I am trying to send data to the Can bus over ethernet
things run fine for a while and the it craches
and I get this message from the Debug/print.h
vh Alex
things run fine for a while and the it craches
and I get this message from the Debug/print.h
Code:
need to switch to alternate clock during reconfigure of ARM PLL
USB PLL is running, so we can use 120 MHz
Freq: 12 MHz * 66 / 4 / 1
ARM PLL=80002064
ARM PLL needs reconfigure
ARM PLL=80002042
New Frequency: ARM=198000000, IPG=99000000
Decreasing voltage to 1150 mV
vh Alex