Sorry, I am distracted as I am trying to debug some of my own not related code.
Count of devices really only impacts as you mentioned amount of memory. And maybe in few cases where it walk the list of objects.
Probably. It is probably with the DNS that I am using. I think I still have it hard coded at my connection to my provider as something like: 1.1.1.1
Or might have been googles: 8.8.8.8
Was earlier having problems...
C:\Users\kurte>ping pjrc.com
Pinging pjrc.com with 32 bytes of data:
Reply from 162.254.150.250: bytes=32 time=506ms TTL=42
...
C:\Users\kurte>ping forum.pjrc.com
Pinging forum.pjrc.com with 32 bytes of data:...
That is the normal way the HID parser code works.
However there is a hook that some of the client code, like the RAWHID and for example some cases the Keyboard and maybe some others use.
That is, when the message...
Sorry, I was not doing much monitoring up here yesterday... Sort of off doing different things.
I have found with some of the Wireless Mice or keyboards, that yes, they can consume several objects.
For example,...
I am wondering if this display has a display driver chip on it or if it might be something like the KeDei display we were playing with a few years ago.
Which was another RPI 3.5" display, but it did not do standard SPI...
Is there anything that we should be looking for?
That is, was this a "simple" server change or was there other things that changed as well?
My guess is simple is never simple!
I noticed recently that you...
Note: I looked up at amazon, and they have a few Kingston Datatraveler G2 drives, but none look like the one in picture. So not sure if they would be apple to apple...
And if they are all different not sure worth...
Note: I am a software guy... But..
If you look at the T4.1 schematic it shows a voltage regulator that in main part says range up to 5.5v, but in the spec part it says absolute max 6v.
So you might be able to live...
Sorry, I know sometimes less is more...
If you look at the memory section of the T4.1 product page:
https://www.pjrc.com/store/teensy41.html#memory
everything except RAM1 (DTCM/ITCM) uses the cache.
The DTCM/ITCM...
Yes you should be able to do 8E1. Don't remember if you need to enable 9 bit support within HardwareSerail or not, probably not.
By default, the support for 9 and 10 bit and more is disabled within the source code...
Sorry, I missed seeing the DMAMEM on your example.
To me, the keyword DMAMEM translates to, almost the worst place to do DMA ;)
External memory can be worse :D
The issue: These areas of memory are configured to...
Paul has a github project to track issues about the website.
Did a quick look, and sure enough, I opened up an issue about this, about a year ago:
https://github.com/PaulStoffregen/Website_Updates/issues/26
Side comments to self:
Part of the write9 code that currently runs, I have wondered if it still fails at times:
while (tx_buffer_tail_ == head) {
int priority = nvic_execution_priority();
if (priority <=...
I was playing around with some different stuff, and ran into an interesting issue.
And I am trying to decide if it is worth fixing.
Here is some quick typed in code (probably has errors) that will likely hang a...
Sorry, I am not sure who the "maintainers" are?
The only person who can merge in any changes to this library is the Paul. @wwatson, who did most of the original MasStoreage work, has been very active on this...
In case anyone has not noticed:
Arduino released version 2.0.4. A few days ago.
I have not had any new issues with it, but have seen some reports up on Arduino forum, where some people have run into issues, like...
Couple of thoughts here:
I have had times where the crash is very near to startup code and kept in an endless beep reset, beep reset.
So sometimes I put code in like:
if (CrashReport) {
while (!Serial &&...
If you are going to muck with the register, I would do it right after you did any/all SPI.begin() (including SPI1 and/or SPI2...) as they all use the same underlying clock.
Note: the code was setup to try to avoid...
Note: The SPI library is setup to allow you to choose a different Clock setting for base of it.
It is all controlled by the clock register: CCM_CBCMR
Which the SPI library inits each time you call SPI.begin()...
You might try to use some built-in hardware support...
For Encoder: not sure if it is a quadrature encoder? if So you might want to look at:
https://github.com/mjs513/Teensy-4.x-Quad-Encoder-Library
For Analog...
Sorry, you may need to explain more about what you are doing or wanting to do.
For example you are sampling Analog. Are you using the analog capabilities of the Teensy to do this, or are you using some external ADC...
I am saying in particular the logical output flush (tcdrain) on the linux machine, mainly SBC like RPI, or UP, would stay in this function for an extended period of time.
So my setup code to talk to the Dynamixel...
Sorry, I am probably not much help here. But with USB latency, when talking with PC/RPI...
When I have worked on different simple robots in the past, where I used a Teensy or other board as a Servo controller and the...
Note: I posted the code I tried, plus output, that at least in the simple case the hardware and digitalWriteFast is working
And potentially if you have a logic analyzer or Oscilloscope, you maybe could try to see if...
I don't see that issue: Here is a complete sketch:
#define GATE_OUT_1 39
#define GATE_OUT_2 38
#define GATE_OUT_3 37
#define GATE_OUT_4 40
void setup() {
pinMode(GATE_OUT_1, OUTPUT);
pinMode(GATE_OUT_2,...
Sorry, other distractions.
Yes - if I remember correctly (year plus ago) - that github project was where I had done some rawhid host code to test the rawhid 512 stuff.
There is an Open PR on core:...
Sorry, I know off topic, probably should take to another thread, but:
Earlier I was playing with Two Teensy 4.x talking to each other using RAWHID, with the version I made that supports 512 byte transfer. But so far...
