phillipps76

I tested with and without the audio board (then with two other audio boards) it only worked without the board. I found this information: https://forum.pjrc.com/index.php?threads/spdif-input-and-output.45394/ it says: "As when using dual Audio...

great idea. then I can test that i have spdif working right. thank you.

I think I'm figuring out that a simple SPDIF connection is not what it needs. I don't really know how to use an oscilloscope but that's my next step to try. I'll post the results.

3V on the teensy board. the spec sheet said 3V is ok.

I fixed it. Much better. Thank you!

can anyone give me a lead on how to use the SPDIF input for the audio board? I am trying with a RX147L and have it wired to ground, vcc and pin15 running the code below. I have tried it with a .1uf cap between gnd and vcc as the spec sheet...

I vote for boards that add LoRa, NB Cellular and GPS. Not so much becuase it's hard to add a module but for the integration we would get by having something like the Audio Design Tool. But more exciting to me would be to attach a Sipeed M1S...

Robin and I have a meeting with SparkFun next week. Among topics we'll likely discuss is possible new hardware. Teensy 5.x is not up for discussion (NXP isn't shipping Cortex-M85 yet). Neither is RT1170 up for discussion right now, as the...