Forum Rule: Always post complete source code & details to reproduce any issue!

Search:

Type: Posts; User: pd0lew

Page 1 of 3 1 2 3

Search: Search took 0.00 seconds.

  1. Replies
    258
    Views
    6,231

    https://mega.nz/#!63pWUARQ!-3peYGZNpFxMQJ88BoIIuoF...

    https://mega.nz/#!63pWUARQ!-3peYGZNpFxMQJ88BoIIuoF0ciIHZe2LPVy2CydxAq4
  2. Replies
    258
    Views
    6,231

    Problems with the T4 and the second I2C bus, my...

    Problems with the T4 and the second I2C bus, my RA8875 touchscreen works on 19/18 pins perfect. I use a FT5206 controller, but on pins 16/17 the touchscreen is not working. When I use the scanner it...
  3. Replies
    258
    Views
    6,231

    Thanks guys for the new Library!...

    Thanks guys for the new Library!
    https://www.youtube.com/watch?v=ldhHNIvPFIw&feature=youtu.be
    Best,
    Johan
  4. Replies
    4
    Views
    264

    For the Teensy 4 I saw on PRJC web page frequency...

    For the Teensy 4 I saw on PRJC web page frequency input pin 22 and analog write on pin 23.
    I think this is not right.... on pin 8 and 9 this working, this a pity because I need pin 9 for something...
  5. Replies
    258
    Views
    6,231

    Hi mjs513, Kurt, Why you not add the fonts to...

    Hi mjs513, Kurt,

    Why you not add the fonts to the RA8875/fonts dir. has that a reason?
    Best,
    Johan
  6. Replies
    258
    Views
    6,231

    @Kurt, @mjs513, ...

    @Kurt, @mjs513,

    https://www.youtube.com/watch?v=X34qxH-2JwA&feature=youtu.be


    Best,
    Johan
  7. Replies
    11
    Views
    365

    Hi Paul, Yes it compiles, now testing the...

    Hi Paul,

    Yes it compiles, now testing the stuff.

    Thank you like always.

    Best regards,
    Johan
  8. Replies
    11
    Views
    365

    Perhaps nothing to do with the audio, there is...

    Perhaps nothing to do with the audio, there is something else that gives compile errors..
  9. Replies
    11
    Views
    365

    When compiling I get this info : ...

    When compiling I get this info :

    /tmp/arduino_build_162599/sketch/CwDecoderLogic.h:210:42: note: in expansion of macro 'PSTR'
    *bp++ = MakeTableEntry(strcpy_P(fbuf, PSTR("........")), '\x7F');...
  10. Replies
    11
    Views
    365

    Audio board

    The zip file with the project18460
  11. Replies
    11
    Views
    365

    Ok but it's a big file can I use a zip file?

    Ok but it's a big file can I use a zip file?
  12. Replies
    11
    Views
    365

    Audio board for Teensy4

    Hi all,

    I like to use my program for a Teensy 4.0 was used for a Teensy 3.2 and works.
    This is the code for the 3.2 but it gives compile errors on a T4 so what must be changed to get this working...
  13. Replies
    258
    Views
    6,231

    Kurt, That's a pity because you design a nice...

    Kurt,
    That's a pity because you design a nice board but the Teensy need also input.... the most important part is than not added. Please consider this because the new T4 has not decent A/D input. ...
  14. Replies
    258
    Views
    6,231

    Hi Kurt, Can you add also one or two AD's 12...

    Hi Kurt,

    Can you add also one or two AD's 12 bit to the board?
    Best,
    Johan
  15. Replies
    258
    Views
    6,231

    Hi Kurt, Looks great! Best, Johan

    Hi Kurt,

    Looks great!

    Best,
    Johan
  16. Replies
    4
    Views
    264

    @manitou Transceiver on 14000005 gives now...

    @manitou

    Transceiver on 14000005 gives now with a correction factor 14000006 that's very very good.

    I build a correction factor for 1900= 1916, 3500 = 3530, 7000 = 7060, 14000 = 14120.

    The...
  17. Replies
    4
    Views
    264

    Used Arduino IDE 1.89 and Teensyduino 1.47 I...

