mjs513
Senior Member+

Think the contrast is excellent for such a small display and the off-axis performance good as well - titled it about 80 deg (just a guess) and was still able to see the display clearly.

I pushed your updated version to the repository along with the tft_picture_viewer sketch you updated for the GC9A01 display.

@defragster - sorry just saw the post. Yes @KurtE incorporated those changes into his fork of the SD library. Not sure if its been incorporated into Paul's master SD yet?

Ok finally got a chance and downloaded your latest changes seems to be working as long as the cards are in the Builtin slot on Teensy start up. If its not and you insert a card it does recognize that you inserted the...

@MichaelMeissner Have no idea to be honest - been so long here as well since I played with those displays. Been busy with other stuff besides Teensy today :) EDIT: Oh by the way managed to implement rotating a...

@KurtE Gave it a quick test run - nothing extensive and mostly with a hub attached more of stress test on the add/remove feature. It does work: 1. Using my M2 drive inserted on boot up it recognizes and I can remove...

;) Cool can't wait to see what you come up.

Ok guys just implemented a Attitude Direction Indicator (ADI) using the new library with the additional feature of using transparent BMPs. Really experimental. Here is a short video of it in action: Enjoy

Evening Michael Sorry was kind of sidetracked today with trying to get transparent BMP working - think I kind of got it working. But yes should be transparent since we are working with same base display driver. As...

Used an approach that @KurtE used: #define SD_CS BUILTIN_SDCARD File imageFile; const char *name = nullptr; and in the body (setup in my case) imageFile = SD.open("Horizon_GroundSky.bmp", FILE_READ); name =...

Been experimenting after and during Kurt's post. The issue is definitely in MTP_Storage.h and use of the has_include. For instance (after some trial and error) I just did this: //#if defined(__has_include) &&...

Yep you are right was looking at wrong lib for some reason - should have mine tomorrow by tomorrow night

Its not throwing an error but giving a warning - I am seeing that periodically as well - you can safely ignore it. Honest know what it means but not sure why we are seeing it.

I just ordered a MAX31865 + cable and will give it a try. Looking at the Adafruit MAX31865 libaray though it looks like they are using SPI MODE1 not MODE0, i.e., spi_dev(spi_cs, 1000000, SPI_BITORDER_MSBFIRST,...

well, does kind of matter if you are using SD with the T4's. With the Teensy libraries the SD library is linked to the SDfat library and LittleFS and MTP are all integrated with the FS stuff for the Teensy. That;s...

@SteveSFX This looks a little strange to me. Looks like your sketch is using the SD library that is in your libraries folder. C:\Users\steve\Documents\Arduino\libraries\SD\src/SD.h You might want to check if you...

@EcodroneSRL The link kd5rxt-mark pointed to I believe gives you the answer to your question on whether you can use a SPI device on one of the QSPI slots. You would have your work cut out for you. However with...

Ok was playing a bit and think I found the solution for the exFAT formatting issue but it requires a minor change to the SD library: if (ret) { // TODO: Is begin() really necessary? Is a quicker way possible?...

@defragster - here is a snapshot of my flash after I ran the t option and it failed because disk was full. NOTE the many sub directories that were created: kind of shows that LFS can create sub-directories. Yes I...

Not sure that statement is correct that QSPI Flash can only write 2 dir deep. I just ran your updated test sketch using the 't' command and you can see clearly it created the several levels of directories until the...

@KurtE - @defragster Just tried coping those 1656 files from SD1 to SD2 using mtp_test_integrity 3 different ways - ExtMem, PrgMem and MemFile for where the index file is located. All three ways failed to copy...

@defragster - ok you answered my question as I was typing it Total 1656 files of Size 14497750 Bytes Verify Errors 0 2492.506248 msec Bytes Used: 67928064, Bytes Total:31902400512 ---- Task 'v' complete! ---- ...

Ok that worked ================================ Media Size=31902400512 Used Size=20086784 us=1078072 KB/sec=3623.37 Bytes written=4000000 MakeData done. ---- Task 't' complete! ---- D0.20 / ...

@defragster I am using a 32GB SD Card in SDIO and without using you LFS option. And yes I am using Test Files write 2206 option I downloaded your latest version and got this error about writing files to the disk...

Using my mtp_test_integrity sketch and using an index file in program mem I first ran you makeFiles using the 't' option and verified the files on the Builtin_sd card. I then copied them to "SD1" and then from "SD1"...

Was poking around the issue and noticed you referenced https://github.com/arduino/arduino-ide/pull/893 which has been closed but if you scan through all the comments I noticed this: but not sure it related to the...

Just checked on Windows and does the same thing as you showed

Just checked on the Pi4 as well and only one port gets enumerated as opposed to the 2 in Windows for the Teensy 4.1 Sketch is a bit different but same idea. Its reading a GPIO pin on the PI4 and telling me data is...

