Ah, ok
I need to check my code because the shift registers that drive the led do not keep the LED lid but only make a very brief (almost invisible) pulse.
@a_guy_called_tom
in your github i see that you use the delay function for the step's leds..
but this introduce a latency? is not better with millis()?
I ask you because i have the same problem, i have 2 shift...
i have a ssd1306 display on the wire2 bus (3/4 on teensy 3.6), it require i2c_t3
if i use the example advanced_Scanner for i2c_t3, i see that the address of the display is 03XC
from what I understand, however, to...
Hi, i'm in trouble with a project
i need to use the wire2 (for the pin 3 and 4 and it works with the scanner) to communicate with my display, but the u8g2 library need wire or something else ...
I'm sure it's a...
Hello everyone,
I'm Francesco from Faselunare, we are a small group of makers from Italy, our first project is an Open Source Drum Machine named "Shapeshifter"
Our goal is to create a community around Shapeshifter...
Hi, there is a convention for the pcb versioning?
for example
i have a first hardware realease
in the second release i add a capacitor and a switch and minor changes on the silkscreen
is correct something like
...
Hello everyone!
I need help to select the right license for my project.
We have a public Gitlab account
We want to share schematics, BOM, silkscreen plan
We want to share firmware source
We want to create a...
Hello, at Faselunare (www.faselunare.com) we are working on a DIY open source Drum Machine based on Teensy 3.6.
It was inspired by this project and modified to be easily assembled by anyone. 1 button and 1 pot have...
Find latest posts