Search results

Hi Paul, The problem with the arduino-cli upload came back after I had to re-build everything on the Raspberry PI 4 after a serious problem. I'm now using the Rapberry Pi OpenPlotter 64-bit; I was using the 32-bit version before. The arduino-cli version is 0.27.1 I have followed your...

Thanks a lot Paul as this is exactly what was missing. I took the udev info at https://www.pjrc.com/teensy/loader_linux.html

Also, the Teensy Loader version 1.57 I have tried a different USB port with the same problem

Thanks Paul for the suggestion as it allowed me to go much further but not to the final destination. Now the arduino-cli board list looks good pi@openplotter:~/Arduino/Nmea_Controller $ arduino-cli board list Port Protocol Type Board Name FQBN Core...

When I read the different threads about the Teensy 4.1, Arduino and arduino-cli, I find a lot of information but nothing that solve the problems on my side so I might be missing something. My environment is under Raspberry pi 4 with a Teensy 4.1 connected on the USB port In the Arduino IDE...