I have a Teensy 3.2 working as a Gamepad and I am getting a joystick and multiple button states coming in so that is all working fine. I would like to light an LED that is wired to the teensy, but per my control...
(Thought I posted this before, but can't see any indication it's on the forum).
Need some suggestions on how to go about the following:
I have a working 20ms ISR, and I need to start a timer that will count up to...
/*
Processing sketch to run with this example
=====================================================
// Processing UDP example to send and receive string data from Arduino
// press any key to send the "Hello...
I can change the IP address of my Teensy 3.2 using the following code.
IPAddress ip(192,168,1,234);
void ipchange(ipaddr newval)
{
IPAddress new_ip(newval.addr0, newval.addr1, newval.addr2, newval.addr3);
...
I posted on another thread, but I am also having a freeze that I can reproduce very easily.
I have modified SendReceiveString very slightly and if I run this program and then use a simple program like SocketTest to...
I have code that runs on a Teensy 3.2 with Wiznet via SPI and wanted to run the exact same thing on a Teensy 4.1 with the mag jack.
The Udp Data I am sending is a structure complete with 0s, so I have to use...
Find latest posts