Forum Rule: Always post complete source code & details to reproduce any issue!

Search:

Type: Posts; User: Theremingenieur

Page 1 of 10 1 2 3 4

Search: Search took 0.03 seconds.

  1. I second TelephoneBill. DPLL applications may...

    I second TelephoneBill. DPLL applications may require DAC(s).
  2. Man, read, man.... As the error messages clearly...

    Man, read, man.... As the error messages clearly state, Teensyduino 1.47 isn't compatible with Arduino 1.8.10.

    You have two options:
    Either uninstall Arduino 1.8.10 and install 1.8.9 before you...
  3. Rather time to order a 11 logic analyzer...

    Rather time to order a 11 logic analyzer (chinese SALEAE clone) and do systematic debugging based on facts, not on guesses and suspicions...

    Free next day delivery with Amazon prime:...
  4. If Paul wants to stay with NXP, the next Teensy...

    If Paul wants to stay with NXP, the next Teensy risks to be without DACs, too. From looking at their actual CPU offer, it looks like they are rather about to deprecate the analog modules. Already...
  5. No, there is most probably no settings issue with...

    No, there is most probably no settings issue with the Arduino IDE. But if you want to send debug output to the serial monitor in the IDE, you'll have to add Serial.begin(9600) before...
  6. The Serial1.available() function returns the...

    The Serial1.available() function returns the number of already received characters in the serial buffer. At this moment when you call it in your code, the Teensy hasn't yet received anything from the...
  7. To answer the other part of the question what use...

    To answer the other part of the question what use I'd have for 2 (or possibly mode) DACs on hypothetical future boards: This could greatly simplify my synth circuits by reducing the number of...
  8. One application from pre-MIDI times or for...

    One application from pre-MIDI times or for pre-MIDI devices comes into mind: Controlling analog and modular synthesizers throughs CVs (control voltages). There is one side project on which I'm...
  9. The resistors R1 and R2 are in parallel with the...

    The resistors R1 and R2 are in parallel with the base-emitter junctions of both transistors which will also draw an exponentially growing current as soon as the individual junction voltage starts...
  10. Replies
    4
    Views
    67

    Perhaps use a PIT timer in one-shot mode? If...

    Perhaps use a PIT timer in one-shot mode? If F_BUS is 60MHz on a Teensy 3.6 @180MHz, letting it count to 3 would give 0.05uS before launching an interrupt.
  11. Arduino.cc Download page...

    Arduino.cc Download page
  12. I’d consider using a Teensy LC as a Touch...

    I’d consider using a Teensy LC as a Touch sub-processor and communicating with the T4.0 over I2C
  13. Up to now, there isn’t a real and universal...

    Up to now, there isn’t a real and universal solution for OTA updates for any Teensy, be it 3.x or 4.x.

    This is related to the idea that it’s the MKL chip in conjunction with the main CPU which...
  14. As you can read in the MK20 data sheet and in the...

    As you can read in the MK20 data sheet and in the NXP ADC application notes, reliable ADC measurements with the integrated delta sigma converters require a source impedance lower than 10kOhm. For...
  15. Replies
    31
    Views
    1,266

    No, it was running on external power supply and...

    No, it was running on external power supply and the mouse pointer in the top left corner to prevent the power saver to kick in. I know how to do a software test setup.
  16. Replies
    31
    Views
    1,266

    After reanimating it by plugging the T3.2...

    After reanimating it by plugging the T3.2 (blinking in factory/hid mode) it ran until stalling again. Then, un-plugging and re-plugging the T3.2 makes no more effect, but un-plugging and re-plugging...
  17. Replies
    8
    Views
    194

    It definitively is. Running test here for several...

    It definitively is. Running test here for several hours.
  18. Replies
    31
    Views
    1,266

    Ok. Had to find an USB hub first... Restarted...

    Ok. Had to find an USB hub first... Restarted everything then, with the T4 connected through a passive USB-Hub and an USB-C adapter to the MacBook. Waited for the serial monitor stalling. Then...
  19. Replies
    31
    Views
    1,266

    Closing and re-opening the Serial Monitor shows...

