Hello everyone,
my research is really struggling to progress due to lack of skills on my part!
(I read a lot on this forum and on Google)
I still managed to connect a W25Q64JVSSIM flash chip to my Teensy 4.0 board. I will order a W25N01GVSFIG...
Hello, after updating the Arduino 2.3.2 IDE as well as Tennsyduino 1.59.0, test the MTP_Tennsy library with the Example_1_MTP_Little.ino script, my Tennsy4.0 card is clearly visible and I now see the Progdisk and the sflash ( for mine 8MB)...
Good morning,
I saw this post talking about it,
https://forum.pjrc.com/index.php?threads/how-to-put-a-file-to-extern-flash.74183/#post-336346
but it's not very clear for my skill level
Hello everyone, after a number of tests, thanks to your help I managed to connect my flash chip.
now, could you tell me the methodology of what I can do to load a HEX array into my chip?
Tennsy 4.0
flash: W25Q64JVSSIM TR (mouser)
thank you all...
Good morning,
I thought about my file size problem.
If instead of putting a file in hex in PROGMEM, can you put it in Byte? style:
const uint16_t image[ ] PROGMEM = {
B11111111,
B11011000,
B11111111,
..........} ;
The same file would be much...
Hello
KurtE
, the goal is to simulate a kind of GPS (random animation of movement) so a large image where I just take the part which is in the area of the size of the screen.
the image format is obviously not recognized as compliant. (it could be...
Good morning KurtE,
I'm on Tennsy 4.0, I tried on an SD card (on the screen) but the image is too big and the test script doesn't work, the card is recognized but not the photo, the script I use to test it is that of ILI9341_t3 spitftbitmap
Hello everyone,
I use a Tennsy4.0 card and a 320*480 TFT screen, everything works well thanks to your help.
what I would like to know if by adding W25Q64 to my montage I can put a photo of 2000*2000 pixels (the photo is 3MB), the script that I...
Hello, with the ILI9488_t3 library and a 3.5 320X480 pixel screen, is it possible to refresh part of the screen normally and another part with buffering in order to have a faster display
Do you also have any commented code examples so I can...
hello, I don't know why but it works now,
I had to plug in several pines
but not include them in the script....
I will be able to move forward with my project thank you all
I connected
RST 9
DC 8
CS10
MOSI 11
MISO 12
SCK 13
and in the test...
Bonjour,
Mark J Culross
KD5RXT
, j'ai changé le port série ici :
mais toujours pas d'affichage
:: début 20000fa4 255 255 255
ILI9488_t3 :: début - Fin
Test ILI9488 !
Mode d'alimentation d'affichage : 0x0
Mode MADCTL : 0x0
Format de pixels : 0x0...
Salut Paul,
pour :Dans l'IDE Arduino, cliquez sur Fichier > Exemples > ILI9488_t3 > graphiquestest9488.
mais rien n'apparaît à l'écran
:: début 20000fa4 255 255 255
ILI9488_t3 :: début - Fin
Test ILI9488 !
Mode d'alimentation d'affichage : 0x0...
here is what the serial wrote to me with the library of Kurts_ILI9488_t3n_and_clip_tests:
Begin: CS:10, DC:8RST: 9
Size of RAFB: 2
::begin 2000398c 255 255 255
ILI9488_t3::begin - End
Display Power Mode: 0x0
MADCTL Mode: 0x0
Pixel Format: 0x0...
Hello everyone, I have been trying for several days to get this screen to work with the Tennsy 4.0 but nothing works. I probably have to get mixed up in the connections, could you help me...