Forum Rule: Always post complete source code & details to reproduce any issue!

Search:

Type: Posts; User: MichaelMeissner

Search: Search took 0.00 seconds.

  1. As far as I know, the only alternates are pin 0...

    As far as I know, the only alternates are pin 0 or pin 38 being the preferred CS1 pin, and pin 1 or pin 39 being the MISO1 pin. So, the answer is no, with the outer row pins you've used, there is no...
  2. The Teensy 4.1 does NOT have alternate pins for...

    The Teensy 4.1 does NOT have alternate pins for the SPI buses, except for using SPI1.SetMISO(1) instead of using pin 39.

    <edit>
    Note, I left out the word NOT in the above sentence.
  3. Sure, in the Teensy 4.0 the micro SD pins are...

    Sure, in the Teensy 4.0 the micro SD pins are listed as:

    Pad 34 (MISO2)
    Pad 35 (MOSI2)
    Ground
    Pad 36 (CS2)
    3.3 volt
    Pad 37 (SCK2)
    Pad 38
    Pad 39
  4. Are you using either the micro-SD card or the...

    Are you using either the micro-SD card or the psram/flash memory pads underneath the Teensy 4.1?

    If you aren't using the micro-SD card, you could use something like this to bring out the SD pins:...
Results 1 to 4 of 4