    Closing and re-opening the Serial Monitor shows that the brave Teensy 4.0 continues working. But the serial monitor stalls in arbitrary intervals.
  20. Replies
    31
    Views
    1,266

    It did run for about 10 minutes until serial...

    It did run for about 10 minutes until serial output simply stopped without any error message in the Arduino console :
    17593
    Arduino does not longer eat CPU (2%) but kernel remains on about 70% from...
  21. Replies
    31
    Views
    1,266

    Relaunched it. Keeping an eye on it and will tell...

    Relaunched it. Keeping an eye on it and will tell later.
  22. Replies
    31
    Views
    1,266

    I have (naturally) a Teensy 4.0 handy! :) USB...

    I have (naturally) a Teensy 4.0 handy! :)

    USB print speed test does between 240,000 and 248,000 lines per second. CPU usage is rather high :
    17591
  23. Replies
    31
    Views
    1,266

    Installs on macOS 10.15 Catalina beta 19A558d....

    Installs on macOS 10.15 Catalina beta 19A558d. Didn't compile the Blink example for T4.0 in a first attempt, got an error message telling that Arduino could not access the hardware directory which is...
  24. Replies
    8
    Views
    194

    Actually, as far as I can see, the current...

    Actually, as far as I can see, the current problem with macOS 10.15 (beta) is not with Teensyduino but with the Arduino IDE which actually doesn't compile for either CPU, be it Arduino, Teensy, or...
  25. Replies
    8
    Views
    194

    I’ve installed Arduino 1.8.9 in macOS Catalina...

    I’ve installed Arduino 1.8.9 in macOS Catalina beta, just as a container for installing Teensyduino.
    But for development, compiling and building, I use the Eclipse IDE with Jantje’s Sloeber Arduino...
  26. That’s also a possible “solution”, but why add...

    That’s also a possible “solution”, but why add two bulky 220uF capacitors if one can have a clean signal without these directly at the audio out pins?
  27. Replies
    18
    Views
    1,434

    Vs code + platform io does actually not run and...

    Vs code + platform io does actually not run and throws errors on macOS Catalina (beta). Several people have notified the issue for more than two weeks but nothing happened from developer side
  28. Yes, because the ground of the headphone output...

    Yes, because the ground of the headphone output is a virtual ground which has an offset of +1.65V. If you connect it to a “true” GND, these 1.65V will be shorted and the SGL5000 risks to be damaged.
  29. Ideally, a Note On or Off event would only happen...

    Ideally, a Note On or Off event would only happen at, or wait for the very moment when the amplitude value is zero, or at least very low. This is a technique called zero cross switching....
  30. Replies
    4,287
    Views
    445,296

    Doesn’t a cli version come with Koromix’ TyTools?

    Doesn’t a cli version come with Koromix’ TyTools?
  31. Replies
    10
    Views
    838

    If I remember correctly, the VL53L0X needs to be...

    If I remember correctly, the VL53L0X needs to be configured differently depending on the supply voltage (1.8, 3.3, or 5V). It might be that the Adafruit library does set the VL53 configuration hard...
  32. Replies
    37
    Views
    2,814

    It’s not forcibly about your specific IP address....

    It’s not forcibly about your specific IP address. Internet providers own normally a whole range of IP addresses. If the forum’s anti-spam protection sees too much spam from the same provider’s ip...
  33. I’d guess that the T4 core might run draining...

    I’d guess that the T4 core might run draining only a few milliamps when running @24MHz. But in that chip, there isn’t only the core but also a huge bunch of integrated peripherals which are partly...
  34. Replies
    4
    Views
    336

    Fortunately for PJRC, the first two small T4...

    Fortunately for PJRC, the first two small T4 production batches were rapidly sold out. A huge third batch is currently in the oven and this temporary shortage should be overcome in September.
  35. Replies
    1
    Views
    48

    The answer is no, at least for the Teensy 3.x....

