Forum Rule: Always post complete source code & details to reproduce any issue!

Search:

Type: Posts; User: Lagelat

Search: Search took 0.00 seconds.

  1. Thank you Alex, i've found and understood the way...

    Thank you Alex, i've found and understood the way to change universes on november, that's ok.
    About color swap, i think changing WS2811_RGBW is not the good solution for me (my init sketch with...
  2. Hello. Have you installed the modified OctoWS2811...

    Hello. Have you installed the modified OctoWS2811 as Alex said:
    Install modified OctoWS2811 lib: https://github.com/alex-Arc/OctoWS2811
  3. OctoSK6812+Artnet+ 280ledsSK6812 x4: Blackled from Alex-Arc

    Hello.
    I use this library wich is the best I found for teensy (Polling very usefull): https://github.com/vertigo-dk/BlackLED

    11 universes works at 44fps with MadMapper.
    I've got 2 problems:
    ...
  4. Yes. I've just modified the Ethernet library to...

    Yes. I've just modified the Ethernet library to work with SPI (not SPI1) and it's working with W5500 (WIZ850 chinese clone), 16K buffer, one socket. I've got just alittle problem of color order but...
  5. YEEEEESSSSSSS! I wasn't replacing the right...

    YEEEEESSSSSSS!
    I wasn't replacing the right ethernet library!
    I was changing the Arduino/contents/java/library but this isn't used when using teensy.
    I needed to replace...
  6. Alex-Arc have already made the #ifdef...

    Alex-Arc have already made the #ifdef W5500_16K_BUFFERS here: https://github.com/alex-Arc/Ethernet...SPI1_max_speed
    He 's working on SPI1 so i need to change SPI1 for SPI and SPIFIFO1 for SPIFIFO....
  7. There are a lot of lines using #ifdef...

    There are a lot of lines using #ifdef W5500_4K_BUFFERS but i'm not able to modify all the parameters to match to my new parameter #ifdef W5500_16K_BUFFERS

    Example: #ifdef W5500_4K_BUFFERS...
  8. It must be a problem with W5500. When using...

    It must be a problem with W5500.
    When using paul's ethernet library i uncomment //#define W5500_4K_BUFFERS but no results.
    When using Alex-Arc's Ethernet library, i can see that the value is...
  9. Hi. I'm back. A madmapper developper say: "The...

    Hi. I'm back.
    A madmapper developper say: "The code you use is wrong, it should use the ArtSync packet (synchronize) that MadMapper sends after having processed DMX output"
    So I try alex-arc...
  10. Thank you Crees to show your sketch here:...

    Thank you Crees to show your sketch here: https://forum.pjrc.com/threads/45760-E1-31-sACN-Ethernet-DMX-Performance-help-6-Universe-Limit-improvements?p=152091#post152091

    I already use one socket...
  11. Thank you nlecaude. It's a liittle better. I can...

    Thank you nlecaude. It's a liittle better. I can get the universe 4 but it's still jerky.
  12. On my original sketch, i tried to use only 2...

    On my original sketch, i tried to use only 2 outputs (const byte numStrips= 2;)
    and so i manage 2240 channels so 5 universes and i get same result, universe 0 to 3 is ok and 4-5 universes are bad. ...
  13. Nice work from alex-arc. I tried his blackled...

    Nice work from alex-arc.
    I tried his blackled sketch. Artpoll works perfectly but i've got same results + a color problem (only white channel)
    Here is a vidéo:https://youtu.be/9t1qzH4T0X0
    I don't...
  14. I've replace Ethernet library by Paul's Ethernet...

    I've replace Ethernet library by Paul's Ethernet library(W5500 fork) and no progress.
    I use this ethernet...
  15. Ok for Artnet size buffer (return to 530 value)....

    Ok for Artnet size buffer (return to 530 value).
    I've tested all this libraries with WS2811 ledstrip but with only one output and two universes (280 RGB leds) and worked fine.
  16. Hello crees. Could you post your correct last...

    Hello crees.
    Could you post your correct last Code please?
  17. I've modified the artnet.h file from #define...

    I've modified the artnet.h file from #define MAX_BUFFER_ARTNET 530 to #define MAX_BUFFER_ARTNET 1060 restart IDE but nothing better.
    The transmition is good in universe 0 to 2, is bad for Universe 4...
  18. I don't know how to do it. Do i have to modify...

    I don't know how to do it. Do i have to modify the Artnet library?
  19. OctoSK6812+Artnet+ 280ledsSK6812 x4: Only first 3 universes ok, next are lagging

    Hello Everybody.
    I really need RGBW strips for a show (I'm a light designer for theater).
    So I use Teensy 3.2 + OctoWS2811 Adaptor + WIZ820io Adaptor. (I've already use this with WS2811 and APA102...
Results 1 to 19 of 19