Are you sure the caracteristics of "greeting.wav" or "greeting.mp3" : fit the player to be played correctly?
Also,some mp3 players don't like too high bitrate and generate what you call
"choppy, robotic and slow-sounding audio playback"
if...
Hi, i,ve just done a 1.59 install with the EXE file :
https://www.pjrc.com/teensy/td_159/TeensyduinoInstall.exe
but i noticed the libraries haven't been updated,i erased them all
and did a new install of 1.59,then they did get updated!
Hello everybody,
i got this board,works like a charm,and i want to rely it with a pcb that have a teensy 4.1,
like a sandwich plugged into the "audio interfaces female pin header" of the CS42448 board.
But the distance separation of the pins is...
Hello Marimoose,
I had some issues too when i began learning with teensy,about the sd card wav player
the monitor said the song was playing but no sound was heared,all the examples were written with
the names in upper cases,then i tried with...
Ok i solved it,somewhere i've seen on this forum that somebody had a trouble like me
and he changed the MISO & CS pins,chance for me to have looked at this,Big Thanks to this person :)
so i change the Sd Card settings:
Serial.print("Initializing...
Hi MarkT,you're right i did not give enough infos,here's the sketch where i have 1 stereo input for my ipod
and the other outputs for the sd card:
#include <Audio.h>
#include <Wire.h>
#include <SPI.h>
#include <SD.h>
#include <SerialFlash.h>
//...
It seems there were issues with TDM and sd card spi pins with the builtin sdcard of teensy 4.1,so i wired an external sd card on SPI1
and using sdfat settings:
bool ok;
const int chipSelect = 0;
// Different SPI port (Teensy 4.1 SPI1 is...
Hi ,everybody,
My goal is to make my teensy stuff hearable via bluetooth,and build a little ESP32-Bluetooth HAT i will plug upon my teensy, :cool:
The esp32 bluetooth sketch works well,the teensy sdcard playing works well too,but the sound goes...
@KurtE
It's not rusty,it works very well,very handy tool ! :)
What is the procedure when you want to deal with differents modules with differents addresses on the same wire?
Wire1.beginTransmisstion(0x38);
Wire1.endTransmisstion(0x38)...