Teensy MicroMod Midi Circuit

isaacjacobson

Well-known member
Just a quick (and probably dumb) question: Is the circuit from this webpage suitable for Teensy MicroMod?

Also, would anything need to be added for static protection?

Thanks!
 
Most commercial (Din) Midi gear that I've explored have pretty much the same circuit as in the above post. Some have some series L and some bypass C.
If you are thinking of 1/8 inch TRS plugs/sockets then some extra protection is generally added in case of a patchbay mishap with Eurorack or other gear.
Otherwise the linked schematic for a 3.3v board should be fine with MicroMod,
 
Thanks a ton for the quick reply and confirmation. That makes a lot of sense.

If you are thinking of 1/8 inch TRS plugs/sockets then some extra protection is generally added in case of a patchbay mishap with Eurorack or other gear.
,

I actually am planning on using 1/8" TRS plugs/sockets. Any idea what should be added where to the circuit to protect it better?
 
Back
Top