Example Artnet/Sacn to WS2811 via Teensy 4.1 native Ethernet through QNEthernet?

freadZdead

New member
Hi there,

I have found bits and pieces for how individual parts of this puzzle work, but when trying to modify the existing OctoWS2811 example to use
QNEthernet.h (and comment out EthernetUdp.h, as apparently already included in QNEthernet) I am not even getting any link status on the Ethernet port...

I could not find a comprehensive example that uses the combination of:
- receiving Artnet or Sacn
- via the Teensy 4.1 native Ethernet Kit Port
- and outputs to WS2811

I would be very grateful for any hints/tips :).

Thank you so much in advance,

freadZdead
 
Back
Top