    Used Arduino IDE 1.89 and Teensyduino 1.47

    I connected in the test sketch 8 and 9 together, I adjusted the analogWriteFrequency(8, 30000000); //

    The serial monitor report exactly 30000000 I...
  18. Replies
    4
    Views
    264

    Frequency count Teensy 4

    I did some tests with my Teensy 4 to count the frequency of my transceiver this work till 21MHz, above I get no readings. (0.0)
    I use input 9 as input and use a small interface.

    17623

    The...
  19. Replies
    258
    Views
    6,231

    @Kurt, @mjs513 My newest board ..... not...

    @Kurt, @mjs513

    My newest board ..... not ready but the begin is there .... use here two AD7991...
    17535
  20. Replies
    258
    Views
    6,231

    @Kurt Do we still talk about the RA8875 from...

    @Kurt
    Do we still talk about the RA8875 from Buydisplay or the RA8875 from Adafruit ?
  21. Replies
    9
    Views
    249

    The frequency count works out of the box, I...

    The frequency count works out of the box, I tested it till 7MHz. Now building a small input circuit with a 74HC14 at 3.3 V

    Thanks again Mike.

    Johan
  22. Replies
    9
    Views
    249

    Aha that make sense, I will test this, if I can...

    Aha that make sense, I will test this, if I can show my transmitter frequency on the display.

    Thanks as always!
  23. Replies
    9
    Views
    249

    Mike, Do I need the code then from @Telephone...

    Mike,

    Do I need the code then from @Telephone Bill or can I use simple the FreqCount library?

    Little confusing ....

    I put the code from @Telephone Bill in the setup and can compile without...
  24. Replies
    9
    Views
    249

    And where is the code below going? CCM_CCGR2 |=...

    And where is the code below going?
    CCM_CCGR2 |= CCM_CCGR2_XBAR1(CCM_CCGR_ON); //turn clock on for xbara1
    XBARA1_SEL3 = 0x001C; //This connects XBAR1_OUT6 to XBAR1_IN28...
  25. Replies
    9
    Views
    249

    Wow this is a difficult one..... so you use pin...

    Wow this is a difficult one..... so you use pin 18 as input for your signal right?

    Is below still working?

    if (FreqCount.available()) {
    unsigned long count = FreqCount.read();
    ...
  26. Replies
    9
    Views
    249

    Frequency input pin Teensy4

    Hi all,

    For my Power and SWR meter with frequency range between 1 to 50 MHZ I like to add a frequency counter.

    Two questions can I use the same diagram so as attached and witch pin on the...
  27. Replies
    258
    Views
    6,231

    @Kurt, How is the Adafruit RA8875 in your...

    @Kurt,

    How is the Adafruit RA8875 in your opnion.... at my place I am was not impressed so as mentioned before. Perhaps you can add fonts to the library.
  28. Replies
    10
    Views
    598

    I think there can be a clear answer to the I2C...

    I think there can be a clear answer to the I2C bus instead of reading 1000 pages.

    This needs more research....

    17343
  29. Replies
    10
    Views
    598

    The maximum I can get is 375 KHz, instead of...

    The maximum I can get is 375 KHz, instead of 1MHz.......


    void TwoWire::setClock(uint32_t frequency)
    {
    port->MCR = 0;
    if (frequency < 100000) {
    // 100 kHz
    port->MCCR0 =...
  30. Replies
    10
    Views
    598

    Hi, I don't think it's that simple for a Teensy...

    Hi, I don't think it's that simple for a Teensy 4.... see picture
    about 100KHz

    17342
    Best,
    Johan
  31. Replies
    10
    Views
    598

    void setup() { Wire1.setClock(1000000) ;...

    void setup()
    {

    Wire1.setClock(1000000) ;
    Right ?
  32. Replies
    258
    Views
    6,231

    @neurofun The viewing angle from both displays...

    @neurofun
    The viewing angle from both displays are awesome 4.3 and the 7" I can not choose for you but the 4.3 " is a perfect screen also the 7" both 800 x 480 pixels.
    17340
    17341
    So make your...
  33. Replies
    258
    Views
    6,231

    no go for a capacitive !

    no go for a capacitive !
  34. Replies
    258
    Views
    6,231

    good choice!

    good choice!
  35. Replies
    10
    Views
    598

    Hi all, I like to run my AD7991 I2C on 1MHz...

