Search results

  1. T

    Teensy fuse values

    I notice on teensy3.2 that the fuse is connected between USB and VIN, but on teensy3.5 and > that VIN is connected directly to USB. Why does this difference exist?
  2. T

    teensyduino linux installer issue

    Thanks for the replies. You provided the help I needed. T
  3. T

    teensyduino linux installer issue

    I am having a technical problem using the teensyduino installer for linux. When I am at 'Select Arduino Folder' part of the install it does not recognize the arduino folder and the 'next' button is grayed out. How do I get past this? Thanks.
  4. T

    "Detecting libraries used... Error compiling for board Teensy 3.2 / 3.1"

    I reverted to older versions.. Arduino = 1.6.1 Teensyduino = 1.21 I chose these because it replicated a working setup on on older Win10 machine. I am able to get my sketches to compile without the previous reported error. I suspect it is an Arduino issue, but I would appreciate any advice on...
  5. T

    "Detecting libraries used... Error compiling for board Teensy 3.2 / 3.1"

    I just installed Arduino 1.18.12 and Teensyduino 1.51. I opened the blink example for teensy3.1. The first compile and load was successful, but the second attempt results in a compile error. The only way to get past this is to restart Arduino, but the compile will only work on the first...
  6. T

    teensy 3.1 SD/SPI clock rates 'n such

    I am also trying to make several of the micro SD adapters work that have the 5V translation chips (LM1117-33 and SN74LVC125A). Is the SPI speed limitation from the chips or the physical connections on the PCB? I am going to remove the chips and replace the connections with 0ohm chip resistors...
Back
Top