Forum Rule: Always post complete source code & details to reproduce any issue!

Search:

Type: Posts; User: dlm080

Search: Search took 0.00 seconds.

  1. I just commented out the systick_isr and...

    I just commented out the systick_isr and pendablesrvreq_isr functions in arduino-1.8.9/hardware/teensy/avr/cores/teensy3/EventResponder.cpp, so the ones from freeRTOS would be used instead.
  2. 1761717618

    1761717618
  3. I used the host interface on one and plugged in...

    I used the host interface on one and plugged in unmodified portion of the cable to the device interface of the other. I tried to attach a picture but the uploading of attachments keeps failing for...
  4. I cut a USB cable and soldered the wires to a...

    I cut a USB cable and soldered the wires to a header and connected it to the USB host connections on the board.
  5. I used the Serial Test example and was able to...

    I used the Serial Test example and was able to get the communication to work.
  6. Connecting two teensy boards using the USB host interface

    I want to connect two Teensy boards together using the USB host interfaces (one as the host and the other as the device), and send data back and forth. Eventually I want to perform streaming...
  7. So I fixed the multiple definition errors and it...

    So I fixed the multiple definition errors and it works. The warning just threw me off. Thanks.
  8. So maybe this warning isn't an issue, and I just...

    So maybe this warning isn't an issue, and I just need to resolve the multiple definition errors.
  9. FreeRTOS compile error saying Teensy 3.5 board is AVR architecture

    I'm trying to compile a sketch using FreeRTOS for the first time on my Teensy 3.5 board. I'm getting a compile error saying my board runs on AVR architecture (see error message below). I believe I...
Results 1 to 9 of 9