Well they copied from the PC to the flash. I did verify that they were on the flash via MTP of course. Yet they did not copy down from the flash to PC - not sure why when everything else did.

Yep should be DID NOT transfer - typed it too fast Probably formatting would be good. Of course makefiles is useful. In comes in handy for certain testing.

Using @defragster MakeFiles sketch running the 't' and 'b' options it created 1,151 Files in 49 Folders on the Builtin SDCard. I copied the files from SD Card to the PC using MTP and then copied the files to the...

@PaulStoffregen - @KurtE - @TeensyDigital Using Arduino IDE 1.8.19 and TD1.57beta3 I switched back to using the smaller blocksizes that we originally had in LittleFS (4096 versus 32/64K) and reran the sketch in post...

I noticed that as well this morning as well when I switched from the PI4 to windows to receive data using the PC. I don't remember having that issue with the PI though.

@PaulStoffregen Think I got it isolated. Using 1.8.15 + TD155 plus the following changes to LittleFS Libary Updated LFS library to 0x00020004 Updated the LittleFS for change blocksize and blockerase (equivalent to...

Understood - going to see how much I can isolate it down without breaking things :) As you said you have enough on your plate

I installed Aduino 1.55 and TD1.55 (closest I could get) and verified that the LittlFS had the smaller block sizes and earlier revision of LittleFS (0x00020002) running the sketch #1 with 1 minor change: ...

Yes we did but when we tested the changes we didn't see much difference. I am still going to do some more testing because I am now curious.

Yes there were some changes, was kind of a tradeoff process. The main thing was that the blocksizes increased which means you are going to get a performance hit for small files (less than a block). Blokc sizes are now...

Still have a few things on the plate before getting into ext4. Since I get so focused on an issue I can't let it go until I get it working. Sure no one else is that way :)

Just a note I have been using EaseUS Partition Master which formats for ext3 and ext4. There is a free version although not sure what limitations there is:...

Installing on windows now. First update of Arduino 2rc7: the board manager shows that 1.56.1 is installed and shows the dropdown for the new install version of 1.56.53???? Any reason for the 53 vs 3 - not an...

Good Morning all Finally got the PI4 updated and operational last night or rather early this morning and started playing with IDE2.0. The PI4 is running Ubuntu-MATE-20.04 to start and the desktop is fairly windows...

Quick update did verify the CardInfo SD sketch compiled and used the correct version of the SD Library: Multiple libraries were found for "SD.h" Used:...

@KurtE Thanks - copy and paste error with the link for teensy so nothing was loading. Deleted the incorrect one and put in correct link and now all is working again - whhat a PIA - think in old one if link was bad it...

Just ran into an interesting problem when doing a clean install of ide2.0 on the PI4. Got to run the rx7 for the pi4 but then gett this error so seems can not the boards (any of them) will try again later.

Very cool, Found my issue with talking to the Teensy - was all the PI4 side so in process of reinstalling and configuring it now, so good timing

Thats a good place to start definitely - guess at some point have to incoporate into MTP :) @defragster - yep. I could only find apps to read/copy ext4 files but not write

Very cool - now another thing to try out :) vERY C

Well since I have been absorbed with the PI4 lately I gave the hack a try and looks like it works: Using library SD at version 2.0.0 in folder: /home/merlin/.arduino15/packages/teensy/hardware/avr/1.56.1/libraries/SD ...

@wwatson Thats great news - could definitely use something like that now I am using a PI4 - especially for recovery purposes

@KurtE Had to redo a bunch of reinstalls on the PI4 and wasted time with the M2 memory drive on the PI4 so .. Just finished reinstalling IDE 2 on the PI4 using the appimage route and installed the Teensy boards...

I have been using the sparkfun version of the ICM20948 but have been using the adafruit library. Here are the instructions for both: https://learn.adafruit.com/adafruit-tdk-invensense-icm-20948-9-dof-imu/arduino ...

When I did a search for Arduino 2.0 language server - all it was referencing was how to change the language for the IDE. Didn't find anything on the rules for setting up the hover. However poking around found that...

Repeated on Windows 10 and sure enough same issue

As of 6:21EST it has been released just updating now. Seems to be working nicely - alot better than prior releases: NOTE Compile errors are due to not having beta2 installed. Left it at 1.56.1 intentionally

Yep that was the problem - can't use pin 7 with audio shield.

Good Morning all Just reinstalled 1.56.1 for arduino 2.0 and copied the new core-jar file to 1.8.19. Did a quick test using on the MTP sketches I have been playing and looks like its working - NO MORE PAIN. ...

Didn't see the normal garbage at using the IDE serial monitor but did see alot of it when I tried using TyCommander but then I was also seeing speeds of up to 950K/sec and higher (again that was with Tycommander) after...

Ok couldn't resist. Install 2.0-rc6-snapshot and after installing 1.56 from the boards manager I updated core/library and boards.txt files to 1.57-beta2 (copy and paste and ran the speed test. It looks like it may be...

