Forum Rule: Always post complete source code & details to reproduce any issue!

Search:

Type: Posts; User: defragster

Page 1 of 10 1 2 3 4

Search: Search took 0.08 seconds.

  1. Something is ODD indeed - using post #1 sketch...

    Something is ODD indeed - using post #1 sketch and commenting out the line :: AudioOutputTDM2 tdm_out;

    Really messes with the output. Instead of printing the ASCII HEX of the incoming character...
  2. Hopefully this is the direction you are looking...

    Hopefully this is the direction you are looking for?

    Look for : ...\hardware\teensy\avr\libraries\SD\examples\Datalogger\Datalogger.ino

    Those Examples are under SD and use the TeensyDuino...
  3. That was quick. Those results being less than...

    That was quick.

    Those results being less than T_3.6 aren't beyond belief due to the change going along with the note in post #2.

    That is the four ports in IRQ_GPIO6789 - 6,7,8,9 are shoe horned...
  4. Teensy 3.x has a different architecture and that...

    Teensy 3.x has a different architecture and that IRQ doesn't exist in the T_4.x hardware design.

    That code will need edited.

    On the T_4.x's 1062 processor as prepared on entry to setup() all...
  5. Cool. The T_3.5 and T_3.6 have twin DAC's. ...

    Cool. The T_3.5 and T_3.6 have twin DAC's.

    But as Jp3141 notes I saw this on the item page: VOR 1/2 POSITIONING ACCURACY: Less than +-2.0 degrees (w/ synchro input); Less than +-2.1 degrees (w/...
  6. Indeed that is 3 years old - exactly what I was...

    Indeed that is 3 years old - exactly what I was thinking of : forum.pjrc.com/threads/45854-Battery-backed-NV-RAM

    Odd the T_4.x doesn't have that many bytes - but nice all the T_3.x's do.
  7. Thanks KurtE - A magic number is a good keyword...

    Thanks KurtE - A magic number is a good keyword for search
  8. It has probably been too long and non-specific...

    It has probably been too long and non-specific keyword to forum search - not sure if the sample was T_3.6 or other - it was by 'Frank B'. The Manual PDF will have some section on the RTC areas. I...
  9. If the T_3.2 had an RTC battery it may have some...

    If the T_3.2 had an RTC battery it may have some storage bytes kept alive. I know the T_3.6 does. Not sure if that section functions without the crystal installed.
  10. Replies
    19
    Views
    183

    The ARM_DWT_CYCCNT when running ticks with each...

    The ARM_DWT_CYCCNT when running ticks with each clock cycle - that test just gets it read once and works as observed to read again for the "==" test.

    When the counter is not running the value is...
  11. Replies
    19
    Views
    183

    yes, if the only purpose is the timed output...

    yes, if the only purpose is the timed output control that will give best response - wasn't sure if that was only task at hand?

    On T_3.2 the CYCNT isn't on by default.

    if ( ARM_DWT_CYCCNT ==...
  12. Replies
    19
    Views
    183

    YMMV :) - I only started reading on post #3 - saw...

    YMMV :) - I only started reading on post #3 - saw p#1 earlier ... and skipped - and then KurtE's #2 reply.
    but freq of a timer when giving sync'd output timing will also tie the frequency.

    Having...
  13. Replies
    19
    Views
    183

    With an UNZIP install - at least on WINDOWS -...

    With an UNZIP install - at least on WINDOWS - multiple IDE/Teensy versions can be maintained ... not sure if that is a helpful option to isolate projects.

    PWM's run in groups off of timers...
  14. Replies
    19
    Views
    183

    All TeensyDuino installed files are 'your' copy...

    All TeensyDuino installed files are 'your' copy and you can edit them in place where installed for a private version.

    However any reinstall or update with TeensyDuino Installer will overwrite that...
  15. That snippet leaves out some context - but it...

    That snippet leaves out some context - but it seems to look like a valid attempt to change a pin before and after executing 'some code' and should generally be executed in order it is programmed.
    ...
  16. Replies
    7
    Views
    176

    Please don't infer or inject ill will to text...

    Please don't infer or inject ill will to text answers - especially across potential language/location barriers ...

