defragster's latest activity

Like this one - same brand cheaper without Bt - : https://www.amazon.com/UGREEN-AX900-High-gain-WiFi-Adapter/dp/B0D3WY6KMN

I think I cracked the problem of what to do with array elements and sub-structures and arrays of sub-structures. I also figured out how to automatically detect and set mixed w1c and non-w1c fields properly. The compiler can now also catch: 1...

I never tested any of the original two chips, I just had them made an dispatched. So what you said is correct.

If @wwatson had one that might be the fastest way to know. @Dogbone built his minimal boards and other than possible sanity hardware checks AFAIK they shipped for forum testing. Software is known ready for chip change and @wwatson seems to have...

New link to QNEthernet_WIFI_0.36.0: https://github.com/wwatson4506/QNEthernet_WIFI/tree/QNEthernet_WIFI_0.36.0 Still working on recovering the original QNEthernet_WIFI branch. I backup every day so trying to find the latest one...

As far as the CYW4343W (1DX) chip check out post #117 in this thread. I explained to @gigapod what was done with the 1DX chip up till now. I did not have access to the 1YN board for testing. So can't comment on what others may have developed...

@PaulStoffregen or other might investigate or clarify if that is a safe update/proper to make to the Teensy boards.txt. Just a suggestion to try: Move that EDIT into boards.local.txt (and restore the original command) and restart the IDE and see...

I posted about my powered HUB/Drive box beign bad and nobody else ever found one - though not sure anyone else had a DIY bare 2.5" Drive box HUB in one. It would be an easy quick test if are looking for it. And in my case it caused no harm - just...

@Dogbone06 can answer - but his goal/effort was building the test boards then forwarded just the first boards to forum members. He acquired a batch of both chips but only the first was shipped out AFAIK.

@sparkfro - Actually if there was no communication at all without the WL_REG_ON and WL_IRQ pins pins being changed you would have probably seen the CMD52 errors then.So that is indicating that we do probably have comms with the chip. That's...

Looks like we have some more work ahead of us. I have spent the last two days stepping through the PICO 2W initialization process and most of it is similar to the CYW4343W. Will probably need to start at the beginning diagnosing with my LA...

A while ago I bought a $5 USB wifi/bluetooth adapter from aliexpress. They seem to be very plentiful, advertised under a few different brands but usually including a mention of AX900, Wifi6 and Bluetooth 5.3 or 5.4. I thought it would be a...

A well behaved HUB (following the rules?) won't put power back on the Teensy USB Host 5V pin. Have a HUB HDD drive box HERE that is NOT well behaved. Once the code starts 5V comes back to the Teensy when it is unpowered, keeping the Teensy...

I do have the PICO 2W which uses the 1YN chip. I have not used it yet But I am in the process of setting up to use it. I also have PICO debug probe so once I figure out how to use those then it should help to debug things if needed...

Sorry - Not sure why it does not compile but the latest version is listed in post #209. This is the link: https://github.com/wwatson4506/QNEthernet_WIFI/tree/QNEthernet_WIFI_0.36.0 It is based on @shawn's latest version (0.36.0) of QNEthernet...

That seems to be expected as it is getting a push of firm ware for the wrong chip?

Ooh, aah, prototype! (we order prototypes in black, final will be red) @wwatson I downloaded the latest master branch of https://github.com/wwatson4506/QNEthernet_WIFI. I tried the cyw43_scan.ino, but it failed to compile. I see there are a...

Last I saw was this on prior forum page:

Nice tool. Have to think about. Right now I have been using an old version of telemetry viewer. If interested here is the link: http://www.farrellf.com/TelemetryViewer/ Always good to have options. Have to dig into it a bit more. Thanks for...