB device discovery (Windows XP issue?) 16:10:17.977 (ports 197): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 16:10:17.979 (ports 197): hid, found devinst=00000028 16:10:17.979 (ports 197): hid, path=\\?\hid#vid_16c0&pid_0478#7&11cdee8&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 16:10:17.979 (ports 197): hid, opened handle 16:10:17.979 (ports 197): devinst=00000028, location=usb:0/140000/0/5/2 16:10:17.979 (ports 197): vid=16C0, pid=0478, ver=0105, usepage=FF9C, use=0025 16:10:17.979 (ports 197): devpath=\\?\hid#vid_16c0&pid_0478#7&11cdee8&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 16:10:17.979 (ports 197): usb_add: usb:0/140000/0/5/2 hid#vid_16c0&pid_0478 (Teensy 4.1) Bootloader 16:10:18.200 (loader): Device came online, code_size = 8126464 16:10:18.200 (loader): Board is: Teensy 4.1 (IMXRT1062), version 1.05 16:10:18.215 (loader): File "SerialEventsTest.ino.hex". 37740 bytes, 0% used 16:10:18.216 (loader): set background IMG_ONLINE 16:10:18.224 (serialmon 260): retry device discovery (Windows XP workaround) 16:10:18.225 (serialmon 260): hid, found devinst=0000001E 16:10:18.230 (loader): File "SerialEventsTest.ino.hex". 37740 bytes, 0% used 16:10:18.231 (loader): elf appears to be for Teensy 4.1 (IMXRT1062) (8126464 bytes) 16:10:18.231 (loader): elf binary data matches hex file 16:10:18.231 (loader): elf file is for Teensy 4.1 (IMXRT1062) 16:10:18.231 (loader): begin operation 16:10:18.254 (ports 2): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 16:10:18.254 (ports 2): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 16:10:18.255 (ports 2): hid, found devinst=00000020 16:10:18.255 (ports 2): hid, path=\\?\hid#vid_16c0&pid_0478#7&11cdee8&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 16:10:18.256 (ports 2): hid, opened handle 16:10:18.256 (ports 2): devinst=00000020, location=usb:0/140000/0/5/2 16:10:18.256 (ports 2): vid=16C0, pid=0478, ver=0105, usepage=FF9C, use=0025 16:10:18.256 (ports 2): devpath=\\?\hid#vid_16c0&pid_0478#7&11cdee8&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 16:10:18.256 (ports 2): usb_add: usb:0/140000/0/5/2 hid#vid_16c0&pid_0478 (Teensy 4.1) Bootloader 16:10:18.258 (loader): flash, block=0, bs=1024, auto=1 16:10:18.259 (loader): gauge old value = 0 16:10:18.259 (loader): flash, block=1, bs=1024, auto=1 16:10:18.292 (serialmon 260): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 16:10:18.293 (serialmon 260): hid, found devinst=0000001E 16:10:18.295 (serialmon 260): hid, found devinst=0000001E 16:10:18.306 (ports 197): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 16:10:18.307 (ports 197): nothing new, skipping HID & Ports enum 16:10:18.454 (loader): gauge old value = 1 16:10:18.455 (loader): flash, block=2, bs=1024, auto=1 16:10:18.546 (serialmon 260): retry device discovery (Windows XP workaround) 16:10:18.548 (serialmon 260): hid, found devinst=0000001E 16:10:18.622 (loader): gauge old value = 2 16:10:18.622 (loader): flash, block=3, bs=1024, auto=1 16:10:18.622 (loader): gauge old value = 3 16:10:18.622 (loader): flash, block=4, bs=1024, auto=1 16:10:18.623 (loader): gauge old value = 4 16:10:18.626 (loader): flash, block=5, bs=1024, auto=1 16:10:18.626 (loader): gauge old value = 5 16:10:18.629 (loader): flash, block=6, bs=1024, auto=1 16:10:18.629 (loader): gauge old value = 6 16:10:18.631 (loader): flash, block=7, bs=1024, auto=1 16:10:18.631 (loader): gauge old value = 7 16:10:18.634 (loader): flash, block=8, bs=1024, auto=1 16:10:18.634 (ports 2): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 16:10:18.635 (loader): gauge old value = 8 16:10:18.636 (ports 2): nothing new, skipping HID & Ports enum 16:10:18.637 (loader): flash, block=9, bs=1024, auto=1 16:10:18.637 (loader): gauge old value = 9 16:10:18.641 (loader): flash, block=10, bs=1024, auto=1 16:10:18.641 (loader): gauge old value = 10 16:10:18.644 (loader): flash, block=11, bs=1024, auto=1 16:10:18.644 (loader): gauge old value = 11 16:10:18.646 (loader): flash, block=12, bs=1024, auto=1 16:10:18.646 (loader): gauge old value = 12 16:10:18.647 (loader): flash, block=13, bs=1024, auto=1 16:10:18.648 (loader): gauge old value = 13 16:10:18.649 (loader): flash, block=14, bs=1024, auto=1 16:10:18.649 (loader): gauge old value = 14 16:10:18.651 (loader): flash, block=15, bs=1024, auto=1 16:10:18.651 (loader): gauge old value = 15 16:10:18.652 (loader): flash, block=16, bs=1024, auto=1 16:10:18.653 (loader): gauge old value = 16 16:10:18.654 (loader): flash, block=17, bs=1024, auto=1 16:10:18.654 (loader): gauge old value = 17 16:10:18.656 (loader): flash, block=18, bs=1024, auto=1 16:10:18.656 (loader): gauge old value = 18 16:10:18.658 (loader): flash, block=19, bs=1024, auto=1 16:10:18.658 (loader): gauge old value = 19 16:10:18.659 (loader): flash, block=20, bs=1024, auto=1 16:10:18.659 (loader): gauge old value = 20 16:10:18.662 (loader): flash, block=21, bs=1024, auto=1 16:10:18.662 (loader): gauge old value = 21 16:10:18.663 (loader): flash, block=22, bs=1024, auto=1 16:10:18.663 (loader): gauge old value = 22 16:10:18.665 (loader): flash, block=23, bs=1024, auto=1 16:10:18.665 (loader): gauge old value = 23 16:10:18.666 (loader): flash, block=24, bs=1024, auto=1 16:10:18.667 (loader): gauge old value = 24 16:10:18.668 (loader): flash, block=25, bs=1024, auto=1 16:10:18.668 (loader): gauge old value = 25 16:10:18.670 (loader): flash, block=26, bs=1024, auto=1 16:10:18.670 (loader): gauge old value = 26 16:10:18.671 (loader): flash, block=27, bs=1024, auto=1 16:10:18.672 (loader): gauge old value = 27 16:10:18.673 (loader): flash, block=28, bs=1024, auto=1 16:10:18.673 (loader): gauge old value = 28 16:10:18.675 (loader): flash, block=29, bs=1024, auto=1 16:10:18.675 (loader): gauge old value = 29 16:10:18.676 (loader): flash, block=30, bs=1024, auto=1 16:10:18.676 (loader): gauge old value = 30 16:10:18.678 (loader): flash, block=31, bs=1024, auto=1 16:10:18.678 (loader): gauge old value = 31 16:10:18.679 (loader): flash, block=32, bs=1024, auto=1 16:10:18.679 (loader): gauge old value = 32 16:10:18.681 (loader): flash, block=33, bs=1024, auto=1 16:10:18.681 (loader): gauge old value = 33 16:10:18.683 (loader): flash, block=34, bs=1024, auto=1 16:10:18.683 (loader): gauge old value = 34 16:10:18.684 (loader): flash, block=35, bs=1024, auto=1 16:10:18.685 (loader): gauge old value = 35 16:10:18.686 (loader): flash, block=36, bs=1024, auto=1 16:10:18.686 (loader): gauge old value = 36 16:10:18.694 (loader): sending reboot 16:10:18.695 (loader): begin wait_until_offline 16:10:18.708 (serialmon 260): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 16:10:18.708 (serialmon 260): remove: loc=usb:0/140000/0/5/2 16:10:18.708 (serialmon 260): usb_remove: usb:0/140000/0/5/2 16:10:18.709 (serialmon 260): nothing new, skipping HID & Ports enum 16:10:18.709 (serialmon 260): nothing new, skipping HID & Ports enum 16:10:18.713 (ports 197): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 16:10:18.716 (ports 197): remove: loc=usb:0/140000/0/5/2 16:10:18.716 (ports 197): usb_remove: usb:0/140000/0/5/2 16:10:18.716 (ports 197): nothing new, skipping HID & Ports enum 16:10:18.718 (ports 197): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 16:10:18.718 (ports 2): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 16:10:18.719 (ports 197): nothing new, skipping HID & Ports enum 16:10:18.719 (serialmon 260): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 16:10:18.719 (ports 2): remove: loc=usb:0/140000/0/5/2 16:10:18.719 (ports 2): usb_remove: usb:0/140000/0/5/2 16:10:18.719 (ports 2): nothing new, skipping HID & Ports enum 16:10:18.720 (serialmon 260): nothing new, skipping HID & Ports enum 16:10:18.746 (loader): offline, waited 1 16:10:18.746 (loader): end operation, total time = 0.514 seconds 16:10:18.747 (loader): set background IMG_REBOOT_OK 16:10:18.751 (loader): redraw timer set, image 14 to show for 1200 ms 16:10:18.762 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 16:10:18.762 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 16:10:18.762 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 16:10:18.762 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 16:10:18.762 (loader): HID/win32: vid:046D pid:C534 ver:2901 16:10:18.762 (loader): HID/win32: vid:046D pid:C534 ver:2901 16:10:18.762 (loader): HID/win32: vid:046D pid:C534 ver:2901 16:10:18.763 (loader): HID/win32: vid:046D pid:C534 ver:2901 16:10:18.763 (loader): HID/win32: vid:0764 pid:0501 ver:0001 16:10:18.768 (ports 2): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 16:10:18.771 (ports 2): nothing new, skipping HID & Ports enum 16:10:18.843 (serialmon 260): callback C159 16:10:18.844 (serialmon 260): nothing new, skipping HID & Ports enum 16:10:18.980 (ports 197): callback C159 16:10:19.043 (ports 2): callback C159 16:10:19.105 (serialmon 260): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 16:10:19.105 (serialmon 260): nothing new, skipping HID & Ports enum 16:10:19.110 (ports 197): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 16:10:19.111 (ports 197): nothing new, skipping HID & Ports enum 16:10:19.117 (ports 2): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 16:10:19.118 (ports 2): nothing new, skipping HID & Ports enum 16:10:19.130 (ports 197): WM_DEVICECHANGE DBT_DEVICEARRIVAL 16:10:19.130 (ports 2): WM_DEVICECHANGE DBT_DEVICEARRIVAL 