Search results

Hi Paul, have you some new info about the USB-C implementation? This feature becomes more and more important for a lot of users....

Hi, Paul, thank so much for the prompt reply. There's in this forum someone IOS/Android expert that could help me? this is an out of mind limitation!!!

Hi there, my question is very simple: I use my tablet to send audio to the teensy 4.1. At the same time I need to charge my tablet via the SAME usb plug. This seems impossible. Once powering Vin with +5V, my tablet stops the streaming and start charging or continue to stream but stop charging. I...

Hi Paul, in the image IN2 refers to pin 6 but in my pinout IN2 is referenced on pin 5. What is right? Using only channel 1-2 and channel 3-4, is that table OK? MCLK1, BCLK1 and LRCLK1 are common to IN 1-2 and OUT1A-OUT1B ? Thanks a lot as usual ! Charlie48

Hi Paul, your suggestion are very useful. I thought to use the AK4619. First is 4x4, second is cheap and easy to find here in europe. I attached the pdf datasheet. At page 32/32 you can see the various settings. Now, I do not want to configure the chip but by default the data lenght is 24 bit...

Hi all, has someone read my post? Atached the low resolution image. Could someone post a better resolution of the same image ? Thanks a lot Charlie48 https://forum.pjrc.com/attachment.php?attachmentid=30168&d=1674046613&thumb=1

Hi there, the idea is to create a karaoke machine where the music source is a common tablet. The total inputs would be: 2 microphones, 1 stereo line for instruments and the tablet connected via usb; it should be capable to stream 2 audio files at the same time plus MIDI data used to control all...

Hi hakon, I'm very interested to PCM3168 schematic. First I would like to know if iit is correct. Has someone used it to make a well running PCB ? If so, could someone resend a copy of this schematic? The one I have has bad resolution and is impossible to read all the values. Thanks a lot...