Forum Rule: Always post complete source code & details to reproduce any issue!

Search:

Type: Posts; User: Juraj

Search: Search took 0.00 seconds.

  1. 1500 is a size of a TCP packet. it is normal that...

    1500 is a size of a TCP packet. it is normal that available() returns 0 between packets, even it shouldn't be so slow that only one packet is available at time.
  2. if server.accept() works for you, consider to add...

    if server.accept() works for you, consider to add a supporting comment to the PR in WiFiNINA GitHub repo:
    https://github.com/arduino-libraries/WiFiNINA/pull/204
  3. so now you have to build the patched nina-fw. it...

    so now you have to build the patched nina-fw. it is not easy.
    first make the build work. https://github.com/adafruit/nina-fw#building
    then add code from my PR...
  4. yes. that starts the 'flashing mode' what is...

    yes. that starts the 'flashing mode'

    what is the source of the bin? I think AirLift requires a specialized build
  5. so you use the SerialPassthrough sketch? do you...

    so you use the SerialPassthrough sketch? do you use the basic SerialPassthrough sketch or the SerialNINAPassthrough sketch?
    I guess the AriLift shield doesn't fit on a Teensy so you connected them...
  6. does esptool.py read_mac work?

    does

    esptool.py read_mac
    work?
  7. I wonder why do you have problems to flash the...

    I wonder why do you have problems to flash the AirLift? The shield needs to put a solder blob on the bridges at io 0 and RX/TX, but then with io 0 wired to ground the esp32 should go into flashing...
  8. the esp32 is updated only over Serrial0 pins. so...

    the esp32 is updated only over Serrial0 pins. so RX/TX connection is required. io 0 LOW at boot signals to bootloader the it should wait for upload. the board has pull-up on io 0 for normal boot to...
  9. NinaSerial has to be the Serial interface wired...

    NinaSerial has to be the Serial interface wired to the esp32 Serial0 pins.
    NINA_GPIO0 has to be the pin wired to io 0 of the esp32 and
    NINA_RESETN should be the pin number of the pin wired to...
  10. what issues?

    what issues?
  11. I updated the firmware from Arduino IDE with the...

    I updated the firmware from Arduino IDE with the Nina firmware updater from the Tools menu (with some existing fw version replaced with the patched version).
    esptool.py over the...
  12. just to be clear. no official firmware build has...

    just to be clear. no official firmware build has support for server.accept(). My PR from January is not merged yet in the Arduino/nina-fw repository. The change in WiFiNINA library will not work...
  13. how does the FTP library even compile with...

    how does the FTP library even compile with WiFiNINA? Arduino WiFiNINA and the Adafruit fork don't have server.accept().

    esp8266 and esp32 server.available() works as (EthernetServer).accept(), but...
Results 1 to 13 of 13