Dazzer1234567

no worries, if you could give me some general pointers, i'm sure i can work out the rest!

Ah-ha, pray tell more, Claude Code told me that wasn't possible! Do you have any pointers how to achieve that?

Hi, i never heard of that format, does it have the same amount of grunt, features and i/o as the standard 4.1?

Ah-ha, thanks for the guidance! 🙏

OK, thanks! And after that, I hook ADD up to one of the other pins in order to set its address at start-up, right? Also, can you tell me: what are the two solder blobs to the either side of the trace you indicated (indicated with the green...

One of the test pads has delaminatated, so indeed that seems like a bad idea. I'm going to make a cable restraint and try to just use a short micro USB connector to a breakout plug on the case. But I still contend that this is a shortcoming of...

Install Visual Studio Code and the Claude plugin, then pay for some Claude time and it will do everything for you....... so you won't need to do any coding or even look at the code, you just need to prompt Claude. Although some basic...

Hi folks, I picked up some cheapo MPR121 boards from Amazon, but now the chickens are coming home to roost because I've discovered that they tie ADD internally to ground (why?!), meaning i can't put several of them on the same 12C bus. Claude...

That's worth thinking about. Maybe i can find a more exotic connector to mitigate that risk. Maybe I'll take a look at GX16-4. Isn't this a little bit of a weak point of the Teensy? I mean, it lacks a really robust way to connect to your...

Hi folks, Despite being a total noob with electronics / coding / Teensy etc, I'm planning to turn my first Teensy project into a commercial product. I'm making a DAW controller (mated to a custom, bespoke DAW), that will need to be connected...