16:10:19.130 (serialmon 260): WM_DEVICECHANGE DBT_DEVICEARRIVAL 16:10:19.131 (ports 2): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:10:19.131 (ports 2): found_usb_device, loc=usb:0/140000/0/5/2 Port_#0002.Hub_#0006 16:10:19.131 (ports 2): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0280 16:10:19.131 (ports 2): found_usb_device, devinst=00000021 16:10:19.131 (ports 2): add: loc=usb:0/140000/0/5/2, class=Ports, vid=16C0, pid=0483, ver=0280, serial=1000380, dev=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:10:19.131 (ports 2): comport_from_devinst_list attempt 16:10:19.131 (ports 2): found Ports in classguid_list at index=0 16:10:19.131 (ports 2): port COM17 found from devnode 16:10:19.131 (ports 2): found_usb_device complete 16:10:19.131 (ports 197): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:10:19.131 (ports 197): found_usb_device, loc=usb:0/140000/0/5/2 Port_#0002.Hub_#0006 16:10:19.131 (ports 197): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0280 16:10:19.131 (ports 197): found_usb_device, devinst=00000004 16:10:19.131 (ports 197): add: loc=usb:0/140000/0/5/2, class=Ports, vid=16C0, pid=0483, ver=0280, serial=1000380, dev=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:10:19.131 (ports 197): comport_from_devinst_list attempt 16:10:19.131 (ports 197): found Ports in classguid_list at index=0 16:10:19.132 (ports 197): port COM17 found from devnode 16:10:19.132 (ports 197): found_usb_device complete 16:10:19.132 (serialmon 260): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:10:19.132 (serialmon 260): found_usb_device, loc=usb:0/140000/0/5/2 Port_#0002.Hub_#0006 16:10:19.132 (serialmon 260): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0280 16:10:19.132 (serialmon 260): found_usb_device, devinst=00000003 16:10:19.132 (serialmon 260): add: loc=usb:0/140000/0/5/2, class=Ports, vid=16C0, pid=0483, ver=0280, serial=1000380, dev=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:10:19.132 (serialmon 260): comport_from_devinst_list attempt 16:10:19.132 (serialmon 260): found Ports in classguid_list at index=0 16:10:19.132 (serialmon 260): port COM17 found from devnode 16:10:19.132 (serialmon 260): found_usb_device complete 16:10:19.133 (ports 2): usb_add: usb:0/140000/0/5/2 COM17 (Teensy 4.1) Serial 16:10:19.133 (ports 197): usb_add: usb:0/140000/0/5/2 COM17 (Teensy 4.1) Serial 16:10:19.133 (serialmon 260): usb_add: usb:0/140000/0/5/2 16:10:19.133 (serialmon 260): translate "COM17" -> "\\.\COM17" 16:10:19.446 (serialmon 260): GetDefaultCommConfig success 16:10:19.952 (loader): redraw, image 9 16:10:19.957 (serialmon 260): SetDefaultCommConfig success 16:10:19.958 (serialmon 260): Unable to open COM17 16:10:19.959 (ports 197): callback 001A 16:10:19.959 (ports 2): callback 001A 16:10:19.961 (serialmon 260): WM_DEVICECHANGE DBT_DEVICEARRIVAL 16:10:19.962 (serialmon 260): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 16:10:19.966 (serialmon 260): callback 001A 16:10:19.973 (serialmon 260): nothing new, skipping HID & Ports enum 16:10:20.876 (ports 197): WM_DEVICECHANGE DBT_DEVICEARRIVAL 16:10:20.876 (ports 197): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 16:10:20.877 (ports 197): nothing new, skipping HID & Ports enum 16:10:22.802 (ports 197): callback C159 16:10:22.817 (ports 2): WM_DEVICECHANGE DBT_DEVICEARRIVAL 16:10:22.817 (ports 2): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 16:10:22.818 (ports 2): nothing new, skipping HID & Ports enum 16:10:25.170 (ports 2): callback C159 16:10:28.916 (ports 197): callback C159 16:10:29.758 (loader): remote connection 3528 closed 16:10:32.607 (post_compile 261): Begin, version=1.52, high-res time 16:10:32.611 (loader): remote connection 3084 opened 16:10:32.611 (loader): remote cmd from 3084: "comment: Teensyduino 1.52 - WINDOWS (teensy_post_compile)" 16:10:32.611 (loader): remote cmd from 3084: "status" 16:10:32.611 (loader): file changed 16:10:32.611 (post_compile 261): Sending command: comment: Teensyduino 1.52 - WINDOWS (teensy_post_compile) 16:10:32.624 (loader): File "SerialEventsTest.ino.hex". 37740 bytes, 0% used 16:10:32.628 (post_compile 261): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:32.628 (post_compile 261): Sending command: dir:T:\TEMP\arduino_build_986240\ 16:10:32.631 (loader): remote cmd from 3084: "dir:T:\TEMP\arduino_build_986240\" 16:10:32.631 (post_compile 261): Sending command: file:SerialEventsTest.ino.hex 16:10:32.632 (loader): remote cmd from 3084: "file:SerialEventsTest.ino.hex" 16:10:32.646 (loader): File "SerialEventsTest.ino.hex". 