Does anybody have a Eagle lib of the T4.1 including the 6 pins for the ethernet connection? Or have a mechanical drawing so i can make a Eagle lib for the T4.1
I have ordered 2 pcs of T4.1 and som...
Type: Posts; User: Gigabyte
Does anybody have a Eagle lib of the T4.1 including the 6 pins for the ethernet connection? Or have a mechanical drawing so i can make a Eagle lib for the T4.1
I have ordered 2 pcs of T4.1 and som...
I use AnalogWrite with the 7" 8876 display from Buydisplay, no problems.
But I think my ALS code give full value at at 255, not 256.
Hi everybody in the thread.
I just received an email from EastRising stating the 7.84" as more or less obsolete, since the supplier if the glass (panel) CPT is out of business (bankrupt).
I asked...
I recommend you to purchase a MAX31856 based ready made module, from eBay, Adafruit etc.
I'm using 2 and 4 channel modules from "playingwithfusion" , good quality, very stable, and can be used both...
Your board looks amazing, I just ditched the T. 4, because it too hard to integrate properly in to a product made rady for an EMS to produce.
How does the bottom side of your board looks like?
If you need a bootloader chip, why not un-solder one from a T. 4 board?
It was more like a piece of information, regarding amount of dedicated CS / DC pins on the T4. 0.
The Ra8875 does not need a DC pin.
I just ditched the 4.0, because of the low pin count, and missing SD socket.
Even if I use an external SD socket, the flex socket used in Teensy 4.0, Is very difficult to source, especially in...
I purchased 1 pcs of teensy 4. 0 from OSH.
Shipping time was 8 days to Denmark, PCB is of cause purble, no pins, no pinout 'postcard', but works as the official PJRC board.
Amazing product for...
I have used the Nextion in the past, i used the 7 inch model with capacitive touch.
1) I was not pleased with the editor, strange issues, sporadic loss of elements on the screen.
2) The fonts...
Hello members.
I'm in the process of designing a new version of my Data Logger for Temperature, Humidity Atmospheric Presure ETC.
In the past i have designed a similar type of logger, based upon:...
Some years ago i did a design of a Temperature & Humidity data logger using an RJ45 connector (HY931147AE) with integrated magnetics and 2 set of Diode bridges.
The deign uses the old EN28J60, with...