    And? says/asks many other things - generally best not to assume the worst!
    ...
  17. Replies
    7
    Views
    176

    The purpose of delay() is to block the current...

    The purpose of delay() is to block the current code execution path for a fixed time. As noted anything else outside the current code path capable of background interrupt or operation will continue.
    ...
  18. Replies
    9
    Views
    190

    Yes, that would be an AdaForum quesion for ::...

    Yes, that would be an AdaForum quesion for :: 2020_8_9_PJRCFeatherTest/2020_8_9_PJRCFeatherTest.ino

    They make a feather shield for Teensy - should have asked about that rather than let it slide. ...
  19. Replies
    7
    Views
    213

    That is RAW CPU counts - yes division will turn...

    That is RAW CPU counts - yes division will turn into time values. And yes, that would be for the loop of 1,000 reads.
    >> 600,000,000 per second on 600 MHz T_4.1 with F_CPU_ACTUAL as run time...
  20. Replies
    37
    Views
    689

    Have either of you used TyCommander? Seems Linux...

    Have either of you used TyCommander? Seems Linux users get to self build it : github.com/Koromix/tytools/releases

    It integrates a loader replacement. It doesn't push the RTC value to the Teensy...
  21. Replies
    9
    Views
    190

    On Windows unzip install I find it here for same...

    On Windows unzip install I find it here for same versions: "T:\arduino-1.8.13\hardware\teensy\avr\libraries\Audio\Audio.h"

    But error is not missing that file - but finding it and saying this file...
  22. This thread :...

    This thread : Using-GDB-with-Teensy-without-hardware-debugger-first-Beta

    For this Library: github.com/ftrias/TeensyDebug
  23. Visual Micro not required, may be integrated...

    Visual Micro not required, may be integrated there - but not related.

    It uses DUAL USB on Teensy and existing GDB CMDline tool already installed with the library on the thread.

    I've tested on...
  24. There is a software debugger interface thread ::...

    There is a software debugger interface thread :: GDB ???

    It will break on a fault and ideally leave a stack trace back to(ward) the point of offense.
  25. Replies
    7
    Views
    213

    Two added good points I left off for brevity as I...

    Two added good points I left off for brevity as I had some place to be ...

    Was going to note the loss of interrupts and switch to ARM_DWT_CYCCNT, also if the times look odd the loop may be...
  26. Glad you got to a working solution! Your...

    Glad you got to a working solution! Your 7-09-2020 post date seems to have fallen into a 'black hole' between various users online that would have seen and made some comment on this.
  27. Replies
    7
    Views
    213

    Notes: > Faster clock speed may not relate to...

    Notes:
    > Faster clock speed may not relate to the resolution time of the Analog read which to some degree uses the similar hardware process on both chips.
    > Code above shows "t = micros();" after...
  28. Replies
    5
    Views
    124

    They are identical in order to the T_4.0, just...

    They are identical in order to the T_4.0, just shifted over to accommodate the parts and match the T_3.6 form factor. As @Saibot notes they are called out lower in the text linked by @Manitou.
  29. Replies
    14
    Views
    293

    Indeed that is a bad splattered blob of solder -...

    Indeed that is a bad splattered blob of solder - good luck making it go away and getting function back.

    Question: Is that lead free solder? All of the solder points are nice and uniform - but no...
  30. Replies
    14
    Views
    293

    I have a pair of the TallDog T_4.0 prototypes...

    I have a pair of the TallDog T_4.0 prototypes built personally here. The first was initial beta where SD didn't come out right, the second is what you'll get and it works well! Having it...
  31. Replies
    3
    Views
    231

    I've gathered a few older ones - when I see them...

    I've gathered a few older ones - when I see them I'll put them on a proper charger - they are charge rate sensitive - smaller ones need fewer Ma pushed at them in proportion to their size. I've not...
  32. Replies
    14
    Views
    293

    Was the USBVIN trace on the bottom cut? How...

    Was the USB<>VIN trace on the bottom cut?
    How much current is the board using? Are active components well grounded to the external supply - and not through the Teensy?

    Had an RGB matrix here...
  33. If a fully functional sketch could be presented...

    If a fully functional sketch could be presented to show the problem it could be observed and then understood/fixed.