37740 bytes, 0% used 16:10:32.651 (loader): remote cmd from 3084: "status" 16:10:32.653 (post_compile 261): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:32.653 (post_compile 261): Disconnect 16:10:32.664 (loader): remote connection 3084 closed 16:10:32.892 (post_compile 262): Begin, version=1.52, high-res time 16:10:32.897 (loader): remote connection 3676 opened 16:10:32.898 (post_compile 262): Sending command: comment: Teensyduino 1.52 - WINDOWS (teensy_post_compile) 16:10:32.898 (loader): remote cmd from 3676: "comment: Teensyduino 1.52 - WINDOWS (teensy_post_compile)" 16:10:32.898 (loader): remote cmd from 3676: "status" 16:10:32.900 (loader): remote cmd from 3676: "dir:T:\TEMP\arduino_build_986240\" 16:10:32.900 (loader): remote cmd from 3676: "file:SerialEventsTest.ino.hex" 16:10:32.900 (post_compile 262): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:32.900 (post_compile 262): Sending command: dir:T:\TEMP\arduino_build_986240\ 16:10:32.900 (post_compile 262): Sending command: file:SerialEventsTest.ino.hex 16:10:32.915 (loader): File "SerialEventsTest.ino.hex". 37740 bytes, 0% used 16:10:32.921 (loader): remote cmd from 3676: "status" 16:10:32.923 (post_compile 262): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:32.923 (post_compile 262): Disconnect 16:10:32.934 (loader): remote connection 3676 closed 16:10:32.934 (loader): remote connection 3676 opened 16:10:32.934 (post_compile 263): Running teensy_reboot: "T:\arduino-1.8.12H\hardware\teensy\..\tools\teensy_reboot.exe" teensy_reboot.exe "-board=TEENSY41" "-port=usb:0/140000/0/5/2" "-portlabel=COM17 Serial" "-portprotocol=Teensy" 16:10:32.956 (reboot 264): Begin, version=1.52, high-res time 16:10:32.956 (reboot 264): location = usb:0/140000/0/5/2 16:10:32.956 (reboot 264): portlabel = COM17 Serial 16:10:32.956 (reboot 264): Only location usb:0/140000/0/5/2 will be tried 16:10:32.956 (reboot 264): portprotocol = Teensy 16:10:32.956 (reboot 264): LoadLibrary cfgmgr32 ok 16:10:32.956 (reboot 264): LoadLibrary ntdll ok 16:10:32.959 (reboot 264): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:10:32.959 (reboot 264): found_usb_device, loc=usb:0/140000/0/5/2 Port_#0002.Hub_#0006 16:10:32.959 (reboot 264): found_usb_device, devinst=00000003 16:10:32.959 (reboot 264): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0280 16:10:32.959 (reboot 264): add: loc=usb:0/140000/0/5/2, class=Ports, vid=16C0, pid=0483, ver=0280, serial=1000380, dev=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:10:32.959 (reboot 264): comport_from_devinst_list attempt 16:10:32.959 (reboot 264): found Ports in classguid_list at index=0 16:10:32.959 (reboot 264): port COM17 found from devnode 16:10:32.959 (reboot 264): found_usb_device complete 16:10:32.966 (loader): remote connection 3084 opened 16:10:32.966 (loader): remote cmd from 3084: "show:arduino_attempt_reboot" 16:10:32.966 (loader): got request to show arduino rebooting message 16:10:32.966 (reboot 264): found Teensy Loader, version 1.52 16:10:32.966 (reboot 264): Sending command: show:arduino_attempt_reboot 16:10:32.971 (reboot 264): Sending command: comment: Teensyduino 1.52 - WINDOWS (teensy_reboot) 16:10:32.971 (loader): remote cmd from 3084: "comment: Teensyduino 1.52 - WINDOWS (teensy_reboot)" 16:10:32.971 (loader): remote cmd from 3084: "status" 16:10:32.973 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:32.973 (reboot 264): do_reset (serial) COM17 16:10:32.974 (loader): remote cmd from 3084: "status" 16:10:32.976 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:32.976 (reboot 264): status read, retry 0 16:10:33.015 (ports 2): callback C159 16:10:33.077 (loader): remote cmd from 3084: "status" 16:10:33.079 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:33.079 (reboot 264): status read, retry 1 16:10:33.180 (loader): remote cmd from 3084: "status" 16:10:33.182 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:33.182 (reboot 264): status read, retry 2 16:10:33.297 (loader): remote cmd from 3084: "status" 16:10:33.300 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:33.300 (reboot 264): status read, retry 3 16:10:33.407 (loader): remote cmd from 3084: "status" 16:10:33.409 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:33.409 (reboot 264): status read, retry 4 16:10:33.509 (loader): remote cmd from 3084: "status" 16:10:33.511 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:33.511 (reboot 264): status read, retry 5 16:10:33.611 (loader): remote cmd from 3084: "status" 16:10:33.613 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:33.613 (reboot 264): status read, retry 6 16:10:33.714 (loader): remote cmd from 3084: "status" 16:10:33.717 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:33.717 (reboot 264): status read, retry 7 16:10:33.817 (loader): remote