How can I check for that? I am using the hex file for m8 headless.
Is there a voltage I can read on the pins, to verify if everything is fine? If I flash the Teensy first with the audio demo, and then put the hex file for M8 headless it works...
Troubleshooting what happens when I power cycle the teensy 4.1 running M8 headless. I basically lose audio output as I power cycle the board. I hear no audio at all unless I re-flash the board. Then once I power cycle it again the audio does not...
Really amazing; and thanks for making this an open project. I think you should have a paypal or something like that because this project deserve donations for sure
So interesting enough, I found that it seems that something shut down the audio signal once you set the firmware once. I had audio working fine with the audio board and the demo sketches from Arduino IDE; and it worked when I flashed M8 tracker...
I am experimenting with M8 Tracker headless, and I started to use it on Windows, before moving to a RPI as host for the UI.
Problem is, I hear no audio. I connected a Teensy audio board, and it seems to emit a pitch when I play sounds from the...