Thanks KurtE.. yes 5206 .. I just couldn't figure out how to redirect to the alternate wire1..and I was goigling and checking out sumotoy 5206 but couldn't find a reference to switching to an alternate ..Ill give it a...
I have the above working fine , no issues , but could use some schooling on an aspect of i2c .. Im currently using the wire library default and my i2c is running on pins 18/19 on the t4 for the touch screen ..if I...
That's what I thought as well .. and there is a history of that with this display ..
BUT I can't figure out why the one that doesn't tri-state correctly on pin 8 can function properly when I move the CS line to pin 3...
Okay .. this is just an observation of which I'm totally puzzled . I purchased 2 X ili9488 from the same vendor ... both displays work fine . I did have to drop the MISO line off the display portion in order to make the...
Good Idea on the SMD sample kit I was not thinking of that .. I'm good on what has to be done .. I have other buy display screens that are SPI now so familiar with 4 wire setup on my teensy 4.0 and 4.1 . Just i didn't...
Yes ..thats the panel , sorry I should have posted up the model I ..I need 3 x 10k for r1/r2/r3 on the top left of the board ..I just don't know the component size 1206/0805 ?
I received the above display in the title ..but missed the proper configuration ..though it came configured for spi ,but jumpers are set up for 8080....I can re-do the jumpers , but there is a requirement for 3 x 10k...
Disregard my post .. I had a conventional FFT running off a mixer and the second taking I/2 from a different source ... I thought about what you said .. walked away from it and fixed it .. thanks for the push!
Just a quick question ..
I'm running a teensy 4.0 and rev "d" audio shield .. no issues
I can generate the I/Q requirements and the the FFT Display works fine ... But I can only drive it via the audio Input (i2s)...
Hi Derek .. Just a thank-you for putting this library together .. I have a builders group on facebook for simple SDRs .. (starting projects) and your library is getting used by some of the members (myself included)...
Find latest posts