Thought I would mention, I was able to build it using W11 sort of using your guide. My first attempt using Visual code, the cmake stuff failed.
Started over and used the Command line. stuff and there I saw the...
Sorry have no idea if the sketch can or can not work on ESP32.... We don't see the actual sketch.
But the error:
C:\Users\Tom\Documents\Arduino\LEDmetronome\MetroD rumv1.19\MetroDrumv1.19.ino: In function 'void...
For what it is worth, @mjs513 and I were playing with a picture viewer sketch, which is up at: https://github.com/KurtE/mtp_tft_picture_view
It cycles through pictures on a storage and displays them on a display.
It...
Sorry I am not a platformerIO user, but your simple images/code do not show you including <SD.h>
You have some other <dbSD.h> which I don't know what that is.
It does show in your platform.ini file stuff that it...
Sorry, throwing darts...
How are these Teensy boards being powered? Is it through USB? Or through VIN? If VIN, what is the voltage?
Just wondering if it could be differences in which VR or the like...
Again...
The QSPI memory does not use LPSPI it instead uses: FLEXSPI controller (Chapter 27) - There are two of these, one for main memory and second for those bottom chips.
Pins 48-54 - Mode 8 If my quick look is correct.
...
@luni - I was thinking the same thing in my earlier post.
Maybe it is one interrupt interfering with the other.
...
inline void TriggerGenerator::PeriodicCallback()
...
prepare_message(type_, seconds_, micros_,...
LPSPI - I know somewhere in the PDFs, it says like LPSPI should not exceed something like 25 or was it 30mhz.
The QSPI is a setting on LPSPI so would have the same speeds. However, I am pretty sure that there are...
Maybe it is one interrupt interfering with the other.
That is, if you have code like this:
inline void TriggerGenerator::PeriodicCallback()
{
digitalWriteFast(pin_, HIGH);
// REVIEW: need no interrupt?
...
I would definitely go more by what Paul says here, but earlier I did query on Digikey and Mouser and found what looked like sevaral available.
In the last search I restricted my search to TQFP type as the other types...
So you added the json file to the preferences. That is if you bring up the preferences and click on the list yours should include:
Your list includes the one I highlighted in green:
Note: Just to be sure I often...
Like the others, I am pretty sure that is simply two connectors. that is there are 2 groups of 4 pins, which probably match the 4 pins of our one connector where then the 5th pin would connect up the shield...
If you...
I would double check the udev rule, as when I install teensyduino directly for Arduino IDE, on Ubuntu, I have to manually copy the file to the right location.
Edit, and I would also maybe see what the linux tells you...
Did you install the udev.rules on this machine?
https://www.pjrc.com/teensy/td_download.html
Maybe try different USB cable. Maybe it is a power only one?
Quick note: I personally try not to make any assumptions about the experience levels of different members up here, unless of course if they mention it. To me it is often more, a matter of what your current project is,...
Everything is a tradeoff... There used to be code in place, that would remember if the last output was 8 bit or 16 bit and if the next one is different it changes the setting. Which in isolation worked great.
...
Guessing that you used older compiler and maybe either did not see the warnings or maybe did not generate them.
Yes there are three of them:
void getTextBounds(const uint8_t *buffer, uint16_t len, int16_t x,...
Yes updating to new compiler that checks things more... can get you lots of warnings.
I did a quick look of the github source for the header file and the blame view says that the api changed 2 years ago.
Note some...
Note: The IDE already has the preferences settings for warning levels.
It is just that the Teensy install does not use them. Possible changes and the like mentioned over in the Arduino forum in the post:...
Assuming you are still trying to use SPI...
I could be wrong, but not sure the special transfer16, will gain you a whole lot. Maybe the save, set, restore eats some cycles, but as compared to the rest of the stuff...
...
Sorry, maybe I am missing something here...
But with this code, it looks like a lot of the classes are on the stack as part of setup?
So they disappear once setup completes?
What do you mean by not responding? Is...
Any time you pass or use a string like: "ABCD"
and pass it to somewhere as a char* if will give you this type of warning, as doing somghing like
const char*sz = "ABCD";
*sz = 'Z';
will fault the processor as you...
Yes, the other positive side effect with Mike's version, is we converted it to an archive library.
The benifit is, with the official version, if you include it, all of the fonts will be loaded into your sketch.
With...
The version of ILI9341_font library from @mjs513 is setup to work with most all of our graphic libraries.
The problem is that they depend on the font definition, which is not local to this, but instead part of each...
Is it possible for rawhid to do 512 byte transfers? Yes
I experimented with it over a year ago, and did do a Pull request: https://github.com/PaulStoffregen/cores/pull/629
Note: the PR has not been incorporated and...
Yes you can have IDE2 and IDE1 both installed on same machine.
Appimage on Ubuntu: Currently has a minor issue that a shared library is not installed by default on Ubuntu.
fixed by: sudo apt install libfuse2
...
Note: I believe there have been some other threads in the past about this.
Like: https://forum.pjrc.com/threads/64573-Exception-handling-on-Teensy
There are times it would be great, but not sure as a default as...
These can be challenging to find.
First thing I might try, if you have not already done so, is to put in the Crashreport code in and see if it captures a crash.
Something like:
while (!Serial && millis() <...
Good luck!
Sorry, I sort of stopped looking after I saw that it is not using the standard Serial Interrupt handler.
You probably still need to look at some of the RX states and clear them.
And/or wondering if...
Find latest posts