Forum Rule: Always post complete source code & details to reproduce any issue!

Search:

Type: Posts; User: luckyforyou

Search: Search took 0.00 seconds.

  1. it turns out.. That i Need to speak very loudly...

    it turns out.. That i Need to speak very loudly or produce sound very loudly to have an output on the serial monitor(FFT)..

    Seeing this.. I adjusted the gain at the back of the mic module.. But...
  2. I am using A2 for input

    I am using A2 for input
  3. Is there any alternative aside from desoldering...

    Is there any alternative aside from desoldering the 1M smd resistor? I broke my first elec mic, since i persisted replacing it with a through hole resistor..
  4. Hi Paul, This is my connection. this is not the...

    Hi Paul, This is my connection. this is not the one with the module mod.

    https://i.imgur.com/xIH8Dze.png

    Using this code from another user, the RMS PEAK and FFT values changes when i make...
  5. Yes, I did try replacing 1m resistor with 220k....

    Yes, I did try replacing 1m resistor with 220k. But ended up breaking the module(I think), since it stops working and all values are constant, even if i make sounds.

    I have a new one though. this...
  6. Hi pete, I was trying to upload a code to my...

    Hi pete, I was trying to upload a code to my teensy that will at least get the frequency components. the example codes use an audio shield. But I tried editing it to work with max4466 but to no...
  7. Hi Oddson, I understand your reply.. I was...

    Hi Oddson, I understand your reply.. I was desperate for an answer that probably led me to this. in theory also, after collecting all the researches i made, I really think this project is feasible.. ...
  8. Hi Oddson.. i made a sperate topic when i started...

    Hi Oddson.. i made a sperate topic when i started to build this project. had a lot of questions. The very first task alone, im trying to accomplish is very daunting. although it may be very simple to...
  9. Replies
    1
    Views
    563

    been searching the forums.. and read a lot about...

    been searching the forums.. and read a lot about this 4466 mic + teensy debate.. it probably does not have a clear solution?

    also.. found a project that uses the adafruit mic, but no hardware...
  10. Replies
    1
    Views
    563

    help with teensy 3.5 and elec mic

    I have a teensy 3.5 and an elec mic max4466..

    replaced the 1m resistor from the mic module as per advice:...
  11. need advice if feasible, distinguish sound input using max4466/elec mic.

    First of all, my english is not so good. so there might be some problems in my questions. Also, i am new to teensy. But I already am familiar with arduino, so I figured it might just be easy to...
  12. Hi oddson, your reply is exactly what i need....

    Hi oddson, your reply is exactly what i need. Thank you.. I think im all set, and will buy a teensy..

    Surprsingly 3.5 and 3.2 is priced almost the same here....
  13. Sound processing of specific sound or at least range of that sound..

    this is copy pasted from what i posted from arduino forums..

    -------

    Hi, i just need to ask.. as to what type of mic/mic module is capable of distinguishing these two sounds..

    video:...
Results 1 to 13 of 13