Search:

Thanks Ben just what i needed

Thanks for the quick reply, you are always on top of things. I would definitely be connecting via the Vin, sorry i didn't make that clear. Thanks for the reminder on the USB. Running just off of 3.3v...

Trying to run a project off of 3.7v instead of 7.4v to save space any advice on picking the right converter w/ regards to current output?

Running:
teensy 3.6
PWN for more 4 or more led's...

Thanks for the reply!
What program do you use if you don't mind me asking?
Been trying to decide if I want to use eagle or if there is a better open source or free software out there that would be...

I have been trying to find library files for the prop shield for more than a week. Can't locate it. I am in the process of crating a board for it and would love to have it as a component for my eagle...

Thanks for the replies guys :)
@MichaelMeissner I actually have a 3.2 I started out with that chip and had wires soldered to the underside to get enough i/o. I was previously using a cut down audio...

Soo I am after taking time away from my lightsaber project I am back at it but redesigning it from the ground up including trying to make it much more compact. Starting with using the teensy 3.6, the...

yep you did

https://people.xiph.org/~xiphmont/thinkpad/PT4115E.pdf
Yeah i got the name wrong it was exposed pad, read into a bit more and it looks just like what you said, just got confused if it was a bare...

Sent you a PM headroom

Good thing to think about, the whole thing is gonna be encased in about 1/2 to 3/4 in aluminum outside of the heatsink so i am hoping that might help some. I wonder if there is anything else that i...

Looking at the data sheet is that straight up swappable? One pin assignment looks like maybe it could be, but i'm unsure what that open pad is on the 2 pin side. I don't really have the expertise to...

What i was meaning as far as using the accent rgb's is for the programming part until i get the battery pack up and running. The code shouldn't be too different for color change and effects so then i...

The LED star has essentially a 4ch version the pico buck on sparkfun and protfusion https://www.sparkfun.com/products/11850
set to run 1A instead of 350ma per channel. It is wired directly to the...

The RGB led's will be lighting a crystal chamber through quartz crystals on top and bottom. So no need for more than 10 to 20 ma just need to see how bright i want it. I had checked out the res...

The current state of my wiring diagram on a lightsaber project i am doing.

5532

Things to note:
1. I have the 2nd mom switch set to have the led on only when i am pressing the button, not sure...

Thanks for the info! looking into it as we speak, Gonna do some more reading on the audio and see if i can't narrow down my issues there before coming back for more info. Power is more important atm...

Oooh also if i am not using pin#22 or #23 for the I2S does that mean i could use them as pwm for the audio or would that be a conflict or confusing to the adaptor. Says if i connect all 3 clocks it...

Yeah deep end is about right :)
As far as break down that is definitely my plan as far as coding is concerned.
Power wise on the 5v regulator i have mostly only seen 5v 1A or 5v 1.5A max. Are...

So i am doing a lightsaber using the teensy 3.2 as a main board (https://trello.com/b/1MbM08rb/long-hilt-teensy-lightsaber-project) Already purchased the 3.2 and the audio adapter board. Jumping...