cmd from 3084: "status" 16:10:33.819 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:33.819 (reboot 264): status read, retry 8 16:10:33.920 (loader): remote cmd from 3084: "status" 16:10:33.922 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:33.922 (reboot 264): status read, retry 9 16:10:34.023 (loader): remote cmd from 3084: "status" 16:10:34.025 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:34.025 (reboot 264): status read, retry 10 16:10:34.126 (loader): remote cmd from 3084: "status" 16:10:34.129 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:34.129 (reboot 264): status read, retry 11 16:10:34.229 (loader): remote cmd from 3084: "status" 16:10:34.231 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:34.231 (reboot 264): status read, retry 12 16:10:34.346 (loader): remote cmd from 3084: "status" 16:10:34.348 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:34.348 (reboot 264): status read, retry 13 16:10:34.455 (loader): remote cmd from 3084: "status" 16:10:34.460 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:34.460 (reboot 264): status read, retry 14 16:10:34.564 (loader): remote cmd from 3084: "status" 16:10:34.567 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:34.567 (reboot 264): status read, retry 15 16:10:34.674 (loader): remote cmd from 3084: "status" 16:10:34.676 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:34.676 (reboot 264): status read, retry 16 16:10:34.783 (loader): remote cmd from 3084: "status" 16:10:34.787 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:34.787 (reboot 264): status read, retry 17 16:10:34.892 (loader): remote cmd from 3084: "status" 16:10:34.895 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:34.895 (reboot 264): status read, retry 18 16:10:35.002 (loader): remote cmd from 3084: "status" 16:10:35.005 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:35.005 (reboot 264): status read, retry 19 16:10:35.111 (loader): remote cmd from 3084: "status" 16:10:35.114 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:35.114 (reboot 264): status read, retry 20 16:10:35.221 (loader): remote cmd from 3084: "status" 16:10:35.223 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:35.223 (reboot 264): status read, retry 21 16:10:35.330 (loader): remote cmd from 3084: "status" 16:10:35.332 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:35.332 (reboot 264): status read, retry 22 16:10:35.439 (loader): remote cmd from 3084: "status" 16:10:35.442 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:35.442 (reboot 264): status read, retry 23 16:10:35.542 (loader): remote cmd from 3084: "status" 16:10:35.545 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:35.545 (reboot 264): status read, retry 24 16:10:35.645 (loader): remote cmd from 3084: "status" 16:10:35.647 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:35.647 (reboot 264): status read, retry 25 16:10:35.748 (loader): remote cmd from 3084: "status" 16:10:35.750 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:35.750 (reboot 264): status read, retry 26 16:10:35.851 (loader): remote cmd from 3084: "status" 16:10:35.854 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:35.854 (reboot 264): status read, retry 27 16:10:35.954 (loader): remote cmd from 3084: "status" 16:10:35.956 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:35.956 (reboot 264): status read, retry 28 16:10:36.056 (loader): remote cmd from 3084: "status" 16:10:36.058 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:36.058 (reboot 264): status read, retry 29 16:10:36.159 (loader): remote cmd from 3084: "status" 16:10:36.162 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:36.162 (reboot 264): status read, retry 30 16:10:36.263 (loader): remote cmd from 3084: "status" 16:10:36.266 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:36.266 (reboot 264): status read, retry 31 16:10:36.378 (loader): remote cmd from 3084: "status" 16:10:36.380 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:36.380 (reboot 264): status read, retry 32 16:10:36.488 (loader): remote cmd from 3084: "status" 16:10:36.491 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:36.491 (reboot 264): status read, retry 33 16:10:36.592 (loader): remote cmd from 3084: "status" 16:10:36.594 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:36.594 (reboot 264): status read, retry 34 16:10:36.695 (loader): remote cmd from 3084: "status" 16:10:36.697 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:36.697 (reboot 264): status read, retry 35 16:10:36.798 (loader): remote cmd from 3084: "status" 16:10:36.800 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:36.800 (reboot 264): status read, retry 36 16:10:36.870 (ports 2): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 16:10:36.870 (ports 197): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 16:10:36.871 (ports 197): remove: loc=usb:0/140000/0/5/2 16:10:36.871 (ports 197): usb_remove: usb:0/140000/0/5/2 16:10:36.871 (ports 197): nothing new, skipping HID & Ports enum 16:10:36.871 (ports 2): remove: loc=usb:0/140000/0/5/2 16:10:36.871 (ports 2): usb_remove: usb:0/140000/0/5/2 16:10:36.871 (ports 2): nothing new, skipping HID & Ports enum 16:10:36.901 (loader): remote cmd from 3084: "status" 16:10:36.903 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:36.903 (reboot 264): status read, retry 37 16:10:37.004 (loader): remote cmd from 3084: "status" 16:10:37.006 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:37.006 (reboot 264): status read, retry 38 16:10:37.107 (loader): remote cmd from 3084: "status" 16:10:37.108 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:37.108 (reboot 264): status read, retry 39 16:10:37.209 (loader): remote cmd from 3084: "status" 16:10:37.210 (reboot 264): Status: 1, 1, 0, 107, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:37.210 (reboot 264): status read, retry 40 16:10:37.226 (ports 197): WM_DEVICECHANGE DBT_DEVICEARRIVAL 16:10:37.226 (ports 2): WM_DEVICECHANGE DBT_DEVICEARRIVAL 16:10:37.227 (ports 2): found_usb_device, id=\\?\usb#vid_16c0&pid_0478#000186c6#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:10:37.227 (ports 2): found_usb_device, loc=usb:0/140000/0/5/2 Port_#0002.Hub_#0006 16:10:37.227 (ports 2): found_usb_device, hwid=USB\VID_16C0&PID_0478&REV_0105 16:10:37.227 (ports 2): found_usb_device, devinst=0000001f 16:10:37.227 (ports 2): add: loc=usb:0/140000/0/5/2, class=HID, vid=16C0, pid=0478, ver=0105, serial=000186c6, dev=\\?\usb#vid_16c0&pid_0478#000186c6#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:10:37.227 (ports 2): hiddev_from_devinst_list: iface=0 16:10:37.227 (ports 197): found_usb_device, id=\\?\usb#vid_16c0&pid_0478#000186c6#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:10:37.227 (ports 197): found_usb_device, loc=usb:0/140000/0/5/2 Port_#0002.Hub_#0006 16:10:37.227 (ports 197): found_usb_device, hwid=USB\VID_16C0&PID_0478&REV_0105 16:10:37.227 (ports 197): found_usb_device, devinst=00000027 16:10:37.227 (ports 197): add: loc=usb:0/140000/0/5/2, class=HID, vid=16C0, pid=0478, ver=0105, serial=000186c6, dev=\\?\usb#vid_16c0&pid_0478#000186c6#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:10:37.227 (ports 197): hiddev_from_devinst_list: iface=0 16:10:37.228 (ports 2): found_usb_device complete 16:10:37.228 (ports 197): found_usb_device complete 16:10:37.230 (ports 2): usb_add: usb:0/140000/0/5/2 [no_device] (Teensy 4.1) Bootloader 16:10:37.230 (ports 197): usb_add: usb:0/140000/0/5/2 [no_device] (Teensy 4.1) Bootloader 16:10:37.323 (loader): remote cmd from 3084: "status" 16:10:37.323 (loader): Device came online, code_size = 8126464 16:10:37.323 (loader): Board is: Teensy 4.1 (IMXRT1062), version 1.05 16:10:37.338 (loader): File "SerialEventsTest.ino.hex". 37740 bytes, 0% used 16:10:37.338 (loader): set background IMG_ONLINE 16:10:37.353 (loader): File "SerialEventsTest.ino.hex". 37740 bytes, 0% used 16:10:37.353 (loader): elf appears to be for Teensy 4.1 (IMXRT1062) (8126464 bytes) 16:10:37.353 (loader): elf binary data matches hex file 16:10:37.353 (loader): elf file is for Teensy 4.1 (IMXRT1062) 16:10:37.353 (loader): begin operation 16:10:37.376 (reboot 264): Status: 1, 1, 1, 108, 4, 1, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:37.384 (loader): flash, block=0, bs=1024, auto=1 16:10:37.384 (loader): gauge old value = 0 16:10:37.384 (loader): flash, block=1, bs=1024, auto=1 16:10:37.575 (loader): gauge old value = 1 16:10:37.575 (loader): remote cmd from 3084: "status" 16:10:37.576 (loader): flash, block=2, bs=1024, auto=1 16:10:37.576 (reboot 264): Status: 1, 1, 1, 108, 4, 1, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:37.592 (loader): gauge old value = 2 16:10:37.592 (loader): flash, block=3, bs=1024, auto=1 16:10:37.592 (loader): gauge old value = 3 16:10:37.592 (loader): flash, block=4, bs=1024, auto=1 16:10:37.593 (loader): gauge old value = 4 16:10:37.597 (loader): flash, block=5, bs=1024, auto=1 16:10:37.598 (loader): gauge old value = 5 16:10:37.600 (loader): flash, block=6, bs=1024, auto=1 16:10:37.600 (loader): gauge old value = 6 16:10:37.603 (loader): flash, block=7, bs=1024, auto=1 16:10:37.603 (loader): gauge old value = 7 16:10:37.606 (loader): flash, block=8, bs=1024, auto=1 16:10:37.606 (loader): gauge old value = 8 16:10:37.609 (loader): flash, block=9, bs=1024, auto=1 