Forum Rule: Always post complete source code & details to reproduce any issue!

Search:

Type: Posts; User: myhrmans

Search: Search took 0.00 seconds.

  1. Cool. Will test this out and report 😁👍

    Cool. Will test this out and report 😁👍
  2. Ah yes. Something like that, correct.

    Ah yes. Something like that, correct.
  3. Teensy 4.1, or are we talking about the other...

    Teensy 4.1, or are we talking about the other device?
  4. The FTDI is the FTDI 2232h

    The FTDI is the FTDI 2232h
  5. Yeah tried that. Also changed the rx and tx...

    Yeah tried that. Also changed the rx and tx endpoints to match the maximum data from 64 to 512 bytes. It does connect now but the sending never flushes. I checked the code and for a composite device...
  6. Cool. Yeah tried that but I believe our FTDI chip...

    Cool. Yeah tried that but I believe our FTDI chip is not supported currently by the USBSerial class:
    Vid=403 pid=6010
    I believe it's the same as the current supported one. Where do I start when...
  7. Setup USB Host to talk with hub with two FTDI serial devices

    Hey. Have a device with an usb port that, when connected to windows, shows up as two COM devices that are running on the FTDI driver. How would I setup a application to be able to talk to these...
  8. Here is the device information using I'm trying...

    Here is the device information using I'm trying to send and read data from:

    Bus 001 Device 007: ID 0403:6010 Future Technology Devices International, Ltd FT2232C Dual USB-UART/FIFO IC
    Couldn't...
  9. Also interested in a similar solution, did anyone...

    Also interested in a similar solution, did anyone find any solution to this?
  10. Reading from one usb port and emulating a usb touch on another

    Hey!
    Have a usb device that after reciving a few arrays of bytes will start to send raw data about touch information.
    What I want to achive is to first write to that usb device then continously...
Results 1 to 10 of 13