In February 2021, I ordered a DISPLAY_ILI9341_TOUCH and designed a PCB for my project around that. Now I would like to buy a few more, but I see that that part number has been replaced by the DISPLAY_ILI9341_TOUCH_28...
You're correct about the jitter being negligible for a 1Hz clock rate. I neglected to say that I want to be able to change the clock anywhere between 1Hz and about 1kHz, or maybe a bit higher. I could use an interrupt...
Edward, I don't want to use an interrupt for the PWM because I need it to be very precise and don't want interrupt latency to cause phase shift or jitter. I may use that technique for other things though. Thanks for the...
I would like to have a very slow PWM (1Hz - 2Hz) on the Teensy 4.0 and from my reading of the i.MX RT1060 Processor Reference Manual, I believe that I will need to source the PWM with an EXT_CLK, because the IPBus Clock...
Find latest posts