sweentj

Hey Paul thanks for taking a look :) Yes wm8904_reg_dump() is working, I've listed the output below. 2. MCLK is present. I've edited the output_i2s.cpp code to set MCLK to 12.288MHz for 256 * fs where fs=48kHz. Maybe this was wrong and it...

Hello All, I wanted to create a project with the Teensy4 and WM8904 audio codec. I'm currently trying to get a barebones test off the ground by just sending a signal (1khz 0.5Vpp sinewave) through the bypass signal path. I've created a custom...