Hi all
Been programming my Teensy 3.2 fine.
Today, it throws up:
Previously selected Teensy port is offline.
1 other Teensy board found. Please select
this Teensy from the Tools > Ports menu.
But I have changed nothing. Updated the Teensy boards manager (it was the latest one anyway).
There are 2x ports listed in the Tools menu. One is for Teensy 3.2(serial), and the other for Teensy 3.1/3.2. Code says it uploaded using the Teensy 3.1/3.2 version, but doesn't. Then it throws that error above.
If you use the Teensy 3.2(serial) selection, then the code definitely loads, but then the serial monitor throws up this when you try to open it:
Error opening serial port 'usb:0/140000/0/6'. (Port busy)
So tired of this temperamental Arduino IDE. IT SUCKS
Been programming my Teensy 3.2 fine.
Today, it throws up:
Previously selected Teensy port is offline.
1 other Teensy board found. Please select
this Teensy from the Tools > Ports menu.
But I have changed nothing. Updated the Teensy boards manager (it was the latest one anyway).
There are 2x ports listed in the Tools menu. One is for Teensy 3.2(serial), and the other for Teensy 3.1/3.2. Code says it uploaded using the Teensy 3.1/3.2 version, but doesn't. Then it throws that error above.
If you use the Teensy 3.2(serial) selection, then the code definitely loads, but then the serial monitor throws up this when you try to open it:
Error opening serial port 'usb:0/140000/0/6'. (Port busy)
So tired of this temperamental Arduino IDE. IT SUCKS