Search results

Great, ordered some of those!

I see some of you are using female headers that sticks out so one can use a breadboard also, where do you get the long headers that fits these boards?

On the Raspberry Pi they used ethernet socket with magnetics/transformers to reduce cost and to reduce footprint, does that mean that this pulse chip wouldn't be needed? (and with magnetics one gets leds in the socket :) )

Ok, good, ordered a couple, so will see how it goes.

How did this go?, was thinking about ordering some boards from osh myself, did this adapter work for 3.1 and 3.2? (I guess not the 3.0) On the OSH park, the cutout doesn't show, is that done by osh park?, or do you need to cut out yourself?

Thanks! I think Paul earlier was talking about another version, another chip, with more gpio?, and debug stuff?, rather have that, than expanding the one we have. On the other hand, arduino uno vs arduino mega, one could consider such a game. I'd buy them all.

RS had a better shippingcost, still same as two of the chips though. The crystal is also diffcult, Farnell tells me that I have to buy 1000 (tape) of them, and that they come from us, so superexpensive shipping.. The crystal is said to have 50ppm, and 20pf load capacitanse, but on the...

The Cirrus chip used, CS4272-CZZ, it seems that it's not too available anymore.. Is it an bad idea to get it from ebay? Or are there any sources that doesn't require $30 in shipping for one chip?

http://www.digikey.com/product-detail/en/PC900V0NSZXF/425-2204-5-ND/720234

Gen1?, Don't know how many Spark Core they sold, but it's the Photon they sold 17k of, I ordered mine in January, and first now they are in the mail somewhere.

ready pinout for similar displays that you used for the spi demos?, or maybe other better displays?

Cool, will that be published ?, often deciphering others BOM can be a bit tedious.

cool, I need start put that BOM together for an order then :) Need to find out how digikey works for Norway..

Didn't get any information on the order atleast..

I kinda like the formfactor of these boards: http://www.schmalzhaus.com/UBW32/ http://www.cypress.com/?rID=108038 Littlebit difficult to take them out of breadboard after plugging them though :) But on the other hand, the Freedom boards, like...

Farnell is stocking some coilcraft, the closest I found was MSS1038-522NLC, not sure what the NLB and NLC stands for?

Will teensy be installable through the board manager eventually? atleast it looks promising? https://learn.adafruit.com/adding-custom-boards-to-the-arduino-v1-6-board-manager/overview and adafruits repository: https://github.com/adafruit/adafruit-arduino-proxy

Got mine today! :)

Ah, I was wondering since Paul said the final green boards was beeing soldered, so I thought they where final.. So if we pre-order now, we are going to get the ones from production when everything is done, right?

Are all Teensy's handsoldered?

or this type of things that also have sata: https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXIno-LIME2/open-source-hardware

Yes, but since they wrote the windows7/8 kernel for ARM, why start backporting XP? But I wonder what wil become of ARM based windows, I thought I read somewhere that Windows RT is gone after win8.1, but maybe they continue on an sort of embedded version in the future? Windows Embedded was also...

The windows this Raspberry is same as for the Intel Galileo boards, it's only for easy IoT development, using .net and so on, no GUI, so you could maybe compare it to DOS instead of Windows..

I see lots of comment about touch in this thread, but is this a touch display?, and is this the one with sd-card on the back? Btw, the daughter card seen on the picture there, how do I get that?, does it come with the display, or do I have to make it myself?

Yepp, email works now.

None here yet, lets see if I get the next..

What about notification emails when you subscribe to an thread?, I'm not getting those either

That looks fine, have all parts, except for the pc900, but I have the 6n138 so that should be just as well..

Black and white also have the problem that it is difficult to see the traces under it. Green and read are better.

Yes, but why always involve an computer? ;)

Great, will try to look for that. If it was sold in the same manner as you sell the headers and the thumbweel resistor, I would'nt waste shipping :), but if there is support or not, with time, someone would do it, I would definately try to do something when I get up to speed on this, but...

Probably going to order this board, but some question What is the technical name of that header? (trying to find it otherplaces, they looks nice for some other projects I have) The flash-chip, are you going to sell that?, I'm not very keen on going to mouser for an order, which will give me $30...