    The answer is no, at least for the Teensy 3.x. The SPI transmit data register can hold a maximum of 16bit. But there is a configuration flag for continuous mode, so that you can transmit your 32bit...
  36. Replies
    4
    Views
    70

    On the PJRC website, in the data sheet section,...

    On the PJRC website, in the data sheet section, you may download the reference manuals for all processors from Teensy 2.0 up to 4.0. These reference manuals describe the inner life of the used CPUs,...
  37. First, I would check what kills your Teensys. Is...

    First, I would check what kills your Teensys. Is is for example the power supply or do you connect peripherals with unfitting voltage or current ratings?

    From my modest experience, fixing a Teensy...
  38. Replies
    3
    Views
    486

    Since this is a users help users forum,...

    Since this is a users help users forum, contributions are always welcome and appreciated. So, why don't you fork the ADC library from gitHub and extend it?
  39. Replies
    69
    Views
    4,022

    The iMX_RT_1064 reference manual with the missing...

    The iMX_RT_1064 reference manual with the missing registers and values for multi-channel SAI1 is here. (You need probably register at NXP to have access. That's free)

    The 5 data pins for SAI1 and...
  40. At least on the T 3.x, there was a historical...

    At least on the T 3.x, there was a historical lower limit for the analogWriteFrequency, caused by the bus clock (48 or 60MHz, depending on F_CPU), the maximum prescaler value (128), and the maximum...
  41. The basic difference is that the T3.x has a...

    The basic difference is that the T3.x has a different way of generating the I2S master clock: as seen in post #1, the single T3 I2S has its own fractional divider to generate the MCLK, while the...
  42. Replies
    69
    Views
    4,022

    Note : The iMX_RT_1060 reference manual has an...

    Note : The iMX_RT_1060 reference manual has an error in the audio section, the extended memory map and configuration for multi-channel I2S with SAI1 is missing. Please refer to the iMX_RT_1064...
  43. If I read correctly page 2068 of the reference...

    If I read correctly page 2068 of the reference manual, the MQS is an add-on block to the SAI-3 and the latter requires naturally an I2S configuration to serve the MQS.
  44. Replies
    3
    Views
    486

    It’s two built-in ADCs inside that mixed signal...

    It’s two built-in ADCs inside that mixed signal MCU. No extra chip. More info in the ADC chapter of the iMRXT1060 reference manual which you can find either on the NXP or PJRC websites.
  45. What I read in different threads is that the USB...

    What I read in different threads is that the USB serial of the Teensy is so quick that it can flood the Arduino Serial Monitor in a way that everything stalls... So, I‘d less worry about the Teensy‘s...
  46. Replies
    69
    Views
    4,022

    I found the cause for my non- or...

    I found the cause for my non- or mis-understanding. The reference manual does mention that SAI1 is multi channel capable but the documentation afterwards does not give any detail beyond the 1 single...
  47. Replies
    69
    Views
    4,022

    Thank you, Paul! I'll have obviously to dive...

    Thank you, Paul! I'll have obviously to dive deeper into the reference manual this weekend. 2 data pins on one I2S for quad channel audio output will be sufficient for my project. Inputs are not...
  48. Replies
    69
    Views
    4,022

    I'd also allow a question to continue thinking...

    I'd also allow a question to continue thinking (my current project does NOT use the audio library, working with 24bit audio @96kHz) before my T4 will arrive: On the T3.x there was 1 single I2S with 2...
  49. Replies
    4,287
    Views
    445,296

    Although I’m 55 years old and wearing progressive...

    Although I’m 55 years old and wearing progressive glasses, I’d give hand soldering a try. IMHO 1mm pitch can easily be hand soldered, if needed with a x2.5 magnifier lens which roughly “lifts” the...
  50. Replies
    4,287
    Views
    445,296

    Congratulations! A huge Thank You to Paul, the...

    Congratulations!

    A huge Thank You to Paul, the PJRC crew, and the beta testers/contributors!

    Unfortunately, I was (and I am still) "under water" with lots of other things going on and could...
Results 1 to 50 of 500
Page 1 of 10 1 2 3 4