I used the spectra-symbol softpots, they have lengths of up to 1000mm, but I used 500mm. This makes for a somewhat "short scale" bass with a scale of 666mmm, but I like it. Also the 500mm pots are considerably cheaper and easier to get then the...
hi there,
this might be pretty basic, but every search points me to the audio library which I think is not the way to go here (but maybe it still is)
I want to read an analog signal on a teensy 4.1 which has no audio shield and most pins...
and I spoke to soon!
It works fine as long as only 4 midi devices and the mouse are connected, as soon as I connect 5 midi devices and the mouse, it does not work anymore, the mouse does not send any values out... here is again the code (working...
thanks for your answer. the solution was much more simple...
I had the mouse1.mouseDataClear(); statement in my function before doing anything with the values, which resulted in no changing values of course... accidentally I had the DataClear...
hi, I am trying to connect several midi-devices and a mouse (hid) to the same hub and interact with all of them via USBHost on a teensy 4.1
If I upload just the mouse code, the mouse works. If I upload just the midi code the midi devices work...
ok, if I upload the mouse sketch from the USBhost examples, the frame acts just like a mouse, spitting out x and y values, again obviously no multitouch. I guess I will have to enable multitouch output by sending some specific USB-packets to the...
I have connected a USB infrared touch frame to the host port on a teensy 4.1 and I am running the HIDDeviceInfo Sketch to gather some info, below is the Serial output from the startup and then a finger and later two fingers moving in the frame...