Forum Rule: Always post complete source code & details to reproduce any issue!

Search:

Type: Posts; User: rbhollabaugh

Search: Search took 0.00 seconds.

  1. Replies
    61
    Views
    4,527

    Sticky: In file included from...

    In file included from /home/rich/Arduino/arduino-1.8.10/hardware/teensy/avr/libraries/Ethernet/src/Dns.cpp:8:0:
    /home/rich/Arduino/arduino-1.8.10/hardware/teensy/avr/libraries/Ethernet/src/Dns.cpp:...
  2. That's it. Works fine now. Thanks for your help!

    That's it. Works fine now. Thanks for your help!
  3. Some more testing. I have removed the glcd...

    Some more testing. I have removed the glcd library. Version 1.40 works and 1.41 does not work. The Ethernet.begin(mac) call fails. It returns a 0 on version 1.41. On 1.40 it is successful. Can anyone...
  4. Teensy++2.0 Wiz811MJREV1.0 Teensyduino 1.40 vs 1.41 Arduino 1.85

    Hi All,

    Ethernet stopped working when I went from Teensy 1.40 to 1.41. When I run arp I get "(incomplete)" for the MAC address. The other clue is that the GLCD.Print(After Begin) takes about 1 or...
  5. Currently, data from the teensy gets sent to a...

    Currently, data from the teensy gets sent to a desktop PC. Part of the data is the current time on the teensy. If the time is more than a few seconds off, the correct time is sent to the teensy. This...
  6. On the Teensy ++2.0, I'd like to give the 32khz...

    On the Teensy ++2.0, I'd like to give the 32khz crystal a try. Can I use the FlexiTimer2 library to use the crystal? I'm using SPI, OneWire, EEPROM, Bounce2, openGLCD and Ethernet libraries. Are...
  7. MCP1825 3.3V Regulator and Teensy++2.0 and 5volts

    So I've got a Teensy++2.0 that I have been using with the MCP1825 3.3V regulator with power coming from USB. All is working well. But I have a need to run this particular teensy at 5Volts for a quick...
  8. I have a teensy ++2.0 and one of the blue 128x62...

    I have a teensy ++2.0 and one of the blue 128x62 PJRC glcd displays. I used the pin assignements from the KS0108/glcd lib to hook up the display to the teensy. Downloaded and installed the u8glib. In...
  9. u8glib - Universal Graphics Library for displays

    Has anyone used this library on TeensyDuino? If so, what display/controller did you use and what was the outcome? Is there any reason to think this lib would not work with teensyduino?
    Lib code is...
  10. Replies
    2
    Views
    2,108

    Found USB over cat5 extenders. They look...

    Found USB over cat5 extenders. They look promising. Considering the claimed range for these extenders is right around the 200' distance I need to go, I'll recheck the length of the wire run. The...
  11. Replies
    2
    Views
    2,108

    Ethernet Bootloader for Teensy?

    Is there any way I can remotely load .hex files on to a teensy ++2.0 or 2.0? Ethernet using a Wiz812 is my first choice but RS485 or other serial would be an option. The cable run is about 200 feet....
  12. Replies
    4
    Views
    2,776

    Paul, Yes! that fixed it. So I guess the moral...

    Paul,

    Yes! that fixed it. So I guess the moral of the story is that I can't use WDT?

    Thanks,
    Rich
  13. Replies
    4
    Views
    2,776

    Bootloader and Watchdog Timer

    So I just tried using watchdog code I've used on 328s w/o bootloader and it works fine. So I tried similar code on the teensy++2.0. And now it seems the bootloader is out to lunch. Can not upload a...
  14. I chose to use option 1 which cuts the trace....

    I chose to use option 1 which cuts the trace. This works fine during development of my project where I had 5V power and usb connected. Then I soldered the trace back together when I put the teensy on...
  15. Replies
    0
    Views
    1,550

    Teensyduino Version #define?

    Hi,

    I'm using teensyduino with arduino IDE. Is there a #define set up so I can use it in my code to identify what version of teensyduino was used in my program? Like the ARDUINO define.

    Thanks,...
Results 1 to 15 of 15