Search results

In "lv_fs_fatfs.c" I'm getting an error that ff.h is not found. I'm using the sdfat library and I set LV_USE_FS_FATFS 1 . Is there anything you had to do for that file to be found?

-----All sold-----

Yes, I'll message you now.

:confused: WHEN they were available they were $34 plus tax and shipping. What're talking about price gouging?

Just $40 each.

I have 25 teensy 3.6 for sale

Thank you for your help Kurt, I have figured out the problem and unfortunately it was operator error.

Hi Kurt, I really appreciate you taking the time to respond. This is the display I've ordered https://www.buydisplay.com/7-inch-lcd-module-capacitive-touch-screen-panel-i2c-spi-serial And this is the 4.3" display I'm currently using...

My project has been using the buydisplay 4.3" with the capacitive touch powered with a T3.6 and it works great. I now would like to use a larger display so I purchased four of their 7" with capacitive version. Same RA8875 driver chip and same pinouts and both are 3.3v version(J8 shorted).In my...

Thank you, I will keep and eye on that thread. Bare with me for a second, the period of 60Hz is 16.6ms which that period is captured by the flexTimer using edge capture mode. If I prescaled that by 128 I would get 129.6875μs. My thought is every time a rising edge is flagged, the pit or...

I did not know a 4.1 was in the works. I will definitely switch over when it is released.

I like the t4 but it just doesn't have enough pins for my project so until I can learn to work with multiplexers I'm stuck with the 3.6 for the moment. Do you happen to have a public github with your projects that I could poke around? I will also have 3 pwm outputs for harmonic correction which...

Good morning Eddie, I will be using ADC1 for other sampling down the line for things not so time sensitive so I would like to keep that module free. I have done some benchmark testing using just adc->adc0->analogread() on each of the 6 pins using a loop to go though the pins using intervalTimer...

Hello, I really appreciate everyone that helps us inexperienced programmers on here. I'm starting a project using a 3.6 and I have no code yet because I'd like to hear any input on where to start and maybe see other projects/threads that would help me get off the ground. I have had no luck so...

Hey Donziboy2 were you able to get your Gocart project to work? I'm starting a similar project as far as adc channel linking goes and would really appreciate hearing about any progress since your last post. cheers, Chris

Hi Gavin, were you able to get your project working with the single teensy linking the channels? I think I have a similar goal on a project I'm working on but I will be sampling 6 50-60Hz sine wave inputs on adc0 chaining the channels together. Thanks, Chris

Noob here also. Have you looked into FreqMeasureMulti?

Hello all and thanks in advance for any advice rendered. https://forum.pjrc.com/threads/26608-Frequency-Locked-Sine-Wave-Generator-Teensy-3-1?highlight=lock+sine is the original source and inspiration, though our application involves generators more directly. Apologies for the wordy preamble...

Thank you for your responses. Sorry for the lack of information in the original post. The LCD is a 040N004A https://www.vishay.com/displays/list/product-37317/ and yes the library I used with the arduino was the <LiquidCrystal> library. This is the code I used with the arduino but the R/W pin is...

Hello all, I'm new to programming I started with the arduino uno and have decided to step up to the teensy now so this is my first build. I'm having trouble finding any information on using a 40x4 lcd with the 3.6. I've spent quite a bit of time looking through the threads but can't seem to find...