Forum Rule: Always post complete source code & details to reproduce any issue!

Search:

Type: Posts; User: Naru

Search: Search took 0.00 seconds.

  1. I fed the boards directly from my PC via USB...

    I fed the boards directly from my PC via USB cables, which is a different source of power than where the leds gets powered from. I will try and power them from the same source and will check the...
  2. It didn't go as planned unfortunately. Teensy was...

    It didn't go as planned unfortunately. Teensy was very unstable, it would randomly give timeouts, high latency, and at some point I had reply but it just wouldn't receive data from xLights ( the LED...
  3. Didn't know there was a "Output to Lights"...

    Didn't know there was a "Output to Lights" button..it is working now , and just figured that I was using the 2nd octo port, thats why it was seeing it as the 17-18th universe.

    I have learned a...
  4. Yep..channels were incorrect,the Test runs the...

    Yep..channels were incorrect,the Test runs the light, meaning it's receiving data. Trying to figure out now why my animantion isn't working.

    When running the test, I can see my 300 pixels (the...
  5. Can you take a look at my configuration please?...

    Can you take a look at my configuration please? No pixels are on, i am currently at home where I am trying to test with one strip of 300 pixels.

    189951899618997

    I tried creating just a single...
  6. I haven't done any zigzag, there's around 650...

    I haven't done any zigzag, there's around 650 pixels per octo pin , im not very sure as i've done a lot of modifications to my strips last night, so not very sure with how many I ended up with, but...
  7. Ill try that..should I just stick with e1.31...

    Ill try that..should I just stick with e1.31 since it's already configured like that for the sake of simplicity, since I am very limited on time? Will it support all my leds?

    Looks like it...
  8. It seems I was missing the GND + 3.3v pin. Silly...

    It seems I was missing the GND + 3.3v pin. Silly me I thought you can connect it only with 4 pins. The chip is W5500 btw.

    Gonna try Arnet now and make it work with xLights.

    Thanks!
  9. Hi crees..im using teensy 3.2

    Hi crees..im using teensy 3.2
  10. Recieved the modules but cant get them working....

    Recieved the modules but cant get them working. Most likely I have missunderstood the pins as the module doesnt even blink the leds.

    Here's how I connected them together:
    18993

    I have tried...
  11. Thanks, i'll give them both a try when I get my...

    Thanks, i'll give them both a try when I get my modules.

    In the mean time, did I made a mistake by not ordering the wiz adaptor (for 850chip)? There's no clear instructions how to assemble the...
  12. Replies
    1
    Views
    190

    I just found this thread which is 3 years old,...

    I just found this thread which is 3 years old, but was wondering if this still holds true: https://forum.pjrc.com/threads/26016-OctoWS2811-Adaptor-Audio-Adaptor-Board

    It says I have to de-solder a...
  13. Replies
    1
    Views
    190

    Teensy 3.2 Art-NET with Audio Adaptor

    Hi guys,

    I am working on a project that involves controlling 10x Rows of ws2812b , 12meter each ( 120M total = 7200 Pixels ) ( more on the initial setup:...
  14. Thanks a lot crees, thats a lot of useful...

    Thanks a lot crees, thats a lot of useful information, i will take my chances and wait for the modules.

    What sketch do you use? Im looking to make it work with Vixen probably as it seems its easy...
  15. Looking at the megapixel one socket link, Teensy...

    Looking at the megapixel one socket link, Teensy 3.2 has been tested with w5200. If I look at the wiznet website, they list WIZ820io ( which is based on w5200 ) as not recommended, and they have...
  16. That is really interesting and I think it should...

    That is really interesting and I think it should solve most of my problems! However I have to find a temporary solution via USB-serial, basically just for the opening night then I can continue with...
  17. Hi Paul, That's why I have 3x Teensy 3.2. My...

    Hi Paul,

    That's why I have 3x Teensy 3.2. My idea is the 1st Teensy should control the top half ( 3200 Pixels ) and the other teensy the other half. I can of course use my 3rd teensy as well and...
  18. Teensy 3.2 + OctoWS2811 (7200 Pixels) Strip animating ideas

    Hello all,

    Im working on a Fitness room project, where my main inspiration was taken from Madrix 5 solutions, see example:
    https://www.youtube.com/watch?v=Fd7t9hcqLgA

    After a lot of research...
Results 1 to 18 of 18