Search results

  1. V

    Mounting of ILI9341 TFT to complete project??

    Hi, I see this thread is pretty old but I thought I'd contribute anyway in case someone else is looking for solution. I've looked high and low for an off the shelf solution with no luck. The only thing I came up with, other than a home brew 3D printed or CNCed part is a custom laser cut...
  2. V

    Hole in the market

    Paul! The Teensy 3.1 is PERFECT (at least it's spec sheet is - don't have one yet)!! THANK YOU!! This is exactly what I needed to get my project off the ground!! YOU ROCK!!!
  3. V

    Hole in the market

    Glad to hear that there is a Teensy++ 3 in the works and I'll be excited to see what it can do. It's probably not cool to talk about competing products on your board but I just wanted to point out the Spark Core (https://www.spark.io) if you are not familiar with it. If this board came with a...
  4. V

    Hole in the market

    I love the teensy 3.0. It's tiny, powerful, easy and cheap. I use it for every project, even ones that do not need all the power and features because, well, why not? However, recently I have started to out grow the Teensy 3.0. I am doing projects that, for example use graphical displays and...
  5. V

    Dive Computer Project Brick Wall

    After reading the feedback from this and other sites I've posted this question to, I think you are right - this is the best option. It will be a little tricky in spots but I've decided to make all UI elements their own object that can calculate their image one line at a time. Since most items...
  6. V

    Dive Computer Project Brick Wall

    Hi, I am working on an open source scuba diving computer project (http://www.diydivecomputer.com) and I have run into a major problem. I am using a 2.7" Sharp Memory display which is 400 pixels x 240 pixels. After testing many displays, this is the perfect display for this project. I am using...
  7. V

    Teensy 3.0 LowPower examples don't work!

    Low Power Mode Paul, is this on your TODO list? Is there an ETA? Low power mode is critical for my project. I'd be willing to help in converting it.
  8. V

    Is my Teensy 3.0 broken?

    Wrong version Ahh.. I was running v1.05. I did not realize that teensyduino also installed the loader app and that it is a different version than if you downloaded it separately. I assume there is a good reason for the loader app being a different version if you download it separately but you...
  9. V

    Is my Teensy 3.0 broken?

    Working again As happened before, the board just started working again... Weird... Perhaps there is a loose solder joint someplace that opens when it warms up...
  10. V

    Is my Teensy 3.0 broken?

    I am running Mac OS 10.8.2 on both machines. As for the verbose output, if the device is not plugged in when I launch the Loader app, I get this: 16:17:06: Teensy Loader 1.06, begin program 16:17:06: File "Dive_Computer_Code.cpp.hex". 31504 bytes, 24% used 16:17:06: Listening for remote...
  11. V

    Is my Teensy 3.0 broken?

    Good cable - same problem... Paul, I've been using the Teensy 3.0 for about a week and have found that sometimes the Teensy loader app just can't seem to find it. I checked System Profiler and the device shows up the same as the images (both normally and after pressing the reset button) but I...
Back
Top