I have an existing Teensy 3.2 based project that has been regularly updated over the past couple years to add an ever increasing list of features/capabilities. The constant stream of updates have steadily increased the...
I'm going to assume you've already worked out the analog circuitry for handing your piezo signals (amplification, impedance) and that you're simply working on capturing and "replaying" incoming signals to help on the...
I believe you need to be looking for a list of PID's, preferably make/model specific. These serve to identify the different values and sensor readings accessible thru the CANBUS. Some of these are fairly...
I suspect the market for 3.X will still be strong for both new designs and existing/legacy products. The 3.2/3.5 are particularly well suited to certain applications (analog heavy, 5V tolerance, etc) that can make...
From my experience you CAN damage other on-board components when applying excess voltage to a Teensy GPIO when the voltage is large enough (~9-10V+), the circuit path to the pin does not have an inline resistor to limit...
Find latest posts