    Hi all,

    I like to run my AD7991 I2C on 1MHz Paul says change some numbers but what to change to get 1MHz for the I2C bus? In my case I use SDA1 an SCL1..

    Best,
    Johan
  36. Replies
    258
    Views
    6,231

    Hi Kurt, Please choose the right one with no...

    Hi Kurt,

    Please choose the right one with no loose touchscreen controller, those days the FT5206 is integrated on the board and you need I2C and int pin so it's simple like that go anyway for a...
  37. Replies
    258
    Views
    6,231

    @Kurt No ribbon cable .... on the RA8875...

    @Kurt

    No ribbon cable .... on the RA8875 display is a 40 pins header and I use normal wires but keep it as short as possible.

    Best,
    Johan
  38. Replies
    258
    Views
    6,231

    4.3 on the photo17330

    4.3 on the photo17330
  39. Replies
    258
    Views
    6,231

    4 wire SPI, no font chip, 5VDC and FT5206...

    4 wire SPI, no font chip, 5VDC and FT5206 touchscreen controller the 4.3 " is very very sharp and still 800x480 pixels.
  40. Replies
    258
    Views
    6,231

    Probably yes, but see the difference in real no...

    Probably yes, but see the difference in real no fonts no graphics and no buttons and the price is more or less the same. Compare both display is also difficult because the RA8875 can also used as...
  41. Replies
    258
    Views
    6,231

    This makes the difference, sharp as a knife, fast...

    This makes the difference, sharp as a knife, fast and we have a working library:D
    17328
    Best,
    Johan
  42. Replies
    258
    Views
    6,231

    Hi Kurt, The Adafruit RA8875 is a terrible...

    Hi Kurt,

    The Adafruit RA8875 is a terrible one.... I have one but I like to put it in the garbage tray. No fonts no speed.. worth less to try. I can send you a good display for free. The only...
  43. Hi Mike, Thanks for the quick answer, then I...

    Hi Mike,

    Thanks for the quick answer, then I will wait for that.
    How do I know when this ported to the 4 ?

    Best,
    Johan
  44. Is there a test sketch for the Teensy 4? Best,...

    Is there a test sketch for the Teensy 4?

    Best,
    Johan
  45. ADC not working on Teensy 4 or not know how to handle...

    Hi all,

    I try to #include <ADC.h> but I get a lot of errors....on my Teensy4

    n file included from /home/holstein/arduino-1.8.9/hardware/teensy/avr/libraries/ADC/ADC.h:45:0,

    Any...
  46. Replies
    258
    Views
    6,231

    See video: ...

    See video:

    https://www.youtube.com/watch?v=qZKrgPWQ_Q0&feature=youtu.be

    73' PD0LEW, Johan
  47. Replies
    258
    Views
    6,231

    Bechmark: SPI 23MHz screen:800x480 -...

    Bechmark: SPI 23MHz

    screen:800x480 - rotation:0
    Benchmark Time (microseconds)
    Screen fill 16472
    Test Pixel 19
    Test Pixels 12367
    Text ...
  48. Replies
    258
    Views
    6,231

    Aha there must be changed one line too for the...

    Aha there must be changed one line too for the RA8875Usersettings.h this will speedup the thing/
    #if defined(SPI_HAS_TRANSACTION)
    //SPI transaction enabled library----------------------
    #if...
  49. Replies
    258
    Views
    6,231

    Yes ... a small one : || defined(__IMXRT1062__ on...

    Yes ... a small one : || defined(__IMXRT1062__ on several place .... that's was it.
  50. Replies
    258
    Views
    6,231

    @mjs513, The tiny PCB is home made a AD7991...

    @mjs513,

    The tiny PCB is home made a AD7991 I2C 12 bits works also very nice with the T4.

    @Kurt,
    I included the new library's, it compiles without errors and runs smoothly.
    17326
    ...
Results 1 to 50 of 105
Page 1 of 3 1 2 3