Would be nice to get a beta2 installer at least this one time for testing both the beta2 and the ide changes. Playing on running on a Windows10x64

Running into another problem - cant seem to play anything from littlefs

@wwatson Playing some more with the sketch and rewickered setup and the mixer connections per @h4yn0nnym0u5e suggestion so now can now play .raw files as well. Did reset everything up and it is working. #include...

Sorry for the delay in my response - been distracted with MTP again (my sketch now working again ). Glad its working again.

Yeah the dummy that I am I forgot. getMediaName is whats in the core - duh. Anyway the conflict seems to be that when I print the media name for NANDS and then MSC it seems to be crashing right the first print for...

FYI - This is the line that is causing the issues: //DBGSerial.println(getFSPN(ii)); Did we loose getFSPN?

As a followup to my post on MTP issues looks like the problem is isolated to getting and printing the storage list: case '1': // first dump list of storages: fsCount = MTP.getFilesystemCount(); ...

You can probably delete this as well as LittleFS is installed with Teensyduino

Install on Windows Home x64 went smoothly no blue screens about security which is good. Started to do some testing with updates to USBHost_t36. Did notice UsbMscFat was not included in Beta2 - maybe for Beta3. ...

@wwatson and anyone who wants to check this. I rewickered the constructors and setup for the PLAYALL_SD_ONLY.ino example. Not sure what to do with Raw since the mixers only take 4 inputs. #include <Audio.h>...

@KurtE Just did a quick test of some of the USB Types I was having issues with your latest set of changes and your sketch in post #108 and they all seem to working for me now. It looks like all the output_i2s...

Since I had no idea of the rule or why since I don't normally play with the Audio library I am curious about the construct in post #1. Guess its a question. If I am only playing 1 output type (Wav, MP3, FLAC, etc)...

@KurtE Should have posted the code. First - should have been post #93 not #85: #include <Audio.h> #include <Wire.h> #include <SPI.h> #include <SD.h> #include <SerialFlash.h> // GUItool: begin automatically...

Doing some more testing this morning with the sketch from post #85 Base Case: Raw_Hid OK Dual_Serial OK Serial+MIDIx16 Fail Serial+MIDIx16+Audio OK Audio Fail ...

Wondering to self. If these warnings are causing the issues: F:\arduino-1.8.19\hardware\teensy\avr\libraries\Audio\output_pwm.cpp: In static member function 'static void AudioOutputPWM::isr()':...

Assuming you mean USB Type: Audio? I am getting sound from my speaker with using audio by itself as a USB Type. Not testing with a scope - using a simple a speaker attached to the PT8211 board per the picture. When...

Thanks. I am not an audiophile so out of my realm here but I just did another test: If I go back to the sketch in Post #29: #include <Audio.h> #include <Wire.h> #include <SPI.h> #include <SD.h> #include...

Just soldered up a PT8211 (T3.x version) wired to a T4.0 and the sketches in post #35 (@Paul) and post #85 (@TheHermit) both are working with the FLASHMEM commented out as mentioned earlier using TD1.57-beta1. USB...

Yep - should be 85 - good catch and good eye :) Will fix

@mattjowil I can try to answer your questions but may be confusing: Its a restriction based on the IMXRT1060 itself. The Encoder module is dependent on using XBAR (See figure 56-1) to access the physical pins on...

Thanks Paul - really curious as well.... really have no idea. Unless it has something to do with using DMA from flashmem? Just guessing here.

@PaulStoffregen - @KurtE - @TheHermit and all interested @KurtE and I was playing a bit more this morning with this issue. The one thing that I noticed between output_pt2811.cpp and ouput_pt2811_2.cpp was that...

Yep its down - Paul mentioned that in another thread and last I heard he was working on it. He didn't mention when it would be up again.

You might want to check out @tonton81's new SPISlave library: https://forum.pjrc.com/threads/66389-SPISlave_T4?highlight=t4.1+spi+slave Seems to fix all the issues I was seeing here.

Depending on your camera you may have to change the byte order to little endian = defined here: bb.order(ByteOrder.BIG_ENDIAN); EDIT: you might want to check this out: ...

Ditto here - was getting a bit frustrated. DELETED ORIGINAL UPDATE: Was getting really frustrated so glad you got it working. Anyway, made the same changes to FTP_Server_T41 and configured a new site in...

Started with SimpleFTPServer and seemed to work with files up to about 6MB but then looked at your code changes to doStore and since I can not leave well enough alone changed this // This my hack. uint32_t tmout =...

Thanks for the info. Kind of figure the availableforwrite just now when I was looking at the ESP8266 core. But I have been working on this so long I need a break - about ready to give up.

@wwatson Just a followup to my previous post - did some more testing and seems like uploading files >500K fail for the most part. Havent found the issue yet

@wwatson - @khoih-prog Think I got doStore working with the following changes - this is with SimpleFTPServer if you can give it a try and let me know if it works for you. bool FtpServer::doStore() { if( !...