Search results

  1. R

    TCD1304 with teensy 3.2

    I don't know 4.0 good enough. In my description above i told a lot an the speed of the ADC.
  2. R

    TCD1304 with teensy 3.2

    Hi M Nelson there is a list of connections in the file TCD1304neg.ino. Reiner
  3. R

    TCD1304 with teensy 3.2

    Hi Davide, fine it works. Yes, it's very sensible. I don't believe there is a lot to do by firmware or electronics, if there is too much light the CCD is saturated, then you can only shorten t_int, probably down to 10 microseconds ( by sending 't' to teensy) May be a filter can help? Reiner
  4. R

    TCD1304 with teensy 3.2

    Hi Davide, I don't rally know if the transistor fits but I think it's not critical. The transistors emitter should be connected to 3,3V (with 2,2k) not 5V, because the ADC can only work upto 3,3V. Your connections are correct. Pin 6 must not be connected. I've added to diagrams from an...
  5. R

    TCD1304 with teensy 3.2

    Hi Davide, thanks for your interest. I don't know if it is critical with DG or AP, and don't believe. The reaction of your TCD seems to be the wrong way. Have a look at https://tcd1304.wordpress.com/tcd1304-pcb/ . The three pulses controlling the CCD are negated on the pcb and my software is...
  6. R

    TCD1304 with teensy 3.2

    Hi, the CCD linear image sensor TCD1304 can be driven with a teensy 3.2. There is a very detailed description on the TCD1304 at EsbenRossels page http://tcd1304.wordpress.com. His description is perfect, I have learned a lot there, thank you very much, Esben. Here some remarks on creating...
  7. R

    TCD1304 with teensy 3.2

    Hi, the CCD linear image sensor TCD1304 can be driven with a teensy 3.2. I will post my code on afew days.
Back
Top