16:10:37.609 (loader): gauge old value = 9 16:10:37.612 (loader): flash, block=10, bs=1024, auto=1 16:10:37.612 (loader): gauge old value = 10 16:10:37.614 (loader): flash, block=11, bs=1024, auto=1 16:10:37.615 (loader): gauge old value = 11 16:10:37.617 (loader): flash, block=12, bs=1024, auto=1 16:10:37.617 (loader): gauge old value = 12 16:10:37.619 (loader): flash, block=13, bs=1024, auto=1 16:10:37.619 (loader): gauge old value = 13 16:10:37.622 (loader): flash, block=14, bs=1024, auto=1 16:10:37.622 (loader): gauge old value = 14 16:10:37.624 (loader): flash, block=15, bs=1024, auto=1 16:10:37.624 (loader): gauge old value = 15 16:10:37.626 (loader): flash, block=16, bs=1024, auto=1 16:10:37.626 (loader): gauge old value = 16 16:10:37.628 (loader): remote cmd from 3084: "status" 16:10:37.628 (reboot 264): Status: 1, 1, 1, 108, 4, 1, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:37.629 (loader): flash, block=17, bs=1024, auto=1 16:10:37.629 (loader): gauge old value = 17 16:10:37.631 (loader): flash, block=18, bs=1024, auto=1 16:10:37.631 (loader): gauge old value = 18 16:10:37.634 (loader): flash, block=19, bs=1024, auto=1 16:10:37.634 (loader): gauge old value = 19 16:10:37.636 (loader): flash, block=20, bs=1024, auto=1 16:10:37.636 (loader): gauge old value = 20 16:10:37.639 (loader): flash, block=21, bs=1024, auto=1 16:10:37.639 (loader): gauge old value = 21 16:10:37.641 (loader): flash, block=22, bs=1024, auto=1 16:10:37.641 (loader): gauge old value = 22 16:10:37.643 (loader): flash, block=23, bs=1024, auto=1 16:10:37.644 (loader): gauge old value = 23 16:10:37.646 (loader): flash, block=24, bs=1024, auto=1 16:10:37.646 (loader): gauge old value = 24 16:10:37.648 (loader): flash, block=25, bs=1024, auto=1 16:10:37.648 (loader): gauge old value = 25 16:10:37.650 (loader): flash, block=26, bs=1024, auto=1 16:10:37.650 (loader): gauge old value = 26 16:10:37.652 (loader): flash, block=27, bs=1024, auto=1 16:10:37.653 (loader): gauge old value = 27 16:10:37.654 (loader): flash, block=28, bs=1024, auto=1 16:10:37.655 (loader): gauge old value = 28 16:10:37.657 (loader): flash, block=29, bs=1024, auto=1 16:10:37.657 (loader): gauge old value = 29 16:10:37.659 (loader): flash, block=30, bs=1024, auto=1 16:10:37.659 (loader): gauge old value = 30 16:10:37.661 (loader): flash, block=31, bs=1024, auto=1 16:10:37.661 (loader): gauge old value = 31 16:10:37.663 (loader): flash, block=32, bs=1024, auto=1 16:10:37.663 (loader): gauge old value = 32 16:10:37.665 (loader): flash, block=33, bs=1024, auto=1 16:10:37.665 (loader): gauge old value = 33 16:10:37.667 (loader): flash, block=34, bs=1024, auto=1 16:10:37.668 (loader): gauge old value = 34 16:10:37.670 (loader): flash, block=35, bs=1024, auto=1 16:10:37.670 (loader): gauge old value = 35 16:10:37.672 (loader): flash, block=36, bs=1024, auto=1 16:10:37.672 (loader): gauge old value = 36 16:10:37.680 (loader): sending reboot 16:10:37.681 (loader): begin wait_until_offline 16:10:37.687 (ports 2): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 16:10:37.687 (ports 197): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 16:10:37.688 (ports 2): remove: loc=usb:0/140000/0/5/2 16:10:37.688 (ports 2): usb_remove: usb:0/140000/0/5/2 16:10:37.688 (ports 2): nothing new, skipping HID & Ports enum 16:10:37.688 (ports 197): remove: loc=usb:0/140000/0/5/2 16:10:37.688 (ports 197): usb_remove: usb:0/140000/0/5/2 16:10:37.688 (ports 197): nothing new, skipping HID & Ports enum 16:10:37.732 (loader): offline, waited 1 16:10:37.732 (loader): end operation, total time = 0.379 seconds 16:10:37.733 (loader): set background IMG_REBOOT_OK 16:10:37.736 (loader): redraw timer set, image 14 to show for 1200 ms 16:10:37.736 (loader): remote cmd from 3084: "status" 16:10:37.738 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 16:10:37.738 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 16:10:37.738 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 16:10:37.738 (loader): HID/win32: vid:1B80 pid:B406 ver:0100 16:10:37.738 (loader): HID/win32: vid:046D pid:C534 ver:2901 16:10:37.738 (loader): HID/win32: vid:046D pid:C534 ver:2901 16:10:37.738 (loader): HID/win32: vid:046D pid:C534 ver:2901 16:10:37.738 (loader): HID/win32: vid:046D pid:C534 ver:2901 16:10:37.738 (loader): HID/win32: vid:0764 pid:0501 ver:0001 16:10:37.739 (reboot 264): Status: 1, 1, 0, 108, 4, 0, T:\TEMP\arduino_build_986240\, SerialEventsTest.ino.hex 16:10:37.739 (reboot 264): status read, retry 41 16:10:37.739 (reboot 264): Success 16:10:37.739 (reboot 264): Disconnect 16:10:37.753 (loader): remote connection 3084 closed 16:10:37.755 (loader): remote connection 3676 closed 16:10:37.902 (serialmon 265): Begin, version=1.52, high-res time 16:10:37.902 (serialmon 265): listening for location: usb:0/140000/0/5/2 16:10:37.902 (serialmon 265): LoadLibrary cfgmgr32 ok 16:10:37.902 (serialmon 265): LoadLibrary ntdll ok 16:10:37.909 (serialmon 265): callback 0024 16:10:37.909 (serialmon 265): callback 0081 16:10:37.914 (serialmon 265): callback 0083 16:10:37.915 (serialmon 265): hWnd = 4265374 16:10:37.918 (serialmon 265): loop stdin, ready=262143 16:10:37.919 (serialmon 265): nothing new, skipping HID & Ports enum 16:10:37.925 (loader): remote connection 3528 opened 16:10:38.029 (ports 2): WM_DEVICECHANGE DBT_DEVICEARRIVAL 16:10:38.029 (ports 197): WM_DEVICECHANGE DBT_DEVICEARRIVAL 16:10:38.030 (serialmon 265): WM_DEVICECHANGE DBT_DEVICEARRIVAL 16:10:38.030 (ports 2): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:10:38.030 (ports 2): found_usb_device, loc=usb:0/140000/0/5/2 Port_#0002.Hub_#0006 16:10:38.030 (ports 2): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0280 16:10:38.030 (ports 2): found_usb_device, devinst=00000021 16:10:38.030 (ports 2): add: loc=usb:0/140000/0/5/2, class=Ports, vid=16C0, pid=0483, ver=0280, serial=1000380, dev=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:10:38.030 (ports 2): comport_from_devinst_list attempt 16:10:38.030 (ports 2): found Ports in classguid_list at index=0 16:10:38.030 (ports 2): port COM17 found from devnode 16:10:38.030 (ports 2): found_usb_device complete 16:10:38.030 (ports 197): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:10:38.030 (ports 197): found_usb_device, loc=usb:0/140000/0/5/2 Port_#0002.Hub_#0006 16:10:38.030 (ports 197): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0280 16:10:38.030 (ports 197): found_usb_device, devinst=00000004 16:10:38.030 (ports 197): add: loc=usb:0/140000/0/5/2, class=Ports, vid=16C0, pid=0483, ver=0280, serial=1000380, dev=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:10:38.030 (ports 197): comport_from_devinst_list attempt 16:10:38.030 (ports 197): found Ports in classguid_list at index=0 16:10:38.030 (ports 197): port COM17 found from devnode 16:10:38.030 (ports 197): found_usb_device complete 16:10:38.031 (serialmon 265): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:10:38.031 (serialmon 265): found_usb_device, loc=usb:0/140000/0/5/2 Port_#0002.Hub_#0006 16:10:38.031 (serialmon 265): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0280 16:10:38.031 (serialmon 265): found_usb_device, devinst=00000006 16:10:38.031 (serialmon 265): add: loc=usb:0/140000/0/5/2, class=Ports, vid=16C0, pid=0483, ver=0280, serial=1000380, dev=\\?\usb#vid_16c0&pid_0483#1000380#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 16:10:38.031 (serialmon 265): comport_from_devinst_list attempt 16:10:38.031 (serialmon 265): found Ports in classguid_list at index=0 16:10:38.031 (serialmon 265): port COM17 found from devnode 16:10:38.031 (serialmon 265): found_usb_device complete 16:10:38.031 (ports 2): usb_add: usb:0/140000/0/5/2 COM17 (Teensy 4.1) Serial 16:10:38.031 (ports 197): usb_add: usb:0/140000/0/5/2 COM17 (Teensy 4.1) Serial 16:10:38.032 (serialmon 265): usb_add: usb:0/140000/0/5/2 16:10:38.032 (serialmon 265): translate "COM17" -> "\\.\COM17" 16:10:38.221 (serialmon 265): GetDefaultCommConfig success 16:10:38.423 (serialmon 265): SetDefaultCommConfig success 16:10:38.423 (serialmon 265): Opened \\.\COM17 Serial 16:10:38.425 (ports 197): callback 001A 16:10:38.425 (ports 2): callback 001A 16:10:38.427 (serialmon 265): callback 001A 16:10:38.764 (ports 197): callback C159 16:10:38.764 (ports 197): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 16:10:38.764 (ports 197): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE 16:10:38.766 (ports 197): nothing new, skipping HID & Ports enum 16:10:38.934 (loader): redraw, image 9 16:10:44.839 (ports 2): callback C159 16:10:44.968 (serialmon 265): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 16:10:44.968 (serialmon 265): WM_DEVICECHANGE DBT_DEVICEARRIVAL 16:10:44.969 (serialmon 265): nothing new, skipping HID & Ports enum 16:10:45.001 (ports 2): WM_DEVICECHANGE DBT_DEVNODES_CHANGED 16:10:45.001 (ports 2): WM_DEVICECHANGE DBT_DEVICEARRIVAL 16:10:45.002 (ports 2): nothing new, skipping HID & Ports enum 16:10:47.104 (serialmon 265): callback C159 16:10:47.111 (ports 197): callback C159 16:10:47.116 (ports 2): callback C159 16:10:49.803 (serialmon 265): callback C159 16:10:49.833 (ports 197): callback C159 16:10:49.845 (ports 2): callback C159 16:10:52.450 (serialmon 265): callback C159 16:10:52.458 (ports 197): callback C159 16:10:52.463 (ports 2): callback C159 ... // CUT HERE were it was working as file too large ...