Search results

Hi all, I'm looking for a way to toggle output port directly with the GPIOx_PTOR register as it's specified page 1336: https://www.pjrc.com/teensy/K20P64M72SF1RM.pdf My problem is to match the teensy3.2 pin with the register. If I want toggle pin 13 (embedded led), what is the register value...

Hi @recursing, Effectively, you are right, I've missing a 'e' in my search. I've renamed the symbol and the footprint. I made the bottom pads because I use with SMD male pin header like that in my project...

Hi all, I had looking for a Tensy 3.2's part in EasyEDA PCB software and it was not exist. So I decided to create it and it's a real pleasure to share it with the community :D Please feel free to make feedbacks if something is wrong, Bruno

Hi all, I've created and shared the Tensy 3.2's footprint for EasyEDA PCB software. Please feel free to feedback if something must be updated (pad places, pad names, etc).

Hi all, I am looking for a Tensy3.2's PCB to use as cape with EasyEDA. EasyEDA allows to import DXF file. Does it already exist or I will have to design ? In advance many thanks. Bruno

Thanks at all for your reply. I say that I stop the development under Mac to pass to Linux. I think I've tried everything (under OS X) but no results even if I would like to help someone under Mac. Under Linux, The Teensy/hidraw is recognized without problem and my project become fine started...

Hi, No Teensy appears as you can see. I've tried with my second Teensy but it's the same: nothing Sorry this screen shot is in french. Bruno

Hi, No Teensy appears as you can see. I've tried with my second Teensy but it's the same: nothing I've also change the cable to see if something change but no. Bruno

Hi All, Since I've updated my laptop under OS X - Yosemite, my Teensy is not longer recognized. If you don't want to loose some time ;-) Bruno.

Hi all, I'm always on my problem, It seem that Teensy does not appear as 'serial modem' in /dev/cu.xxxxxxxx even I can find out the Teensy in this listing: ioreg -c IOSerialBSDClient | grep -i usb | | | | +-o AppleUSBXHCI <class AppleUSBXHCI, id 0x100000231, registered, matched, active...

Hi all, I confirm that I've a problem with Teensy on my MacBook laptop ( OS X 10.9.4 ) Now I can see all USB devices with usb4java lib with java program (that it come from usb4java sample) and I can see my Teensy 3.1. The search result is (only for the interesting Teensy): Device 020/012...

Hi, Yes, the Serial Monitor has been closed to do a new test but nothing. I've beginning to test another java and jni lib that offers a low level API. May be is better than the hight level. I don't known but if it's work fine, I'll post the source. But if you have a track to help me ;-) Bruno.

Hi all, @jonhnyfp, please see my test source here. The part of usb dialogue come from Teensy example and the program can push all data to the "Monitor Serie" as you can see in the screen shot below: void setup(){ Serial.begin(38400); } int val; float v = 0.0F; const float...

Hi all, I can't obtain my Teensy in the usb list of connected device to my MacBook Air. The java rxtx library is used in my project. When my mobile is plugged, it's appear in the list. In doubt, I've unload Teensy uploader program but nothing change. The Teensy module appears in the device list...

Hi all, Here the benchmark with my Teensy 3.1. The goal was to known the max output frequency on DAC (A14 output). The conditions of tests are: . Teensy must generate an sine wave and square wave in "good form" with minor distortion or best, no distorsion. . Teensy program don't do nothing...

Hi all, Here the benchmark with my Teensy 3.1. The goal was to known the max output frequency on DAC (A14 output). The conditions of tests are: . Teensy must generate an sine wave and square wave in "good form" with minor distortion or best, no distorsion. . Teensy program don't do nothing...

Hi, Yes Mr drg, I don't known that is best solution but the goal is "how to reduce": - capacitors ajustement ( UHF spectrum ) - the number of component on the PCB - circuitry In a first time, 2 new teensy3.1 are expected and are not delivered yet :-( Thank at all. Bruno

Thank for your reply. In fact, I was looking for the easiest way to inject a signal to a NE612 without a colpitts. So as I understand it, the better it is Colpits and an analog output of Teensy3.1 to drive it in VCO. So, a question again. How can I set CLOCK speed in make file. With this...

Hi all, I searched for informations to known how I can generate 10Mhz to 15Mhz sinus signal on analog output (that it will be use to control a NE612 mixer). It's possible with Teensy 3.1 ? It's depend of the setup in makefile (from fresh generated project with avr-project cmd line )...