Title: How to Trick Wokwi to Emulate an Unsupported Teensy 4.0? (Hardware & Software Emulation)
The Problem:
I wanted to develop a project combining the Teensy 4.0, the Teensy Audio Shield Rev D, and a TFT ILI9341 Screen. However, Wokwi emulator...
> Yes, I also noticed the PHP language window. I thought you were going to develop the page for Teensy 4.0 and Teensy 4.1.
>
> I have a question: Why are there no simulation programs for Teensy like there are for other electronic boards? I know...
Did you connect the MIDI circuit in msg #8 to your Teensy 4.0? Did it work?
Nobody can give useful help if you withhold info about what you've actually done and what result you saw. Remember, we can't see your screen, we can't see your...
@fouzi: In an attempt to make a (human) determination, please make a post that includes the two different membership titles of the person that you most recently asked for specific help. Then make a statement about the Teensy that is known to be...
Looks like it should work.
But be careful with the 5V and 3.3V wires, which are physically next to each other. If 3.3V accidentally touches 5V, even for a brief moment, Teensy 4.0 will be destroyed.
TRANSLATION (by translate.google.com):
Hello everyone. I have created this schematic/design but haven't tested it yet. Before I do, I would like to consult with experts to ensure there are no errors. Please correct any mistakes you find. Thank...
Hello! I hope this message finds you well. It is a pleasure to connect with you. My friend, you are absolutely right. I used to rely on automated translation, which is why some people might not have understood me before, as the translation often...
أضفتُ المقاومة 10 كيلو أوم لتفريغ سعة القاعدة الداخلية وتسريع زمن الاستجابة. أنا فخورٌ حقًا بالتعلم من شخصٍ مُلهمٍ وواسع المعرفة مثلك، ورأيك يعني لي الكثير. أُقدّر توجيهاتك كثيرًا؛ فطلب العلم نور، والجهل ظلام. شكرًا جزيلًا لك، وسأكون ممتنًا جدًا...
Normally pin 7 on 6N138 would be unconnected. See recommended schematic at this page.
https://www.pjrc.com/teensy/td_libs_MIDI.html
But if you design a PCB, you could simple not add the resistor during soldering, or choose a different resistor...
مرحباً جميعاً، لقد صممت هذا المخطط/التصميم، لكنني لم أجربه بعد. لذا، قبل تجربته، أود استشارة المختصين للتأكد من خلوه من أي أخطاء. أرجو تصحيحها إن وجدت، وشكراً لكم. أنتظر ردودكم.