    Snippets don't allow a repro of the situation at hand. Even if the time was...
  34. Replies
    7
    Views
    174

    That was tested early in T_4.0 beta and updated...

    That was tested early in T_4.0 beta and updated to work.

    May need to call this function with desired PWM pin:

    void Talkie::beginPWM(uint8_t pinPWM){
    _pwmPIN = pinPWM;
    _hasPShield = false;...
  35. Seeing other code that gets back into the loop...

    Seeing other code that gets back into the loop might be useful.

    One quick test would be to ignore the processing for now and try the code change above to see if it still fails when all available...
  36. Added code # to post #1 Should the final line...

    Added code # to post #1

    Should the final line of the while read as follows? :: while (size != 0);


    static uint8_t buf;
    do {
    if (!usb_configuration) {
    ...
  37. If this were on Windows machine check out ::...

    If this were on Windows machine check out :: github.com/Defragster/Tset
    After installing IDE and TeensyDuino the IDE never needs to be opened - using TyCommander for SerMon ( and optionally upload...
  38. Just for ref - playing with Multi Serial did a...

    Just for ref - playing with Multi Serial did a count of Entropy results for values :: Entropy.random(0, 15)
    This is output from SerialUSB1 - Let it run on two T_4.1's let it run for 1 second and...
  39. Good you made it work - hopefully the under pin...

    Good you made it work - hopefully the under pin leads stay well connected.

    In this image lower left edge you can see dual row SMD pins. They are a bit tight - but supporting them in place to...
  40. Replies
    28
    Views
    583

    Before writing monitor availableForWrite() - was...

    Before writing monitor availableForWrite() - was a recent post on this by Paul -
  41. Replies
    28
    Views
    583

    In that case another contribution by @luni may...

    In that case another contribution by @luni may offer a solution: github.com/luni64/TeensyStep
  42. History - the only WSON chip tested was the 128...

    History - the only WSON chip tested was the 128 MB NAND chip. The NOR Flash tested were the typical 16 MB Winbond chips 'with legs'.

    This is a 32 MB Flash chip that may have an ID that doesn't...
  43. Replies
    13
    Views
    193

    Welcome. Not sure of connections, but looking...

    Welcome.

    Not sure of connections, but looking at the video it appears that Serial3 is wired? Not easy to see clearly with paused video.

    How does that data get sent to the HC-05?

    Not seeing...
  44. Replies
    28
    Views
    583

    Not knowing - or even having looked - how the...

    Not knowing - or even having looked - how the timers are used - is it possible they could be replaced with the higher level code in TeensyTimerTool or the intervalTimer where those low level details...
  45. Do a desired USB aware Blink or other sketch and...

    Do a desired USB aware Blink or other sketch and a Verify build in the IDE .

    A single press/release of the Button should put it in bootloader mode.

    Alternative is to unplug USB and PRESS Button...
  46. Those are what I've seen called 'machine pin...

    Those are what I've seen called 'machine pin headers'

    Much finer gauge indeed than standard headers like those from PJRC.

    icloud.com/photos/0scjgQBiqynuazBSDLBSzqO-A#Pomona_-_Downtown
  47. Replies
    28
    Views
    583

    didn't look .... but Sounds like the timers are...

    didn't look .... but Sounds like the timers are being used low level and not through PJRC interfaces?

    This github.com/luni64/TeensyTimerTool is a set of code that may show needed example or...
  48. Replies
    37
    Views
    689

    @buddym - 1.8.12 had a short life for issues it...

    @buddym - 1.8.12 had a short life for issues it caused and IDE 1.8.13 popped out quickly. Problems may not relate to Ubuntu - or the problem at hand ... but ...

    It might be good to upgrade to...
  49. reposted ......

    reposted ... forum.pjrc.com/threads/62182-Schematic-Review-Modified-Teensy-3-5-Circuit

    closed
  50. Replies
    8
    Views
    230

    Is "a) Every time you call transfer you set ..."...

    Is "a) Every time you call transfer you set ..." just an internal no transmit operation?

    If so that may be faster than compares or tests or state storage. The only thing keeping it queued is data...
Results 1 to 50 of 500
Page 1 of 10 1 2 3 4