Search results

Hi guys. About 6 mopnths ago we bought 8 or so Teensy 3.2 boards for a project. All of the boards have been working fine except one had just died. I am using it to control a paper tape reader unit. The board doessn't show up as a COM and the chip near the USB port gets hot. Is there anything I...

Hi everyone. I've just read the above thread about the Talkie library on Teensy 3.2 We have some Teensy 3.2's and a bunch of audio boards. Any ideas how I'd go about getting the talkie library to output through the Audio board's headphone socket? Thanks, Steve.

OK Thanks again for your help Paul. :) Also I just got the Demosauce sketch for the 2.2 TFT LCD working. :cool: Very nice!! As good as any Amiga Demo I ever saw.

Hi guys. We have loads of Teensy audio boards and 3.2 boards for a project. We were just wondering if there is a size limit to the names of the wav files on the sd card. For instance, if I have a file called 123456789.wav, is that too big? Is there a limit to the number of characters you can use...

Hi everyone from Sunny London. :cool: My GF and I have got a project going involving playing audio samples when someone walks by. We want to leave them in their place rather than having to set them up and take them down all the time. We want to use the Snooze library to send them to sleep at...

Yep. Sorry guys. Its on hannah's instagram account. Can you see it here? Its very short and its just an example of one of the samples playing. We'll do a proper video on Monday. :) https://www.instagram.com/mubasehannah/

Thanks everyone for the help you've given us in getting our "Lift playing Shakespeare" project working. We used Teensy 3.2's with Audio shields and the GUI, an HC-SR05 PIR and a BMP085 barometric pressure sensor to detect up or down motion of the lift. Here's a brief video showing it working in...

Hi Teensylovers. I'm working on a project that involves playing sounds from an SD card triggered by a pressure sensor in an elevator. Its all going well so far thanks to a lot of help from some of the lovely guys on here. As the project will be using batteries (we are using 3 AA batteries) can...

Hi Paul. Ive not looked into interrupts as I've got some better results using ping_median to average out the sensor data. Looks like the noise was caused by the data jumping.. Seems a lot smoother now. :)

audio sounding bad Hi guys and thanks for the input. OK, I've got some code here. It uses the Newping library as I'm using an HC-Sr04 ultrasonic. The sensor works fine but the audio sounds really jumpy. Do I need to use interrupts for the measuerment? What am I doing wrong? // Simple WAV file...

Thanks Michael this is great. I see you are using the flash memory chip. Can I do the same using the internal memory functions? As in AudioPlayMemory ?

Hi everyone. I'm having fun with some ultrasonic sensors (HC-SR04) and want to use them to change the volume of a sample being played through the audio board in real time. So when a person walks up to the ultrasonic it gets louser and vice versa... Can anyone help me with how I would do this...

Hi guys. Me and my GF are having loads of fun with our new Teensy 3.2 boards. Been wanting to use the Teensy 3 for years and now we have arrived. :) I have a question regarding a project we are working on. We want to trigger spoken word audio samples. We have the brilliant audio board to work...

Hi everyone. We're excited. The boards came today! :cool: So when I've done some other stuff I'll take a look at your nice long video. :) This is great. I've wanted to use the Teensy for a long time and now we have the opportunity!!

Hiya. OK, we've ordered 8 of each from Hobbyelectronics in York. :) I notice it uses a lot of the pins. If we want to use an accelerometer as well will we still be able to do that? I know with SPI you can just select a different /CE pin for each device ...

OK. I assume you're talking straight from the DAC pin on the Teensy board. What about if I'm using the Audio breakout board? (the one with the sgtl5000 codec on it.)

ooh. one more question, do we need powered speakers for the audio board or can we get away with unpowered? We only need something small for the lifts and maybe something a little louder for the corridors..

Hi Paul. OK thanks :) , well the ultrasonics will be placed in a corridor to reflect presence/movement of people. As its all concrete walls we SHOULD be OK...hmmmm... Ahhh, also, would it be possible to use a PIR sensor to wake up the Teensy from a sleep mode? We'd like to do this as well so as...

Teensy Audio capabilities sans audio card Hi Paul. Thanks for the info. Well, I've just seen your Audio board and think it'll be well worth using them instead of just the dac pin. :) I've come across the SGTL5000 before on the STm32F4 discobery and Riotboard. I've wanted to get a Teensy for...

Hi all. My partner and I are starting a project that involves playing audio samples from an SD card. Quite simply, we woiuld like to know, if we want to use the audio library (which is impressive to say the least!) do we need the audio adaptor board or can we get away with using just the Teensy...

Only stereo and the files will be 3 or so minutes of wav... The device has to be small as it will be being transported to New Zealand from the UK so I would like it all to fit in a nice box with buttons to select the sample being played and sensors on the box which the listener can affect by...

Hi all. I am new to this Forum so Hi from London (UK) :) I have a question regarding the Teensy and it's audio library which I was turned on to by Headroom at the Arduino Forum. I have an idea for a sound art exhibition I have been asked to contribute to that involves playing wav files of...

Hi all. I am new to this forum so HI.:D I am an audio systems undergraduate doing my final year at London Metropolitan UNI and have a final project to do. I want to build a synthesizer on an Arduino board using the Mozzi library which can be controlled by an Android tablet via bluetooth. I am...